|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 15, 2009, 02:57 PM | #1 |
Junior Member
Join Date: March 15, 2009
Location: Mississippi
Posts: 5
|
1858 Remmington New Army .44 (Pietta)
I just got this pistol on Friday. It is my first C&B. I cleaned it up yesterday and took it to the range today. I'm now hooked!!
Over all I'm well pleased with the gun. It's smooth right out of the box and is more accurate than I am. I put 3 cylinders through it without having to stop and clean. The only problem I had was the plunger pin would fall out every time I changed cylinders. Has anyone else had this problem and what would be a good solution? Thanks, |
March 15, 2009, 05:21 PM | #2 |
Senior Member
Join Date: July 23, 2007
Location: Virginia
Posts: 719
|
First off, Welcome to the forum & congratulations on your new piece.
As far as the plunger pin goes, take the rammer assembly out & get a punch that is just slightly larget than the pin in the plunger, take the punch with a hammer & peen the hole a bit to prevent the pin from moving out, do this on both sides & you should never have this issue ever again. |
March 15, 2009, 07:53 PM | #3 |
Junior member
Join Date: December 22, 2008
Posts: 228
|
congratulations on your purchase I love shooting my remmy 44 also!I about eight cylinders through mine without any problems the other day maybe it was the american pioneer powder with crisco.
|
March 15, 2009, 08:07 PM | #4 |
Junior Member
Join Date: March 15, 2009
Location: Mississippi
Posts: 5
|
Thanks Raider2000, I thought about using a punch but was wondering about a future disassembly. however, I don't see a need to take the plunger assembly apart. It can be cleaned and lubricated without disassembly. I'll do that this week.
Thanks |
March 15, 2009, 08:13 PM | #5 |
Junior Member
Join Date: March 15, 2009
Location: Mississippi
Posts: 5
|
tiberus10721,
I'm hoping to catch up with you this week. I'm taking some vacation day and going to the range each day. I have several pistols...380, 1911 Colt 35, 9 mm, and 2 .22's but by far this BP .44 is the most enjoyable to shoot. |
March 15, 2009, 09:04 PM | #6 |
Senior Member
Join Date: July 23, 2007
Location: Virginia
Posts: 719
|
He he, I still have both of ya beat together on my newest Pietta NMA.
on a single outing I've put 10 cylinders through it with no more than a simple wipe to the cylinder & the pin but I've got well over 1300 shots total through it since Nov. 2007. Glad to be of help bud. |
March 15, 2009, 10:43 PM | #7 |
Junior member
Join Date: December 22, 2008
Posts: 228
|
yesterday i when i shot eight cylinders through my remmy I was using 30 grains of american pioneer powder with cornmeal as a filler and .457 balls and crisco to prevent a chain fire.Im not sure but it seems like the american pioneer powder which is a bp substitute mixed well with the crisco to lubricate my gun.I haven't used wonder wads or bore butter yet.the weather right now is pretty cool maybe in the summer time the crisco im using will melt.
|
March 15, 2009, 10:45 PM | #8 |
Junior member
Join Date: December 22, 2008
Posts: 228
|
can anyone theorize why uberti cylinders are so much more than piettas?
|
March 16, 2009, 04:23 AM | #9 |
Senior Member
Join Date: July 23, 2007
Location: Virginia
Posts: 719
|
Because of the Uberti name..
|
March 16, 2009, 09:19 AM | #10 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
March 16, 2009, 02:53 PM | #11 | |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
Quote:
__________________
Liberty and freedom often offends those who understand neither. |
|
March 17, 2009, 07:22 AM | #12 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Quote:
|
|
March 18, 2009, 10:20 AM | #13 |
Senior Member
Join Date: February 22, 2008
Location: SW Washington state
Posts: 2,011
|
Pietta
In my limited experience they can be variable. My SS 7 1/2 target was a piece of junk, I sent it in to Traditions, they did replace it, it was a PITA.
I am however very pleased with the replacement. I have not shot it lately, since I started reloading I don't have as much reason to, my modern pistols are fairly cheap to shoot with reloads, and I don't cast bullets. Hmm, maybe I will sell it.
__________________
ricklin Freedom is not free |
March 26, 2009, 09:16 PM | #14 |
Member
Join Date: March 14, 2009
Location: port richey florida
Posts: 46
|
1858 Remington New Army .44 (Pietta)
I have 5 BP revolvers and have shot for some thirty years.
Bought a new 1858 Remington New Army .44 (Pietta) stainless 8inch. Question , shooting it last saturday first shot dam near every cap falls off. tried 10's and 11's , seems a very loose fit. Was thinking of dry firing each cylinder to (mushroom) the nipples a little. Or should I just replace them. (stainless) thanks guys. |
March 26, 2009, 09:39 PM | #15 |
Senior Member
Join Date: February 22, 2008
Location: SW Washington state
Posts: 2,011
|
Different Brand?
Have you tried Remington #10s? I have had very good results with them on my Pietta 44. I would try that b4 you mushroom your nipples. Caps do differ somewhat.
__________________
ricklin Freedom is not free |
March 26, 2009, 09:41 PM | #16 |
Member
Join Date: March 14, 2009
Location: port richey florida
Posts: 46
|
Remington #10s
All I have is Remington #10s and 11's.
Maby CCI may be better. |
March 27, 2009, 10:18 PM | #17 |
Senior Member
Join Date: February 22, 2008
Location: SW Washington state
Posts: 2,011
|
Are ya pushin hard enough?
It takes a fair amount of force to seat the caps well on mine, I've never dry fired it, and I've maybe fired it a hundred times. Caps are the same fit now as they were new. I did open up the area around the nippples so I can use a snaill capper, some guys use a wood dowel to seat the cap. The 1st (bad) Pietta .44 stainless target I got the nipples were just like the replacement pistol I received. I wonder when they changed nipples, mine is only 2 years old at the most.
__________________
ricklin Freedom is not free |
March 28, 2009, 04:23 AM | #18 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Quote:
|
|
Thread Tools | Search this Thread |
|
|