8 Bore Jones Underlever

StolzerandSons · October 27, 2013, 12:25 PM

I started a new build this week. I won't be doing a fully detailed build documentation of this one because it will basically be just like the other Jones Underlevers I've built. I will post updates though as the build progresses.

http://youtu.be/QSPBuVOXG8k

Link to the blog/videos:
http://stolzergunsmithing.wordpress....-rifle-part-1/
or
http://stolzergunsmithing.wordpress.com/

Enjoy,

Colin

StolzerandSons · February 4, 2014, 02:29 PM

I know it has been many months since I have update this build or my blog at all for that matter. I’ve had a few set backs with this project and ended up missing the delivery deadline. First real set-back was when my milling machine broke the main drive gear in the geared head unit. In any case the video below is the current state of the 8 Bore, basically all of the metal work is complete and it is ready to be inlet into wood. Since I missed the delivery deadline on this project and this was being built on a trade deal I had worked out, I simply returned the Trade rifle to the customer with compensation for delivery of his rifle to me and for the small amout of shooting I did with it while it was in my possession. Unfortunately that leaves this 8 Bore as a speculation build in my shop, so I’m going to set it on a back burner and work on it as time permits. I’ll be moving on to the next paying project shortly.

http://stolzergunsmithing.wordpress....-rifle-part-2/
or
http://stolzergunsmithing.wordpress.com/

Enjoy,

Colin

Dixie Gunsmithing · February 4, 2014, 02:45 PM

Great!

Keep it up!

mattL46 · February 4, 2014, 04:35 PM

Beautiful work!

October 27, 2013, 12:25 PM	#1
StolzerandSons Member Join Date: June 13, 2013 Location: Washington, Kansas, u.S.A Posts: 24	8 Bore Jones Underlever I started a new build this week. I won't be doing a fully detailed build documentation of this one because it will basically be just like the other Jones Underlevers I've built. I will post updates though as the build progresses. http://youtu.be/QSPBuVOXG8k Link to the blog/videos: http://stolzergunsmithing.wordpress....-rifle-part-1/ or http://stolzergunsmithing.wordpress.com/ Enjoy, Colin

February 4, 2014, 02:29 PM	#2
StolzerandSons Member Join Date: June 13, 2013 Location: Washington, Kansas, u.S.A Posts: 24	I know it has been many months since I have update this build or my blog at all for that matter. I’ve had a few set backs with this project and ended up missing the delivery deadline. First real set-back was when my milling machine broke the main drive gear in the geared head unit. In any case the video below is the current state of the 8 Bore, basically all of the metal work is complete and it is ready to be inlet into wood. Since I missed the delivery deadline on this project and this was being built on a trade deal I had worked out, I simply returned the Trade rifle to the customer with compensation for delivery of his rifle to me and for the small amout of shooting I did with it while it was in my possession. Unfortunately that leaves this 8 Bore as a speculation build in my shop, so I’m going to set it on a back burner and work on it as time permits. I’ll be moving on to the next paying project shortly. http://stolzergunsmithing.wordpress....-rifle-part-2/ or http://stolzergunsmithing.wordpress.com/ Enjoy, Colin

February 4, 2014, 02:45 PM	#3
Dixie Gunsmithing Moderator Emeritus Join Date: April 27, 2013 Location: Ohio Posts: 1,923	Great! Keep it up!

February 4, 2014, 04:35 PM	#4
mattL46 Senior Member Join Date: February 9, 2013 Posts: 656	Beautiful work!