H&K USP Compact 40 problem

ahankster · December 6, 2007, 09:33 AM

Guys,
I have a USP Compact in 40 that has a problem. It shoots low. With the green dots lined up, it shoots about 5 inches low at 20 feet. High would not be such a problem, but low is really an issue as I can't adjust the sights or buy a front sight that goes down any further.
thanks for any suggestions
Hank

velocette · December 6, 2007, 03:24 PM

Try using heavier bullets. That usually solves the printing low problems of handguns.

roger

December 6, 2007, 09:33 AM	#1
ahankster Member Join Date: February 15, 2007 Location: Mississippi Posts: 19	H&K USP Compact 40 problem Guys, I have a USP Compact in 40 that has a problem. It shoots low. With the green dots lined up, it shoots about 5 inches low at 20 feet. High would not be such a problem, but low is really an issue as I can't adjust the sights or buy a front sight that goes down any further. thanks for any suggestions Hank

December 6, 2007, 03:24 PM	#2
velocette Senior Member Join Date: May 25, 2007 Location: South Florida Posts: 924	Try using heavier bullets. That usually solves the printing low problems of handguns. roger __________________ Trigger control + Breath control + Sight alignment = Gun Control. http://www.hrpclub.info/ NRA Smallbore Prone Master, High Power Master