|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 14, 2012, 05:23 AM | #26 |
Senior Member
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
|
The OP can certainly do a better job of finding components at lower cost. First off, buy in bulk not in amounts for a mere thousand rounds.
Factoring the cost of your time in is rather silly. Do you count the cost of the time spent on your other hobbies? If reloading is a chore, one might want to consider not doing it. |
December 14, 2012, 05:58 AM | #27 | |
Senior Member
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,196
|
Quote:
It would get me out of a lot of yard work.
__________________
Proud member of the NRA and Texas State Rifle Association. Registered and active voter. |
|
December 14, 2012, 07:33 AM | #28 |
Senior Member
Join Date: August 27, 2012
Posts: 321
|
I can find lead cast bullets or plated bullets for about 1/2 of what your calculations show for jacketed bullets. The bullet cost is the most significant component of the total reloading expense.
If your stuck on reloading jacketed bullets for pistol rounds, you will probably not save much money, however. If you use cast or platted bullets, however, the savings are real. The cost savings for rifle reloading is generally, significant - even using premium bullets. I don't reload only to save money..... I love to experiment and it is an interesting hobby where I can learn a lot. I'm a CPA in public practice for 32 years so I do cost calculations for reloads often and I shop for BARGINS in reloading components. ...that is part of the fun. |
December 14, 2012, 08:24 AM | #29 |
Senior Member
Join Date: December 5, 2009
Posts: 1,411
|
I don't figure the cost of equipment into my reloading. I could sell my press for what I paid for it today. In a few more years I will probably be able to sell it for even more. I think it will keep up with inflation or fairly close to it. Dillon's No B.S. warranty even transfers with the press.
I buy components in bulk so my prices are much lower that listed by in the OP. I don't load .45 apc hot so my cases probably get lost long before they wear out. I use WST powder and depending on the weight of the bullet used I average around 5 grains of powder per load. That means around 1400 loads per pound rather than 1000. Using Tula primers from Powder Valley and ordering enough to help out with HAS-MAT shipping brings down those cost as well. I order bullets on line in quantities of several thousand at a time. Another way to cut costs. I did the math last year to see how long it would take to cover the cost of my equipment from the local price of ammo compared to what it costs me to reload. It came out to 7 months with a Dillon RL550b. Yea, I load quite a bit. When adding a caliber it takes less time and ammo to recover that cost. Even loading 9 mm is cheaper to do compared to factory ammo. I get loads I like by reloading my own. I don't have to run all over town trying to track down enough ammo to make it fun to shoot for a few hours at the range. I guess one day I will have to check out how much per hour I'm making reloading. I don't have to include the cost of equipment since it isn't loosing value. I don't have to count cases since they came from once fired brass (mine). It will be just bullets, powder and primers for my costs. I will have to look to see what ammo in the store costs now to figure the rest. I probably make more money per hour reloading than I do working at my job. |
December 14, 2012, 04:05 PM | #30 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
Bulk buying brings benefits before breaking bank.
What is it with folks saying no savings loading 9pm? My initial $600 outlay (RCBS Rock Chucker kit, two pistol die sets, plus some extras) was recouped in less than 4K rounds of 9pm.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
December 14, 2012, 04:33 PM | #31 | |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
Quote:
I have to admit, I'm a little confused at all the people bitching that even the worst case scenario proving reloading saves money, and a roadmap for others thinking of getting into the hobby isn't good enough, because I didn't squeeze every last penny to make it best case scenario? I could have included casting. But not everyone can use cast bullets. Not everyone can have powder and primers shipped to their doorstep. |
|
December 14, 2012, 04:40 PM | #32 |
Senior Member
Join Date: December 3, 2011
Posts: 558
|
I think it was a good post JD. It can be easy to think of reloading as a way to make cheap ammo when someone is thinking about getting in to reloading, but we who are now kneedeep in it (neck deep?) know it is not as cheap as it seems. Fortunately, the benefits are far greater than we probably expected- far more shooting on whatever ammo budget you do have to spend and much better results than factory ammo.
And of course, the satisfaction that comes from seeing your own ammo make good groups, take game, etc. |
December 14, 2012, 04:45 PM | #33 |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
Exactly, it was aimed more at the folks who are thinking of starting, than the ones who know about Grafs, Powder Valley, and have an electric pot in their detached garage.
|
December 14, 2012, 04:58 PM | #34 | |
Senior Member
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
|
Quote:
|
|
December 14, 2012, 05:10 PM | #35 |
Senior Member
Join Date: September 8, 2010
Posts: 495
|
Reloading gives me greater flexibility in the rounds I shoot and allows me to budget my shooting much better.
Let's say I spend $500 on a moderate setup, as opposed to buying factory rounds. 9mm ammo can be had for $10 per box, while my reloads cost $7.50 per box. The break even point is 10,000 rounds. Ok, sounds bad, right? Not really. I had to buy 1,000 lots of 9mm to get that price break. That's $200 every time I order ammo! That can get tight some months. Reloading let's me budget better! I now spend about $100 or less a month on ammo... $35 will buy about 1,000 primers at a local store $85 will buy 1,000 projectiles online $20 will buy enough Power Pistol for over 1k rounds. Point is, I can spread my costs out over a much longer period of time. Also, I can now load more exotic and expensive ammo using the components I bought for other calibers. Like .38 super, same bullets, powder and primers as 9mm. Everything I buy for one can be used in the other. If I save up enough money to buy a few components in bulk, then I get an even better deal. Last edited by testuser; December 14, 2012 at 05:15 PM. |
December 14, 2012, 05:35 PM | #36 |
Senior Member
Join Date: May 30, 2007
Posts: 138
|
In todays time...
Reloading allows me to have a nominal supply of ammo on hand. So I dont have to try to get to the store for a couple boxes of ammo,and any impulses I might come up with. It also relieves abit of pay day stress that might be present when I need to purchase a couple of boxes of ammo. Reloading is not as affordable / cheap as it was when I strted in the 70's I also no longer cast lead bullets ,to much time trouble and cost now-a- days. Last I casted was 1990 I find it's far easier to buy lead "tailor mades" in bulk. Even though shipping costs are getting rediculous. |
December 14, 2012, 06:54 PM | #37 |
Senior Member
Join Date: November 3, 2006
Location: NH
Posts: 145
|
Sounds like reloading isn't for you.
More primers on the shelves for the rest of us With that said, I reload 9mm for $12 per box of 100 with jacketed 124gr bullets, once fired brass, and winchester primers. Plus I get lots of brass from friend that shoot but do not reload. The cheapest factory in my area is $21 per 100. I use a Lee Classic Turret press and total investment including dies, scale, etc was $250. That paid for itself in less than a year. With 45acp and .223 that I am looking to start, the cost difference is even greater. But then again, I am getting a Dillon XL650 soon haha...but that is because I love gadgets and enjoy reloading. It is an additional hobby for me now, not just a mean to save money while shooting. |
December 14, 2012, 07:05 PM | #38 |
Senior Member
Join Date: December 5, 2009
Posts: 1,411
|
Often is the case when you get into reloading at first, you get what your mentor has or what ever they sell locally. Once you get started you get into looking for all the deals to stretch your reloading dollar as far as it will go. Or you look for something that will increase your output per hour to keep up with the ammo you're now shooting.
Reloading is a great hobby that goes with shooting. How much have we spent on other hobbies or sports? Equipment is just the price you pay to get into a hobby or sport. I think the cost or savings should be figured by the cost of continuing to hobby or sport. I guess everyone will look at things differently. One thing I know is I haven't saved any money so far reloading. I have sent a lot more rounds down range than I did before I got back to reloading this time. I tend to spend as much on reloading per month as I did when I just bought factory ammo. |
December 14, 2012, 07:19 PM | #39 | |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
Quote:
I took a shopping list from a Cabelas store so the numbers were easily repeatable. I took a Cabelas so it wasn't some fly by night sale that isn't available today and gone tomorrow. I took a Cabelas, because you can walk in the front door and walk out with whatever you want, usually- while a small mom and pop may have to special order without the inventory. I took a Cabelas store because they don't have great prices, but (considering the name brand involved rather than Joe Bob's garage plated bullets available on the internet near you, unless you live in Massachusetts or a couple other sad sad places) they aren't exactly horrible either. There was just a thread about trying to find the progressive press for less than Cabelas had it on sale lately. I took a Cabelas store because everyone and their sister around here pretty much knows who they are, where they are, and what they are, reputation and target market wise, while referecnces to Grafs, Powder Valley, and their like would not be nearly as recognizable. I took a Cabelas store because I could put everything in one shopping cart, and it was easy. I didn't have to take this from here, that from there, and then search around for yet another thing from yet a third place to get the cheapest of all three. I could figure out how many pounds of powder it took for 1000 rounds, add that much, a brick of primers, and a thousand bullets, divide that subtotal by 1000 and bingo, easy cost per round on the reloads. I compared that cost to three different price tiers... the have-to-really-search-for-it Federal value packs that are ridiculously cheap, and thus hard to find, the usually-there-and-standard-plinking-WWB that most recognize off the bat, and the LGS store that... to put it politely- marks their price based on the captive audience that are the folks renting a handgun from them. I lowballed every single benefit available from reloading. I did mention I was taking worst case scenario right? You saw that part? Even accounting for a paltry three reloads per brass, Brick and mortar prices on the components, compared to 30 bucks a box for almost impossible to find value packs, you still save money. I couldn't make it any harder, and proved you will still save money in the long run. I proved you could even "pay" yourself for making the rounds and save money. |
|
December 15, 2012, 02:19 AM | #40 |
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
So where IS the breakeven and how much can I pay myself to load my ammo?
This summer I devised a spreadsheet to show the breakeven point for rolling your own ammunition. It generated some of the same controversy this thread is experiencing when I posted it.
It included amortizing the initial cost of the equipment, the money value of your time (or the money you have to pay someone else to mow your lawn to free up your time to load) and even the value of the time you had to spend to learn to load. Here are the formulas: (Copy and paste starting at cell B2) 350 140 35 28 6 0 20 10 10 0 25 50 100 =B15*(B3/1000+B4/1000+B5/(7000/(B6/(1-B7)))+B8/100/B9) =+B17/B15 =+B12/B13-B18 =1000/B10*B19 =(B2+B11*B20)/B19 =+B21/1000*B10 then copy and paste this starting at cell c2 Cost of the loading tools Bullets (per thousand) Primers (per thousand) Powder (per lb) powder load (grains per round) spillage/shrinkage (I guess at 0% unless specified otherwise) Brass (per hundred) # of times each case is used (account for loss in this estimate. If Brass cost is zero, use 1) Time required to load 1000 rounds. Include EVERYTHING. Picking up, cleaning, sorting, inspecting, filling powder measure, primer tubes, etc. Initial time learning to load Cost per box for purchased ammuntion Rounds per box referred to above Incremental round count (50, 10, 20, 100: your typical production batch) (Calculated) Cost per increment loaded (Calculated) Cost per round (Calculated) Savings per round (Calculated) savings per hour. Your "wage" if you choose to see it that way. (Calculated) Your breakeven point, in rounds produced (Calculated) Your breakeven point, in hours Of some interest might be the content of cell B20. That is your "wage", or more to the point, what you are saving per hour. Note also that that "wage" is figured into your breakeven point as part of the cost of your learning how to load. Some people will load even if that figure is zero. Those are the ones who really enjoy loading, or who cannot find their caliber of ammunition anywhere on retail shelves. Enjoy Lost Sheep FOUND IT! What's my TIME worth, loading? (Monetizing your time at your press) http://www.thehighroad.org/showthread.php?t=663065 and this similar thread http://rugerforum.net/reloading/1671...-analysis.html might as well pull them ALL together. Last edited by Lost Sheep; December 15, 2012 at 02:59 AM. |
December 15, 2012, 09:50 AM | #41 |
Senior Member
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
|
For the factor of time. I do not factor in money for when I am on my own time. It does not cost me anything. Except the times when I spend a very long time reloading. Then it cost me having an angry wife.
Just kidding on the wife part. She says I am worthless anyway. So my time is not worth factoring on the money part. (3 attempts at humor.) When someone ask me about investing in reloading I give a simple heads up. Be ready to invest 3 things. 1. Money (Buy what you can honestly afford. Note that the most expensive does not make it the best either in quality, or filling your needs.) 2. Time (Yes it takes time to reload. If you are in a super duper hurry, or do not have that much time to invest. Stick with factory ammo. You will be more happy, and less pressured. Besides when reloading being a hurry leads to bad things happening.) 3. Attention. (Paying attention to what you are doing, and knowing the why you are doing it will help in preventing mistakes that can cost a world of things. Likes damaged/destroyed guns, ruined brass, and components. Or worse yet. Injuries/fatalities.) Truth be told someone can start out for little money with a few simple tools, a reloading manual, and components.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you. |
December 15, 2012, 10:06 AM | #42 |
Senior Member
Join Date: October 28, 2007
Location: Upper Indiana
Posts: 609
|
To those that factor in their time.
Do I count my time while eating? Nope Do I count my time while sleeping? Nope Do I count my time while taking a shower? Nope Do I count my time driving to and from the range? Nope Do I count my time while shooting? Nope Do I count my time while BS'ing with my buds? Nope Do I count my time while reloading? Nope Do I count my time while earning money? Not anymore, retirement is a wonderful thing. Seems as if there are a few folks who need to get a life!
__________________
U.S. Army Veteran NRA Certified Range Officer |
December 15, 2012, 10:11 AM | #43 |
Member
Join Date: November 25, 2012
Location: Southern Illinois
Posts: 31
|
It's a HOBBY. If you can save a little money or a lot of money good for you. Quit arguing about it.
|
December 15, 2012, 01:37 PM | #44 |
Senior Member
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,562
|
Wow yet another thread about time wasted reloading! This has got to be the 100th I have seen on this forum!
If everything is about how much your time is worth then you need to stop and smell the roses and hug your kids. It not worth a dime. It's how you spend it that counts. TheoShooter, is right.
__________________
NRA Life Member, SAF Member |
December 15, 2012, 01:39 PM | #45 |
Junior member
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
|
"Quit arguing about it"
This thread is a discussion. Some threads are more argument than anything else. |
December 15, 2012, 02:57 PM | #46 |
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
Time is money?
Some people don't seem to understand:
It's NOT about the money. Money is simply a way of quantifying something to be measured. Some folks (most here on the forum, I think) would load whether or not it saved money on ammunition. For me, asking how much per hour I save (or pay) is simply satisfying a curiosity. If my thinking about the question offends you, I am sorry... that you cannot accept a different world view than your own. Lost Sheep |
December 15, 2012, 04:15 PM | #47 |
Senior Member
Join Date: May 29, 2008
Location: now living in alabama
Posts: 2,433
|
You cant count the cost of labor. You are not trying to retail and this is done to both save money and give you some enjoyment. If you were not reloading, you would probably be spending money on entertainment. I suppose that if you want to add the cost of labor, then off set it by how much you would spend doing something else ie: Having some drinks with the boys, visiting your local gentlemens' club, going to a concert. You get the idea.
__________________
No such thing as a stupid question. What is stupid is not asking it. |
December 15, 2012, 09:51 PM | #48 |
Senior Member
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,196
|
How much does it cost us to participate in internet forums?
__________________
Proud member of the NRA and Texas State Rifle Association. Registered and active voter. |
December 16, 2012, 01:08 AM | #49 | ||||
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
Quote:
Quote:
Quote:
Quote:
Lost Sheep p.s. No offense meant by this post in any way. Having fun is just part of the benefits I get for my $2.50 per hour in addition to valuable advice and useful knowledge. |
||||
December 16, 2012, 01:38 AM | #50 | |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
Quote:
|
|
|
|