|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 28, 2008, 11:08 PM | #1 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Trigger group lubricant?
I was told by someone to clean the trigger group out with brake cleaner and leave it dry... Lubricant attracts abrasives. Any thoughts on this? If I should lubricate what's the best product?
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
February 29, 2008, 12:58 AM | #2 |
Member
Join Date: November 29, 2007
Posts: 48
|
The instructions that came with my Jewell trigger say to simply flush with lighter fluid after cleaning barrel and not to lubricate.
|
February 29, 2008, 01:07 AM | #3 |
Member
Join Date: January 13, 2008
Location: Missouri
Posts: 37
|
Lighter fluid, i.e, Ronsonal. It will flush the trigger and when the volatiles have evaporated, there is just enough residual lubricity to get the job done without serving as an attractant to dust and other debris.
|
February 29, 2008, 01:11 AM | #4 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Great! Now that makes more sense. Thanks.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
February 29, 2008, 02:22 AM | #5 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Or you can use a dry lube. Nothing there to attract or hold dirt.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
February 29, 2008, 01:59 PM | #6 |
Senior Member
Join Date: November 13, 2004
Location: PacWest
Posts: 455
|
What action, what trigger?
What action, what trigger?
From Maple Valley I'd ask the guys at Ben's Loan or the Dan Cowan around the corner if he's still there. Bill Wilson for example has specific suggestions for the fire control parts on the guns with his name on them and they aren't about running dry. For the M4 and MForgery Pat Rogers did a piece for SWAT a while ago - For this that and the other there are different rules and different products depending on the firearm and the environment. I used to use Iskendarian Cam Lube but that's not necessarily the best for your trigger and your environment. Last I heard Maple Valley wasn't exactly a desert though. |
February 29, 2008, 02:37 PM | #7 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Maple Valley gets some rain. I'll probably hunt out towards North Bend in the fall and they get more. I've just inherited a 25 year old Interarms Mark X sporter .25-06 with the factory adjustable trigger.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
February 29, 2008, 02:40 PM | #8 |
Senior Member
Join Date: December 29, 2004
Posts: 3,351
|
No lube is not enough, but if you can see it there is to much.
You need the barest film to prevent corrosion while not atttracting dust and grit. |
March 2, 2008, 12:38 AM | #9 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Thanks for the advice guys. The Mark X is a little obscure these days so it's hard to find specifics on what to do for lubrication, etc.. I bought the Ronsonol and although I was sceptical (I've never noticed a residue left over from it and yes I used to smoke). It was cheap so what the hay.. The trigger feels much smoother now. Unless I hear otherwise for this trigger, all is well.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
March 2, 2008, 01:29 AM | #10 |
Senior Member
Join Date: April 7, 2006
Posts: 10,985
|
All is well-until it rusts.
|
March 2, 2008, 07:38 AM | #11 |
Senior Member
Join Date: June 12, 2007
Location: Grayling, Michigan
Posts: 737
|
Dry Slide.
Martyn
__________________
US Army Retired NRA Benefactor Life Member JPFO |
March 2, 2008, 10:28 PM | #12 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Dri slide... I've seen it for sale online. I'll check into it. My dad says they would use gun oil when he was a kid in NE Oregon. It would freeze during elk season if it got too cold so they would always bring a jug of Prestone antifreeze to splash on the trigger group. Would have been in the mid to late 1950"s. He says that was the ticket, and it protected against corrosion!
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
March 2, 2008, 11:31 PM | #13 |
Senior Member
Join Date: February 5, 2002
Posts: 1,819
|
Depends on the platform and what it is spec'd to do best with in and in certain environments.
On a shotgun, I have shot 25K rds and more in a year, never cleaned a trigger group, and just concerned myself with chamber and extraction. I ran one shotgun, for one year and put over 40,000 shells through it, and never dropped trigger group. Who has time to clean when they shoot, and if not shooting, reloading, and if not reloading driving somewhere to shoot? 40,000 rds and I used the Kleen-bore Formula 3 that was the free kit for shooters...when Kleen-bore came onto the shooting scene. That shotgun still runs, and has over 300,000 rds thru it. Just shoot the darn thing....
__________________
Use Enough Gun TFL Alumni |
March 4, 2008, 09:48 AM | #14 |
Senior Member
Join Date: February 20, 2006
Location: Ohio
Posts: 2,300
|
for a "normal" rifle trigger or an after market like a timney I use the brake cleaner (if your trigger is plated this will eat off the plating) or just compressed air. To lubricate I either use a good teflon spray or graphite. Always make sure to inspect your weapons before going to the range or out in the field. this will help to alleviate a lot of the "oh sh!!!" when you get out to the range or on the opening day of the season and realize you have a problem with the weapon.
JOE
__________________
Lifetime member VFW and NRA "Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green |
March 4, 2008, 07:03 PM | #15 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
You'll find lots of opinions. Frank White at Compass Lake Engineering wants you to use Neco Molyslide on his AR trigger. It is a two-stage trigger, so you have the take-up portion of the trigger to press through, and lubrication keeps that stage smooth.
I am a little leery of using brake cleaner or any other degreaser and not following up with a lubricating material that will offer some corrosion resistance. I've left 1911 trigger groups unlubricated for extended periods (7 or 8 thousand rounds) and not had a problem. This was shooting lead bullets, and some of the lube seems to vaporize and blow around and condense all over the gun, and that may help? The last couple of years I've been experimenting with two permanent lubricants. One is Moly-Fusion, which puts a micro-thin lubricating metal conversion layer on parts. This is completely dry and very durable (you can put it in a barrel and it withstands firing and keeps fouling down) and offers some added corrosion resistance. The other is Plate+ Silver which is based on an older NASA technology, but which also withstands firing in a barrel for quite a number of rounds. Though Moly-Fusion should have it beat on peak temperature tolerance, it seems to work as advertised. Plate+ Silver is a colloidal suspension of acid-neutralized sub-micron size molybdenum disulfide particles in a petroleum-based lubricant that bonds electrostatically to iron. To use either lube, you would start by cleaning the trigger group parts. Mineral spirits works fine to final clean before treating with Moly-Fusion. The Moly-Fusion is applied in a mix with mineral oil or mineral spirits. You warm the object to be treated and, keeping it warm, rub the treating mix in for 20 minutes or so (I use a Q-tip for trigger and sear engagement surfaces). Then you can clean the parts off with mineral spirits and wipe them dry. For Plate+ Silver, you would first clean the parts. Mineral spirits works, again, but there is a Plate+ Green that is the petroleum-based Plate+ component only (no moly) and which can be used to prep the surface like a pre-cleaner. Once you are ready for the Silver version, soak the parts in it for 72 hours at room temperature, then remove them and wipe all visible traces off the surface with dry patches. In both cases you will have lubrication in place and working. The limitation of Plate+ is it does not work on aluminum, while Moly-Fusion does. Moly-Fusion, for my money, gives a more positively smooth feel to two sliding surfaces, while Plate+ has a slicker feel. Both lubricant's have much lower sliding coefficients of friction than steel on steel; 0.07 is advertised for Moly-Fusion, and 0.02 is advertised for Plate+ Silver. Hardened steel on hardened steel is about 0.78 static and 0.42 sliding, by way of comparison. I prefer Moly-Fusion on a two-stage trigger and Plate+ Silver on a single-stage trigger. The former seems to clean up hesitation a bit better in the first stage of the trigger, while the latter seems more inclined to allowing a sudden slip, which a crisp trigger should have. I suspect the difference in static and sliding friction coefficients is lower for Moly-Fusion, but would have to test that carefully to be sure my perception isn't just subjective? Plate+ is simpler and more idiot proof to apply, but also more prone to creeping into places you don't want it or to having excess remain behind on pins and in holes and springs, from where it can splash or creep out onto other things. You just have to make your own choice about that aspect of it, and make your own decision as to which you might prefer to use? I have not tried applying one over the other on purpose, though I have used one on surface A and the other on surface B of two sliding parts, and it worked, but nothing special happened. I suspect Moly-Fusion, since it will work through oil, can probably be successfully applied to something previously treated with Plate+, but the reverse would not go so well other than to fill in any defects in the Moly-Fusion coating. More fuel for experimentation, there. Knock yourself out.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
March 4, 2008, 10:07 PM | #16 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
I've used brake cleaner with good results. It's non corrosive to aluminum and steel, won't hurt springs, etc. (what it was designed to clean safely on a car). I use the non chlorinated type to eliminate unneeded exposure to methylene chloride. The drawbacks are that it is quite flammable and because it causes metal to get cold, it can make rifle parts sweat. With a trigger group I spray short bursts with time between for the metal to warm back up to ambient. I noticed no condensation with this method.
As far as lubricant goes, I'm looking for something that does well in rain and prevents corrosion yet doesn't get gummy. I'll be using this rifle on the west side of the cascades in an area that averages 100 inches of rain a year and temps typically run 35-45ºF during deer season. Deer season here is often a constant cold rain for days on end unless you hunt on the east side.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
March 5, 2008, 01:19 AM | #17 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
I generally choose between 3 options:
- Break Free CLP - Tetra Lube - PTFE-based dry lube CLP and Tetra will protect from rust and maintain lubricity. PTFE dry lube will coat all the parts with a very thin coat of PTFE (Teflon). I use Tetra for all my trigger mechanisms.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
March 5, 2008, 09:22 AM | #18 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Never lubed a bolt rifle trigger assembly. Never had any rust in the trigger assembly, either. I've used the lighter fluid method, successfully. I'm using a JP trigger/hammer assembly in my AR, and I either use a judiciously-applied drop of Mobil 1 or Brownell's Action Lube Plus on the sear engagement mating surfaces.
|
March 5, 2008, 05:29 PM | #19 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
In Jewell's own words.
Performance Shooter: What maintenance does the trigger require? Jewell: I recommend they use it clean and dry. No lubrication whatsoever. The metal surfaces are hard as hell; they’re heat-treated to a 58 or 59 Rockwell C hardness. We don’t have to worry about galling because the loads are so light at the sear. Performance Shooter: Still, no mechanism is perfect. What’s the biggest problem customers have with the trigger? Jewell: Allowing it to get dirty. They’ll let that Shooter’s Choice cleaning solvent get down in there, and I’ve seen that stuff actually solidify. I’ve seen these parts welded to the sideplates. People will let solvent trickle down into the action when they’re barrel cleaning. It will eventually build up and make the trigger quit working. But because my triggers require so little effort to make the levers move, they are probably more susceptible to getting gunked up. |
March 5, 2008, 05:34 PM | #20 |
Senior Member
Join Date: December 12, 2007
Location: South Carolina
Posts: 592
|
I use 1qt transmission fluid, 1/2qt motor oil, and hoppes9 to thin it. I vary the amount of Hoppes9 to get the consistency that I want for the weather conditions- more if it's colder, less if it's warmer.
__________________
'The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government.' Thomas Jefferson National Rifle Association Life Member |
March 18, 2008, 12:27 PM | #21 |
Junior member
Join Date: February 29, 2008
Location: Indiana
Posts: 83
|
Just a tip to anyone who uses 'lighter fluid'. Coleman Camp Fuel, also known as white gas is the same thing as Zippo fluid/lighter fluid ... only MUCH MUCH cheaper.
|
March 19, 2008, 10:48 PM | #22 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Dude... Incredible idea... Hey, I could go into business. All my stuff runs on propane so after I buy a gallon of fuel I can like sell it by the ounce to people that need to lube their triggers on ebay... Oh, and offer a full trigger lubrication service.. I could set up a contract with UPS, or I could go to the gun range and set up a booth, yeah thats it!!! Now I'm on a roll, I'm gonna buy a 40,000 gallon tank and fill it so i have gas for my Neon...
Really though.. I paid $2 for enough lighter fluid to do a hundred triggers. I hope you use that stuff in your stove or lantern.. But thanks!
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
March 20, 2008, 09:28 AM | #23 |
Junior member
Join Date: February 29, 2008
Location: Indiana
Posts: 83
|
Inspector3711
Here's some stickers you can sell in that business of yours too With your personality and brand of constructive criticism, I'm sure you would make an excellent traveling salesmen. Keep up the good work! |
March 20, 2008, 01:50 PM | #24 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Some people can't take a little teasing. Holy cow, calm down man. I thought you might see the humorous side of what I posted. Sorry if I offended you. Traveling salesman?? hehe Now what if one reads this? I bet he'll be more offended than you.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
March 20, 2008, 02:06 PM | #25 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
RandyStacyE
I reread my reply to RandyStacyE's post. I can see where someone might think I was being a jerk. I have sent a apology PM. I thought it was a light hearted funny reply at the time. Didn't mean to be hard on anyone. The coleman gas is way cheap, I just don't have need for that much of it. Limited storage space in my house. I went too far. I'm Sorry.
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
|
|