|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 14, 2013, 03:40 PM | #1 |
Junior Member
Join Date: August 22, 2011
Location: ky
Posts: 11
|
Starting load for m1 garand using imr-4895
I am going to load 150 gr and 163 gr for my M1 garand , ( 30/06) anybody have a starting load using IMR-4895 for both bullets that is safe for oper. rod. thanks for all info
|
June 14, 2013, 04:26 PM | #2 |
Senior Member
Join Date: May 27, 2007
Posts: 5,261
|
My developed loads were for a 150 SMK 47.5 grains IMR 4895 and for a 168 SMK 47.0 grains IMR 4895.
With either bullet start at 45.0 grains and stop where I stopped.
__________________
If I'm not shooting, I'm reloading. |
June 14, 2013, 04:33 PM | #3 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,894
|
|
June 15, 2013, 08:15 AM | #4 |
Junior Member
Join Date: August 22, 2011
Location: ky
Posts: 11
|
thanks for info
|
June 16, 2013, 01:31 PM | #5 |
Member
Join Date: December 5, 2012
Posts: 36
|
imr 4895 m1
I reload for the m1 garand and use imr 4895 with nosler 168 grn custom competition and my load is
44.5 grns imr 4895 and my aol is 3725 and getting good results getting all 10 shots in a 6" black circle at @100 yrds but still working on it good luck steve |
|
|