New to reloading: 9mm Luger USPSA load recommendations

1SOW · March 19, 2008, 09:41 PM

Sorry, I'm another new soon-to-be reloader asking dumb questions. I would really appreciate some advice from you guys experienced with IPSC/USPSA Production class 9mm loads.

I've been shooting 124gr FMJ reloads from CCCAmmo (rated at 1050fps) and do well with them. I have better luck with 124s shooting steel plate/poppers than I do with 115gr. (CZ75B/4.72" bbl.)
.
I've gathered most of my list of equipment needed, but what I need now are suggestions for type/brand of powder, bullets and loads to use.

I shoot 200-300 rds/week.
Cost, power factor, and cleanliness matter.

Thanks for any magic formulas you're willing to share.

Zak Smith · March 20, 2008, 12:04 AM

My 9mm load is a 124gr plated RN with 4.2gr Titegroup.

mahead · March 20, 2008, 11:35 AM

I run the same load as Zak, works great.

1SOW · March 20, 2008, 11:11 PM

I'm finding a lot of Comp. shooters on 3 forums like Titegroup and W231 with 124s.

tomj44 · March 23, 2008, 11:04 AM

Look here http://www.brianenos.com/forums/index.php?showforum=72

March 19, 2008, 09:41 PM	#1
1SOW Senior Member Join Date: December 2, 2007 Location: South TX Posts: 269	New to reloading: 9mm Luger USPSA load recommendations Sorry, I'm another new soon-to-be reloader asking dumb questions. I would really appreciate some advice from you guys experienced with IPSC/USPSA Production class 9mm loads. I've been shooting 124gr FMJ reloads from CCCAmmo (rated at 1050fps) and do well with them. I have better luck with 124s shooting steel plate/poppers than I do with 115gr. (CZ75B/4.72" bbl.) . I've gathered most of my list of equipment needed, but what I need now are suggestions for type/brand of powder, bullets and loads to use. I shoot 200-300 rds/week. Cost, power factor, and cleanliness matter. Thanks for any magic formulas you're willing to share.

March 20, 2008, 12:04 AM	#2
Zak Smith Senior Member Join Date: December 12, 1999 Location: Fort Collins, Colorado, USA Posts: 2,682	My 9mm load is a 124gr plated RN with 4.2gr Titegroup. __________________ Zak Smith . DEMIGOD LLC . THUNDER BEAST ARMS CORP . COLORADO MULTI-GUN *My PM inbox full? Send e-mail instead.*

March 20, 2008, 11:11 PM	#4
1SOW Senior Member Join Date: December 2, 2007 Location: South TX Posts: 269	Thanks guys. I'm finding a lot of Comp. shooters on 3 forums like Titegroup and W231 with 124s.

March 20, 2008, 11:35 AM	#3
mahead Member Join Date: November 3, 2007 Posts: 22	I run the same load as Zak, works great.

March 23, 2008, 11:04 AM	#5
tomj44 Junior Member Join Date: July 13, 2007 Posts: 13	Look here http://www.brianenos.com/forums/index.php?showforum=72