|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 5, 2013, 08:20 PM | #1 |
Senior Member
Join Date: April 4, 2005
Location: NE Indiana
Posts: 560
|
Why do they make heavy weight hollowpoints?
This question confounds me to no end. For example most major ammo companies make 180grain hollow points in .357, and 300gr hollow points in .429. I have always read and been told that, shooting humans and anything up to deer level you want hollow points, but anything above deers requires hardcast.
Im not the only one that gets confused about this. Their are numerous threads by people wanting bear defense loads. They see 44mag hollow points in 240gr and up and think its a .44 it will be just fine for bear. Yet i keep hearing anything bigger then a deer requires hardcast for full through and through penetration. This is becoming a issue for me now. The place i vacation has black bears and they get up to decent size. For now i have been carrying my hand loaded copy of https://www.buffalobore.com/index.ph...t_detail&p=288 My ammo clocks a little slower then theirs do. Im running right around 950fps. So for calibers like the .44 magnum(specifically) what is the truth behind the ammo? Do hollowpoints in .44 work on bears? I thought that .44mag hollowpoints were made tougher? I would love a good education on this, im tired of guessing and wondering and not knowing the full story. So my question is this, if hollowpoints have no place on bears, why do they continue to make heavy weight hollowpoints(and JSP for that matter) in calibers most common people feel are bear suitable? |
January 5, 2013, 08:24 PM | #2 |
Senior Member
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,562
|
Larger animals have more flesh and fat to penetrate. If you use a hollow point it may expand and not penetrate deep enough to hit the vitals.
Most handgun caliber hollow points are for humans not animals.
__________________
NRA Life Member, SAF Member |
January 5, 2013, 08:26 PM | #3 |
Senior Member
Join Date: May 22, 2005
Location: USA The Great State of California
Posts: 2,090
|
Why are you concerned what other people think ?
Manufacturers make what sells.
__________________
Hook686 When the number of people in institutions reaches 51%, we change sides. |
January 5, 2013, 08:36 PM | #4 |
Senior Member
Join Date: August 9, 2011
Posts: 1,246
|
It depends on what you want. A heavy for caliber hollow point will penetrate deep, but hard cast will go deeper.
That ammo you have should work fine on black bears. |
January 5, 2013, 09:15 PM | #5 |
Senior Member
Join Date: April 4, 2005
Location: NE Indiana
Posts: 560
|
hook and xfire, im sorry but your posts did not help. I was not talking about standard anti personel hollowpoints. I was talking about the heavy for caliber ones for .44mag and for the .357.
Why make them if they are only useable on deer and deer sized game? Deer dont require 300gr hollowpoints to kill. I know they make what sells, but are they doing the public a diservice by not fully informing them of the capabilities of the bullets they are peddling? |
January 5, 2013, 09:22 PM | #6 |
Senior Member
Join Date: November 11, 2006
Posts: 2,519
|
Can't speak as to why, ...
but when I arrived in WA state, I called the Sierra techs and inquired what is recommended for hiking / backpacking in the NW Cascades.
It was recommend that I reload using the heaviest FMJ bullet for the caliber carried, to deliver a deep penetrating and bone smashing round. They also recommended commercial rounds that used a HARD CAST lead bullet. |
January 5, 2013, 09:39 PM | #7 |
Senior Member
Join Date: April 4, 2005
Location: NE Indiana
Posts: 560
|
Jroth, that only reinforces my issue then. If hardcast is required for anything larger then deer, why make any hollowpoints in .357 and .44mag in heavy for caliber sizes?
Sadly there is no way to test these bullets out short of hunting with them. Strangely enough, on Sierra's website, i checked there faq page. I typed in .44mag for bears and up popped a answere from stephanie saying to use there 300grain Soft point. She said to use it becuase it had a tough outer jacket and a harder lead core. 6% antimony Last edited by mordis; January 5, 2013 at 09:45 PM. |
January 5, 2013, 09:51 PM | #8 |
Senior Member
Join Date: October 4, 2008
Location: N E Ohio
Posts: 221
|
Really. Who cares what a manufacturer makes. If you know that hollowpoints work for two legged threats, and hardcast works for anything above whitetail, then it shouldn't matter weither a manufacturer makes a heavy hollowpoint or not. Just don't buy it.
__________________
Don't do anything Stupid. And don't let Stupid do anything to you. |
January 5, 2013, 09:58 PM | #9 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
The selection of bullets options is because there's a market. Enough other people choose the heavy HP to make it worthwhile for the ammo makers to produce those options. The specific "whys" are irrelevant.
|
January 5, 2013, 10:52 PM | #10 |
Member
Join Date: March 15, 2009
Posts: 61
|
They make big, heavy hollowpoints because people will buy them, because they think they need them. If you want bullets for bears, get the biggest, heaviest, hottest hard cast bullets you can find. You want bullets that'll bore through large amounts of fat and muscle, and smash through big, heavy bones.
Look into Buffalo Bore ammo. Expensive, but serious. https://www.buffalobore.com/index.ph...oduct_list&c=6 Not for lightweight handguns though, they need to be pretty tough, like Rugers & etc. Last edited by Rondog; January 5, 2013 at 10:58 PM. |
January 5, 2013, 11:20 PM | #11 |
Member
Join Date: November 28, 2012
Location: Guthrie, OK
Posts: 31
|
Buffalo Bore is where it's at!
__________________
umop apisdn wI |
January 5, 2013, 11:59 PM | #12 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,273
|
carbines
The heavy for caliber hollowpoints are very useful out of pistol caliber carbines. The longer tube allows fair velocities, well over what a typical handgun could generate. Launch one of those heavy .44's out of a carbine with enough twist to stabilize it, and you have a rig that hits hard.
Another arena are the long barreled single shots like the T/C', with 10-14" tubes they can likely drive the heavies hard as well. Finally, at least some of those heavies were likely intended for the .444 Marlin, which recieved a real boost in usefulness to its fans when it received slugs in the 265 and up range. |
January 6, 2013, 12:10 AM | #13 |
Senior Member
Join Date: October 13, 2004
Posts: 163
|
They make them because they sell.
|
January 6, 2013, 12:18 AM | #14 |
Senior Member
Join Date: April 18, 2011
Posts: 540
|
I've used heavy JHPs (the Hornady 300 gr XTP @ 1150fps) in my stainless Ruger 7.5" SBH for black bear (280 lbs) and it worked quite well.
__________________
QUANTITATIVE AMMUNITION SELECTION |
January 6, 2013, 12:32 AM | #15 |
Senior Member
Join Date: September 27, 2012
Posts: 397
|
Whenever anyone considers using a handgun for defense against Black Bear I suggest studying the configuration of the Black Bear skull.
The Black Bear has unique features not common to other bears. One of these is a very narrow brain case and eyesockets that have next to nothing but soft tissue behind them. A shot head on and dead center in the eye will not come near the brain case. To hit the brain through the eye you'd have to fire from an angle. The most direct route to the Blacky's brain is through the nose. Due to the highly evolved sense of smell, perhaps the most sensitive in the animal kingdom, the Blacky's entire head is adapted to facilitate that sense. His brain sits lower in the head than other bears. Theres little but soft tissue and cartilage between his nasal cavities and his brain. Those nasal cavities are huge. |
January 6, 2013, 09:00 AM | #16 |
Senior Member
Join Date: April 4, 2005
Location: NE Indiana
Posts: 560
|
I understand that they will hit harder out of a .444 rilfe, but then wouldnt the same issue with them appear? Namely to much expansion and little penetration?
Im not sure why this is bothering me so much. Maybe i should load up some of these loads and go kill a bear with them.. Im trying to think like a average gun consumer. They are heading to bear country and stop in to gander mountain and say i need bullets for bears. I did this and was told to load up with Hornady LeverEvolution........ So ya, theres people out there giving advice that would likely do them no good. |
January 6, 2013, 09:18 AM | #17 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,766
|
Because some people buy them for whatever reason.
If you don't want them, don't buy them. Simple as that.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
January 6, 2013, 10:49 AM | #18 |
Senior Member
Join Date: April 4, 2005
Location: NE Indiana
Posts: 560
|
I know if I don't want them don't get them. I want to discuss what these hunting hollow points do and what there good for. Which I think I'm understanding.
Hollow points seem to be preferred for large non dangerous game. Starting to make sense. They aren't built as solidly as a bear. |
January 6, 2013, 12:14 PM | #19 | |
Senior Member
Join Date: April 18, 2011
Posts: 540
|
Quote:
Got the same results with the Hornady .44 Magnum 300 gr XTP JHP- right through the shoulder, looked like somebody loosed a blender in the bear's chest, heart and lungs were a mess, and a 1 1/2" to 2" exit wound. My stainless 7.5" SBH sends 'em buzzing along at ~1225 fps, FWIW. Bears are tough, yes, but a properly constructed heavy .44 Magnum JHP placed where it oughtta be will do the job.
__________________
QUANTITATIVE AMMUNITION SELECTION |
|
January 6, 2013, 12:20 PM | #20 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
Read everything written by Elmer Keith. You are not going to learn the answers to your questions on an internet forum. (you might but you're going to have to sort through an awful lot of nonsense.)
|
January 6, 2013, 12:58 PM | #21 |
Senior Member
Join Date: December 28, 2006
Posts: 4,341
|
Bullet choice is a personal thing. Some folks like light and fast and some like heavy and slow. Some like to see a hole with blood coming out on both sides of an animal and some like to see one big hole with lots of damage. None is completely right or wrong. The key is to find what works well for you in the specific scenario and what shoots well outta the gun in your hand. Sometimes this choice can be subjective(in one's head) and sometimes it's more objectively made. But being comfortable, confident and proficient with whatever decision one makes is paramount. Not all HPs are made the same. Those lighter in weight and made specifically for HD/SD generally expand more at slower velocities than the heavy bruisers made for hunting big game. But one manufacturers 240 gr JHP will not automatically have the same terminal performance as another. A difference of 200 fps in a .44 mag can mean large differences in expansion and whether or not the bullet holds together. While SPs are thought to hold together better and give more penetration this is not always so. Bullet construction is as important as bullet type. Because of the unlimited variables involved, there is no simple answer. I prefer SPs over HPs for shooting anything larger than varmints(two legged or four). I'm one that prefers two holes and penetration thru bone. But I made my choices mostly from my own and to a much smaller extent, the experience of others. While I use the knowledge gleaned from books, magazines and internet forums, I am not foolish to take any one opinion as gospel. I'm also not that foolish to put all my eggs in the basket of one author, regardless of how famous he is. Over the years, I have made poor choices along with the good. Again, it was my own experience, that was the proof in the pudding. There is a myriad of scenarios out there and a vast array of opinions. The reason there are so many choices in bullets is just to satisfy that diversity. I enjoy having those options and enjoy the opportunity to try something different. Many times tho, when I find something that works well, I tend to stick with it.
|
January 6, 2013, 01:39 PM | #22 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
Hardcast is not REQUIRED for larger animals, it's just a viable choice.
A strongly constructed heavy hollowpoint can both expand AND penetrate, and they're useful on animals larger than people & deer. This doesn't have to be an obsessive "issue" to lose sleep over. Denis |
January 6, 2013, 01:46 PM | #23 | |
Senior Member
Join Date: February 27, 2008
Location: midwest
Posts: 4,209
|
the heavy hollow points like the 180gr 357 xtp and the 300gr 44 xtp give you the ability to have expansion of a lighter bullet without giving up the penatration that a lighter hollow point does.
__________________
rather be judged by 12 than carried by 6 Quote:
|
|
January 6, 2013, 03:10 PM | #24 | |
Senior Member
Join Date: May 22, 2005
Location: USA The Great State of California
Posts: 2,090
|
Quote:
http://www.m4carbine.net/showthread....ght=.44+magnum You can try to make logical judgements about it but it comes down to different strokes for different folks. You use what you like, I'll use what I like. Why try to make one size fits all ? Why try to make it some great intellectual analysis ?
__________________
Hook686 When the number of people in institutions reaches 51%, we change sides. Last edited by Hook686; January 6, 2013 at 03:35 PM. |
|
January 6, 2013, 04:15 PM | #25 |
Senior Member
Join Date: July 3, 2012
Location: San Antonio, TX
Posts: 449
|
I like that they sell heavy .44 hollow points because my .44 rifle is zeroed for a 300 grain bullet. I have not gone hunting with it yet but have tested 300 grin hard cast for a bear hunt hopefully this spring and a 300 grain hollow point with no noticeable change in point of impact. So now I have two different hunting loads that do not need to be re zeroed.
|
Thread Tools | Search this Thread |
|
|