March 5, 2008, 09:55 PM | #1 |
Junior Member
Join Date: March 5, 2008
Posts: 9
|
Good load for AR-15?
I just bought a AR-15 DPMS with a 16" bull barrel with a 1 X 9 twist. I was wondering if any one else reloads for that type of gun and what they found to be a good load. currently I use 23.5gr of H322 with a 50gr Vmax bullet.
|
March 6, 2008, 12:54 AM | #2 |
Senior Member
Join Date: November 28, 2005
Location: South West Ohio
Posts: 336
|
My brother's DPMS like yours like the 68gr Hornady HPBT with H335.
__________________
Be aware of yourself and everything around you. |
March 6, 2008, 01:13 AM | #3 |
Junior Member
Join Date: March 5, 2008
Posts: 8
|
I agree, buy a glock..
|
March 6, 2008, 01:15 AM | #4 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
The search engine will reveal a number of threads with suggestions. There was a good long one about a month or more ago with folks sharing pet loads for .223.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
March 6, 2008, 01:52 PM | #5 |
Senior Member
Join Date: November 2, 2007
Location: Maine
Posts: 222
|
I have the Bushmaster XM15-E2S with a 20" bull barrel, 1:9 twist.
My pet load is CCI primers, 50 grain Nosler Ballistic tip over 24 grains of IMR 3031. Wicked accurate, can put 3 shots well under a dime at 100 yards. The advantage of loading this recipe, besides the great accuracy, is that 24 grains of the 3031 fills the case to ALMOST a compressed load. So there is no chance of double charging. Kev |
|
|