February 28, 2013, 04:53 PM | #1 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Depressing...
So I ordered my Lee Classic Turret a couple of months ago and it arrived today. (Looks like a nice piece of equipment BTW.) I have the brass, bullets and primers to reload .223 and 9mm but have not been able to find powder in 2 months of actively searching. I don't have very many bullets for either.
So I have built my bench, received all the hardware and can't even make my first round Looking forward to getting your input on this hobby but it looks like it is going to be a while longer. Powderless in Ohio, Beentown
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 04:56 PM | #2 |
Senior Member
Join Date: February 15, 2009
Location: Connecticut
Posts: 199
|
What kind of powder do you need. My LGS have quite a bit. If they have what you are looking for maybe we work a deal out... I cant find 223 bullets!
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming...Wow! What a ride!" Give a Liberal a fish, he'll ask for seconds. Teach a Liberal to fish, he'll sign up for unemployment... |
February 28, 2013, 05:15 PM | #3 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
I have only been able to find 250-.223 bullets.
I am not going to be picky about powder. I need something good for .223 and .308WIN. Something like H 335. Also looking for a pound of powder to reload 9mm...something like Bullseye. We have a Cabelas store opening near me next week and I hope they are stocked well...
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 05:17 PM | #4 |
Senior Member
Join Date: December 26, 2004
Location: Louisville KY
Posts: 13,805
|
Same here, my LGS has a fair amount of powder. They're down 50% from normal but it's there.
|
February 28, 2013, 05:36 PM | #5 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
Where are you in Ohio?
__________________
I don't ever remember being absent minded. |
February 28, 2013, 05:40 PM | #6 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Central/North of Columbus.
I found some at two places but it was $50 a pound for powder Bullets were $300/1000 (.223).
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 05:45 PM | #7 |
Senior Member
Join Date: February 15, 2009
Location: Connecticut
Posts: 199
|
WOW! 50/lb! I just bought 2lbs of AR-Comp & 2lbs of AA2460. 26.99 and 22.99 respectively.
I have primers, powder, brass, and a few bullets.... those (bullets) i cannot find. oh, whatever you do... DO NOT order from River Valley Ordnance. They take your order, your money, and thats the last you ever hear from them!
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming...Wow! What a ride!" Give a Liberal a fish, he'll ask for seconds. Teach a Liberal to fish, he'll sign up for unemployment... |
February 28, 2013, 06:02 PM | #8 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Thanks for the heads up on RVO.
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 06:05 PM | #9 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
I was thinking if we were closer I might be able to help you out with some small quantities. I am South of Marietta. By the time you buy gas it would be cheaper local. I'll second that on RVO. They used to be good to buy from. When He died and his wife tried to keep it going it went downhill real fast.
__________________
I don't ever remember being absent minded. |
February 28, 2013, 06:06 PM | #10 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Thanks CrustyFN. Yeah, that is a bit of a jog
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 06:07 PM | #11 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Wondering what kind of selection/price the new Cabelas is going to have. I am able to go in a day early of the opening and purchase so hopefully it is fruitful.
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
February 28, 2013, 06:27 PM | #12 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
Hopefully they will have a little for the opening. I have been to the Wheeling WV Cabela's and it's nice. I went to the Charleston WV Cabela's not too long after it opened and they didn't have much. It was before all the craziness started so it looks like being smaller they won't have much.
__________________
I don't ever remember being absent minded. |
March 4, 2013, 10:04 PM | #13 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Ugh...the search for components and the outrageous prices are really taking a toll on my shooting and overall interest. Can't shoot because I cannot afford $1 a round for plinking ammo. Don't wanna shoot up my "just in case" ammo. Can't find components and when I do they are going to make the shooting cost 3 times loaded rounds of a couple of months ago.
Meh, all dressed up and nowhere to go.
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
March 5, 2013, 05:54 PM | #14 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
Hang in there it will get better.
__________________
I don't ever remember being absent minded. |
March 5, 2013, 06:10 PM | #15 |
Senior Member
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 822
|
I just bought 2 lbs of Accurate #5 26 bucks a pound. good pouder for 9mm 357 45acp 40 s&w.
bullets 9MM 500 ct 40 bucks for SNS hard cast and 32 bucks for 400 357 of the same manufacture. but could only get 600 Winchester LPP and 300 Federal SPP match. |
March 5, 2013, 07:01 PM | #16 |
Senior Member
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,993
|
Seems the price is going up at some suppliers
This is getting depressing. I need some Varget--And it is just nowhere to be found! This should be easing up in a few months, but it seems like forever.
|
March 5, 2013, 07:56 PM | #17 |
Senior Member
Join Date: September 8, 2007
Location: DFW, Texas
Posts: 2,475
|
Seems to be opposite here in north central TX... I can find bullets for days, just can't find primers or powder anywhere local...
__________________
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776 |
March 6, 2013, 07:39 AM | #18 |
Senior Member
Join Date: July 31, 2012
Location: Land between the Lakes
Posts: 267
|
$50.00 per pound.... i hope thats not the new market price....
|
March 6, 2013, 08:10 AM | #19 |
Member
Join Date: January 26, 2013
Location: Northeast, Pennsylvania
Posts: 53
|
Re: Depressing...
My LGS has a decent supply. Just got some Clays yesterday for my wife's 38 for $22 a pound . To the OP...how far are you from Kent? Meeting my son this weekend and can some to you that way. drop me a PM if interested
|
March 6, 2013, 08:39 AM | #20 |
Member
Join Date: January 23, 2013
Location: Central Florida
Posts: 46
|
No powder here in Central Florida that I could find except for at the range I use. Bought 1# of Unique for $26 couple of weeks ago. They then had 1 left on the shelf. I'm loading for .38sp, .357 and .45acp so I'm set for a "little" while.
|
March 6, 2013, 06:25 PM | #21 | |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Quote:
I was able to get some powder and bullets at the Cabelas opening... Now the search continues for: .223 plinking bullets More .223 brass Large rifle primers (I think I have some coming from a friend from a restock at Cabelas) Small pistol primers More powder If I can now load some .308 as soon as those dies come in. Need small pistol primers for 9mm. Bullets for .223 rounds. The search is usually part of the fun, hopefully it lets up soon.
__________________
Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink |
|
March 6, 2013, 07:32 PM | #22 |
Junior Member
Join Date: February 27, 2011
Location: Bucyrus, Ohio
Posts: 9
|
countryboyejb
Cabelas has almost nothing, was there today. Try Fin,Feather and Fur in Ashland or Sportsmans Den in Shelby, call first but they had powder last weekbut would limit you to 1 keg or 2 cans. Good Luck
|
March 6, 2013, 07:41 PM | #23 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
I know how you feel, Bro. I ordered my reloading stuff at the height of the 2008/9 craze. It tooks a couple of months for it to arrive. The plus side, I found out that the CS at Lee Factory Sales is excellent.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
March 6, 2013, 08:05 PM | #24 |
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
Bruno's has great deals on primers...only $60 per thousand, with a 3000 minimum.
I mean, really, who could pass up such a bargain?
__________________
Remington 700/Savage Rebarreling /Action Blueprinting 07 FFL /Mosin-Nagant Custom Shop/Bent Bolts Genuine Cerakote Applicator www.biggorillagunworks.com |
March 6, 2013, 10:11 PM | #25 |
Member
Join Date: April 8, 2007
Location: Houston, TX
Posts: 60
|
Our lgs has been getting powders in at least a couple of times a week. Today they received 80 lbs. of tac.
|
Thread Tools | Search this Thread |
|
|