August 28, 2016, 12:24 PM | #1 |
Senior Member
Join Date: July 8, 2013
Location: Littleton, Colorado
Posts: 1,121
|
Gun Safes
Does anyone have experience with anchoring a gun safe to a post tensioned concrete slab?
|
August 28, 2016, 03:20 PM | #2 |
Senior Member
Join Date: April 28, 2013
Location: sydney
Posts: 135
|
Best bet would be to talk to a builder or structural engineer.
|
August 29, 2016, 07:07 AM | #3 |
Junior Member
Join Date: August 26, 2000
Posts: 11
|
Is this an apartment building or a condo where the floor is a common element?
Any intention of wall/corner anchors in addition? |
August 29, 2016, 08:27 AM | #4 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
I would treat it as an ordinary concrete slab. This is not the same thing pre-tensioned concrete.
|
August 29, 2016, 03:21 PM | #5 | |
Senior Member
Join Date: August 2, 2005
Location: Reno, NV
Posts: 196
|
Quote:
To the OP: Your post-tensioned slab is still a prestressed element, and cutting prestressing tendons could potentially lead to a catastrophic failure. DO NOT BLINDLY DRILL INTO THE SLAB. If you are the property owner, hire a Structural Engineer, licensed in the state where the building is located, and ask his advice. If the building's as-built drawings are available, it may be possible to evaluate the floor without the need for extensive testing. A Pacometer test may be needed to locate reinforcement within the slab. If you are a tenant in the building, forget it. The odds of convincing the owner to hire a Structural Engineer to determine whether/where you can drill for anchors are not in your favor. |
|
August 29, 2016, 05:28 PM | #6 | |
Senior Member
Join Date: December 9, 2010
Location: San Antonio, TX
Posts: 541
|
I would use something like this.
Quote:
|
|
|
|