Bench and LnL AP & Case Feeder

hcShooter · September 26, 2014, 04:26 PM

Anyone build one of those 2x4 basics workbenches with the shelves on top and use a Hornady Lnl AP with case feeder attached?

Looking to build a 8' x 2' bench (and get the press combo I mentioned) and from what I can tell those shelf brackets are 16" long, and I'm wondering if the shelves need to be built pretty tall to clear the top of case feeder drum.

LE-28 · September 27, 2014, 06:12 AM

The case feeder on mine stands 38"tall so you will need approx 44" to comfortably feed it.

If mine were on a 24" deep bench it would be 11" from the wall.

That should give you perspective on what to expect.

September 26, 2014, 04:26 PM	#1
hcShooter Junior Member Join Date: October 1, 2013 Posts: 5	Bench and LnL AP & Case Feeder Anyone build one of those 2x4 basics workbenches with the shelves on top and use a Hornady Lnl AP with case feeder attached? Looking to build a 8' x 2' bench (and get the press combo I mentioned) and from what I can tell those shelf brackets are 16" long, and I'm wondering if the shelves need to be built pretty tall to clear the top of case feeder drum.

September 27, 2014, 06:12 AM	#2
LE-28 Senior Member Join Date: September 24, 2012 Location: North Carolina Posts: 759	The case feeder on mine stands 38"tall so you will need approx 44" to comfortably feed it. If mine were on a 24" deep bench it would be 11" from the wall. That should give you perspective on what to expect.