|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 7, 2012, 09:55 AM | #1 |
Senior Member
Join Date: January 27, 2010
Location: Norfolk, VA
Posts: 2,905
|
Powder/charge choice versus bullet choice in .223?
In terms of accuracy, how big of a difference does the powder brand and charge weight make compared to the choice of bullet?
The reason I'm asking is that I have a bunch of the Armscor 62gr FMJBT bullets. I know that these bullets aren't in the same league as Sierra Matchking or anything like that - they're more suitable for "blasting/plinking" ammo. As such, I'm wondering if it's worthwhile to play around with working up a bunch of different loads of different types of powder in order to increase accuracy, or if I should just be satisfied with something that functions well in my AR, and save the meticulous load development for when I get some higher-quality bullets? |
September 7, 2012, 10:01 AM | #2 |
Senior Member
Join Date: August 20, 2002
Posts: 2,108
|
Personally I would simply wait until I purchased quality bullets(the 52gr match-king has never failed to be super accurate in all my 223's)I would use what you have as practice and plinking..
|
September 7, 2012, 11:40 AM | #3 |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
I too bit the bullet, that being the armscor 62 grainers. While I ONLY tried one load, they shot miserably. The rest are covered with dust in a corner, likely will stay that way. No sense wasting powder and primers on them. YMMV, they MAY shoot okay with a different powder, but I'm too busy with loads that DO shoot.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
September 7, 2012, 11:52 AM | #4 |
Senior Member
Join Date: September 22, 2011
Location: Middle America
Posts: 518
|
I concur with 'snuffy',
I have never been able to find a mix using the 62gr pulls that have given the performance that I want. But then, they do a good job for what they were intended for. I have several round loaded up for the grand kids to blast-a-way with. It makes them happy and is better than wasting my groomed loads. Enjoy, OSOK |
September 7, 2012, 03:43 PM | #5 |
Senior Member
Join Date: June 9, 2010
Location: NEPA
Posts: 909
|
Barrel twist rate and bullet weight are the two key factors.
|
September 7, 2012, 05:05 PM | #6 |
Senior Member
Join Date: September 22, 2011
Location: Middle America
Posts: 518
|
There are many variables that have to come together for the illusion of accuracy to happen.
Fortunately many have worked hard and tested and calculated so much for us in the past (and on going). We can draw upon this great wisdom and follow what the market place offers and if we stay middle of the road, so to speak, we can have something that works for us. To the subject of this thread. As 'PA-Joe' has mentioned, rifles are rifled and some twists work poorly with given ranges of bullet lengths at some velocities and others do well. For the 62gr bullets in this thread, it is not actually the weight but the length of the bullet that can get us into trouble, well the velocity does come into the mix too. I don't know the type of weapon that 'ScottRiqui' is dealing with, so I will guess an AR in one form or another. The 62gr bullets are steel core and longer than they would be if fully lead core. This adds overall length. I have found that 62gr .223/5.56 bullets in the normal spread of velocities for an AR type barrel will not stabilize well if the twist is as slow as 1 in 12. My AR-180 has a 1 in 12 twist and doesn't do well at all. I think a 1 in 9 or faster twist would be much better. I have have no problems with stability out of a 1 in 8 twist. Still doesn't have what I want but I think that is because of the bullet's them self. If your weapon's twist is 1 in 9 or faster, you should be alright. Note, I did try some 62gr loads out of a 1 in 14 twist and had to set up a box, big box, at 10 yards to catch the tumbling bullet shapes. Glad I didn't load up 500 or so and pack them away thinking they would be ok. But, each weapon is a world unto itself and anything can happen. Enjoy and be safe,. OSOK |
September 7, 2012, 05:35 PM | #7 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
You might try weighing them and segregating them in like weight groups to improve accuracy somewhat.
|
September 7, 2012, 11:48 PM | #8 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Scott,
I'd try 24 grains of Win748, WC844, WC846, or one of the new copper cleaning powders like CFE or Power Pro 1000. If it functions in your AR and groups less than 3 MOA I would call it good. Jimro
__________________
Machine guns are awesome until you have to carry one. |
September 8, 2012, 08:52 AM | #9 | |
Senior Member
Join Date: January 27, 2010
Location: Norfolk, VA
Posts: 2,905
|
Thanks for all the replies and suggestions.
Quote:
These are being used in an AR, with a 1:9 twist. They function fine with about 24.0 gr of H335, but I just ran out of H335. I was given an 8-pound jug of AA2230, so I'm working up a load with that powder now. It sounds like there's really no point trying to "gnat's-ass" the charge weight or even the powder type with these bullets, since they're just range fodder for me (and it's a 25-yard indoor range, so I'm pretty much just shooting the 25-yard reduced Navy qualification target anyway). Last edited by ScottRiqui; September 8, 2012 at 09:18 AM. |
|
September 8, 2012, 09:16 AM | #10 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Yeah, if you are shooting a 25 meter target, load it up over 24 grains of pretty much any suitable powder and call it good.
Jimro
__________________
Machine guns are awesome until you have to carry one. |
|
|