|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
April 5, 2009, 05:36 PM | #1 |
Junior Member
Join Date: April 5, 2009
Posts: 2
|
lee Anniversary Reloading Kit can i use differnt dies
I just back ordered the lee Anniversary Reloading Kit
Does any one know if i can use other dies that are manufactured by a different company? I was looking for the 7.62x39 die for this model but could not find one listed |
April 5, 2009, 07:21 PM | #2 | |
Senior Member
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,647
|
with a few exceptions, yes
l Quote:
__________________
USNRET '61-'81 |
|
April 5, 2009, 09:06 PM | #3 |
Junior Member
Join Date: April 5, 2009
Posts: 2
|
rcbs die
Thanks I was going to get rcbs die kit
|
April 6, 2009, 04:38 AM | #4 |
Senior Member
Join Date: September 6, 2007
Posts: 1,204
|
I have a Lee press and I use a set of RCBS dies to load for my 7mm Rem Mag with no problem.
|
April 6, 2009, 08:39 AM | #5 |
Member
Join Date: July 22, 2008
Location: S.C.
Posts: 47
|
I have two Lee presses which I use Lee, RCBS, and Lyman dies with no problem.
|
April 6, 2009, 02:10 PM | #6 |
Senior Member
Join Date: December 4, 2007
Location: Forney, TX
Posts: 725
|
standard dies and shellholders work with Lee kit.
I have the anniversary breach lock kit and very satisfied with 5 digit number of loads made. I am leaning towards a turret, so I can swap calibers more quickly.
__________________
When all is said and done, there is a lot more said than done. |
April 6, 2009, 07:32 PM | #7 |
Junior Member
Join Date: February 13, 2009
Location: South Florida
Posts: 2
|
The 7.62 x 39 Lee die is part number 90565. I use this same die with The 50th Anniversary Kit.
|
Tags |
lee reloading |
Thread Tools | Search this Thread |
|
|