October 30, 2007, 07:36 PM | #1 |
Senior Member
Join Date: March 19, 2007
Location: maryland
Posts: 535
|
lee loadmaster woes
I am new to reloading and looking back I should have just gone with a simple single stage press.
I have tried and tried, and I cannot get the priming system to work. it some how wedges the primer between the primer seater and the white plastic part. should I sell it? or should I keep trying to fix it?
__________________
I dont have super powers, I have guns. |
October 30, 2007, 09:15 PM | #2 |
Senior Member
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,647
|
Two things come to mind right off. your indexing is slightly off. there is some flashing in the primer trough or it's cover. Take it apart an ensure everything is clean with no extra plastic you might even use a fine file or polishing cloth to smooth it out.
For more help I suggest you PM Benedict1 here on TFL |
October 30, 2007, 10:02 PM | #3 |
Senior Member
Join Date: July 26, 2006
Location: Southern California
Posts: 245
|
MDman--look for a PM from me with all the info you need to get going properly.
|
October 30, 2007, 10:26 PM | #4 |
Senior Member
Join Date: March 19, 2007
Location: maryland
Posts: 535
|
wow thanks alot benedict, the video's are good. will let you know how it goes.
__________________
I dont have super powers, I have guns. |
|
|