The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old September 13, 2012, 06:22 PM   #1
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Reloading Shed



Tore the deck off my house and saved as much of the lumber as I could. Also had a huge pile of old treated 2x4's laying out back. So, figure this will be a nice little place to get away from the lady and make things that go bang. Have an old heating/cooling unit from a hotel room that should be plenty to manage the temp. WIP. Will update.

sudo passwd root
mrawesome22 is offline  
Old September 13, 2012, 06:28 PM   #2
PawPaw
Senior Member
 
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,137
IT looks like it's built strong, I'll say that for it. It should handle the snow loads.

Keep us updated and send more photos as the project develops.
__________________
Dennis Dezendorf

http://pawpawshouse.blogspot.com
PawPaw is offline  
Old September 13, 2012, 07:41 PM   #3
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Will do. I got the floor dug out tonight. I'd like to sheet the roof tomorrow. We'll see. I still gotta get shingles. Doh :banghead:

sudo passwd root
mrawesome22 is offline  
Old September 13, 2012, 07:57 PM   #4
jason75979
Senior Member
 
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
I did the same for mine. I insulated the gloors, walls, and ceiling to be able to maintain climate. 12 plugs on 6 breakers in a 10X12 to keep from overloading. I used a normal 8,000 btu window hmr for cooling in the summer and an oil filled radiator style for winter heating. It is both my fishing and hunting/reloading room.
Oh yeah, to seal any cracks I used spray foam which after drying can be cut to install trim if wanted. I didn't want though
jason75979 is offline  
Old September 13, 2012, 08:20 PM   #5
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Yeah I'll insulate it and seal it up tight. That air unit is a big 220v heater/ac unit with a thermostat. It was in a big hotel room, so that thing should be no problem. I made it 8'x12' to accomodate the lumber I had. I was gonna buy trusses until I saw how much they had gone up. Decided to just make my own lol. They would definitely hold a lot of snow.... if we ever got any.

Edit: Sprayfoam: That stuff is HIGHLY flammable. I was using that stuff under the kitchen sink to try and keep mice from getting in. The woman was kneeled down talking to me... fumes built up.... pilot light on stove!!!!!! Kawooossshhhh!!!!!! Flames shooting out of drawers! Oh my!!!! Womans arm hair.... gone!!!! She was not happy. Burnt her skin to a bright red hue.... Lol Be careful.

sudo passwd root

Last edited by mrawesome22; September 13, 2012 at 08:29 PM.
mrawesome22 is offline  
Old September 13, 2012, 08:33 PM   #6
tkglazie
Senior Member
 
Join Date: December 3, 2011
Posts: 558
I second the "built strong" thought. What a tank of a structure. Great idea using the hotel HVAC. Really an ideal application for it.

Last edited by tkglazie; September 13, 2012 at 08:42 PM.
tkglazie is offline  
Old September 13, 2012, 08:41 PM   #7
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
Envious ... Looks like solitude.
1stmar is offline  
Old September 13, 2012, 08:42 PM   #8
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnesota
Posts: 3,577
Nice Set going there. How big is it going to be?.
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Old September 13, 2012, 09:00 PM   #9
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
12'x8'x7'

sudo passwd root
mrawesome22 is offline  
Old September 13, 2012, 09:18 PM   #10
griff383
Member
 
Join Date: August 1, 2011
Posts: 25
Looks awesome, wish I had that much free time and lumber
griff383 is offline  
Old September 13, 2012, 10:40 PM   #11
joshf128
Member
 
Join Date: February 19, 2012
Posts: 51
Definitely jealous.
joshf128 is offline  
Old September 13, 2012, 11:03 PM   #12
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
Oops?

Going to pour a floor? Or intending to leave it gravel? Not bad framing> but you forgot those hurricane rafter hangers I see. _
Sure Shot Mc Gee is offline  
Old September 14, 2012, 12:00 AM   #13
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Poured floor would be nice, but doing this on the cheap.

Wood floor and good drainage. I have block I could use. Maybe half block, half wood. Ehh... Burn that bridge when I get there.

Hurricane raftors lol. I used what I had on hand. Reporposed

sudo passwd root
mrawesome22 is offline  
Old September 14, 2012, 12:55 AM   #14
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
Quote:
I used what I had on hand
Hey no problem if you don't have those hurricane rafter hangers available. Just pound in more 16s to compensate._ _One thing I will say about a gravel floor mrawesome. The benefit of having one. You won't have to worry about a little bit of spilled powder every now and then. _
Sure Shot Mc Gee is offline  
Old September 14, 2012, 01:20 AM   #15
TheSILENTtype
Senior Member
 
Join Date: September 11, 2012
Posts: 139
By the looks of the shed back there, you need an extra 24 bundles of shingles, while you're at the hardware store

Don't forget the wife-is-annoyed-you've-been-outside-too-long-hatch.

Really, this looks like a great idea & cool on salvaging the deck.. makes me want to tear my gazebo down...
__________________
THE SILENT TYPE
TheSILENTtype is offline  
Old September 14, 2012, 09:39 AM   #16
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
After toasting the wife, are you installing a bed in the shed?
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old September 14, 2012, 10:33 PM   #17
scottd913
Senior Member
 
Join Date: April 23, 2012
Location: Texas ... north of houston, east of el paso
Posts: 214
+1 on the bed idea...thats where i take my naps....shhh dont tell the miss's
scottd913 is offline  
Old September 14, 2012, 10:44 PM   #18
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Quote:
Originally Posted by serf 'rett View Post
After toasting the wife, are you installing a bed in the shed?
Lol, that was a few years ago. She does remind me of it from time to time though.

Hmm... fold out cot on the wall....

sudo passwd root
mrawesome22 is offline  
Old September 15, 2012, 09:05 AM   #19
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
Mrawesome, I'm a master plumber do you want me to show up with some fittings and glue???
__________________
Keep your Axe sharp and your powder dry.
hooligan1 is offline  
Old September 15, 2012, 02:07 PM   #20
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Plumbing, bed, ac, heat. TV and a john and I'm all set huh? Lol.

sudo passwd root
mrawesome22 is offline  
Old September 15, 2012, 05:08 PM   #21
hornetguy
Senior Member
 
Join Date: January 14, 2011
Location: on the north side of DFW
Posts: 970
Funny I just found this thread... I'm about to do that very same thing... that is, build a reloading shed. I put up a little greenhouse at the side of the house for my wife, but she decided she didn't want it after all... so, it's gonna come down and a shed is going up.
I'm thinking 10X12, but we'll see how things progress...

Probably wood floor, 2X4 framing. If I bought a shed that size, it would be 1400-1800 dollars... uninsulated, etc...
I think I can do this one for under 750, but I haven't run all the numbers yet.
Should be WAY better, climate-wise, than the garage. Not too difficult to heat up the garage in the winter, but impossible to cool down in the summer.

Keep us updated... more pics!
__________________
I always felt that if I got to the point where I thought it was time to bury my firearms, it was actually time to pick them up..
hornetguy is offline  
Old September 15, 2012, 05:15 PM   #22
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA (Greater Los Angeles Area)
Posts: 2,598
Cut a crescent moon in the door for privacy. I would dig deeper, though. Wood seat? Birch John society; they are a splinter group, and can be a pain in the a$$.
I think I see where this is headed. Wife rules house. Hubby rules the man cave. Guess who gets what in the divorce?
Attached Images
File Type: jpg Door.jpg (29.0 KB, 66 views)
__________________
............

Last edited by Marco Califo; September 18, 2012 at 08:47 AM.
Marco Califo is offline  
Old September 15, 2012, 10:15 PM   #23
Sport45
Senior Member
 
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,196
Quote:
Originally Posted by mrawesome22
Kawooossshhhh!!!!!! Flames shooting out of drawers! Oh my!!!!
Flames shooting out from your drawers? That does sound bad.
__________________
Proud member of the NRA and Texas State Rifle Association. Registered and active voter.
Sport45 is offline  
Old September 17, 2012, 07:00 PM   #24
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 953
I did the same thing when we bought the house since I didn't get my garage or full basement. I put up an 11x14 shed (biggest I could go without a building permit) did all my own wiring and installed a propane infrared heater. Worked out great for me, have all my tools and reloading stuff out there. Shed looks great so far and built on the cheap too is a bonus.

Stu
stu925 is offline  
Old September 18, 2012, 11:32 AM   #25
mxjunky78
Member
 
Join Date: August 2, 2012
Posts: 61
Looks like that will be standing for many years to come. Good work.
mxjunky78 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06170 seconds with 11 queries