|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
April 9, 2000, 05:42 AM | #1 |
Member
Join Date: April 8, 2000
Posts: 20
|
I want start reloading the .40S&W.
Should I buy the 4 die set from Lyman or a traditionnal 3 die set from another maker ? Some say a 4 die set with a separate crimping die is better. Why ? What do yall think ? |
April 9, 2000, 08:05 AM | #2 |
Junior member
Join Date: January 18, 1999
Location: Kokomo, Indiana USA
Posts: 674
|
Hmm..
I like to crimp separatly but I'm using a Dillion 550. If you are using a single stage press then use the 3 die set to save time. If you have a Lyman turret press.. go for the 4 die set. |
April 9, 2000, 10:00 AM | #3 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
|
April 9, 2000, 11:42 AM | #4 |
Senior Member
Join Date: December 31, 1999
Location: Middle Georgia, USA
Posts: 13,198
|
Even when I was struggling with a single stage press loading for .45 ACP, I used a separate taper crimper, because I am convinced it is the right way to load for an "auto" pistol.
I don't see that you have a choice, except whether to buy it separate or as part of the die set. -------------- All my ammo is custom made. [This message has been edited by sensop (edited April 11, 2000).] |
April 9, 2000, 12:39 PM | #5 |
Junior member
Join Date: January 23, 2000
Posts: 467
|
I crimp with the 4th station on the Dillon 550B. So I bought Dillon dies. However, on a single stage, a three die set will save you a lot of time. I personally feel that you should crimp sepeartely.
1911 Forum |
April 9, 2000, 12:58 PM | #6 |
Member
Join Date: April 8, 2000
Posts: 20
|
Well I use a RCBS Rock Chucker.
Thank you guys ,I think I will go for the Lyman 4 die set. |
Thread Tools | Search this Thread |
|
|