July 18, 2006, 09:28 AM | #1 |
Member
Join Date: July 8, 2006
Posts: 16
|
CZ 550 .308 Loads
I've got a CZ 550 308 laminated stock varmint rifle. I'm wondering if anyone has any tried and true recommendations for factory ammo, or know of any handloads that work well in this rifle. My range time is extremely limited, so I'd like to cut down on the Columbus method of finding ammunition this rifle likes. I'd appreciate the help.
|
July 18, 2006, 11:10 AM | #2 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,060
|
Unfortunately, owing to normal manufacturing tolerances, two guns that are the same make and model can like different loads. All you can hope for is people reporting that "X,Y, or Z works for me". It doesn't mean it will for you. There is no magic bullet for that. About as close as anything comes would be Dan Newberry's Optimum Charge Weight loads. You have to use the same case (Winchester) and primer (various listed) brands, as well as the same bullets and powder charges with them. There aren't many to choose from yet.
Nick
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
July 18, 2006, 11:30 AM | #3 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,535
|
168 gr Sierra Match Kings and IMR or H-4895;
175 grain Sierra Match Kings and Varget or AA2520. Frankly, best accuracy often comes at or near the maximum, so follow all that boring fine print about starting loads and working up. If you cannot get at least reasonably good accuracy somewhere in there, something is wrong. Yes, you can fiddle and diddle and optimize for your rifle but the above components cover a large percentage of match rifle ammunition so it has to average pretty good. |
July 18, 2006, 03:17 PM | #4 |
Member
Join Date: July 8, 2006
Posts: 16
|
So I should go ahead and shoot with these loads before chamfering out the barrel channel, or will it make a huge difference? Shooting as is won't be a problem, but I wonder if free floating the barrel will make a difference.
And Thanks for the ideas! |
July 18, 2006, 03:47 PM | #5 |
Junior member
Join Date: March 31, 2006
Posts: 1,528
|
well my CZ isn't a 308 but if yours shoot like mine you don't need to fix it
|
July 18, 2006, 05:56 PM | #6 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
Mine liked the 150 and 155 Sierra's with around 44-46 grains of IMR 4064. Never did as well with the 168's or 180's. I use WW brass and Federal Gold primers. Although the best group I ever shot was with surplus WC-852 (50gr) and 150 Sierra's although it was at a very low velocity and not very practical.
|
July 20, 2006, 06:53 AM | #7 |
Junior member
Join Date: December 10, 2001
Location: Burbs of Minneapolis
Posts: 676
|
There are no short cuts to safe reloading, either you have time and inclination or you do not! Period! I do not believe your justified in copy catting other peoples work! What is safe in one gun my not be safe or accurate in your gun! You have to do the leg work! No free lunchs! Nope!
Now, if you I were you! WW or Lapua brass (forget Fed or other brass) CCI BR2 Primers Varget Powder Sierra 168gr SMK or 175gr SMK Work up your load to the powder charges found here www.hodgdon.com My guess is that if you were work up to the max charge you will find the sweet spot for your rifle. And, at the same time you will have some fire formed cases for your rifle! Use that Dan Newberrys OCW method and you will be proud of yourself! Now quite keyboarding and get loading! Time is wasting! If you wanted out of box match ammo, then look at BHA either 168 or 175 OTM offerings! |
|
|