February 11, 2009, 09:02 PM | #1 |
Junior Member
Join Date: December 21, 2008
Posts: 8
|
Remington 700 Trigger
The trigger pull on my remington is really bad. the worst part is the 3 screws to make adj I only one can free onr of them. The other two are frozen belive me I have tried almost every thing soaking in Pentrating oil to no luck. I will take any suggestion.
How hard is is to replace the hole trigger assembly and what is a good trigger to use. I do want to keep the safety on the rifle Does any one know of a good site for info thanks Butch |
February 11, 2009, 09:09 PM | #2 |
Member
Join Date: May 23, 2008
Posts: 29
|
remington puts a clear sealant on the screws, you can use the tip of a soldering iron to heat them up and loosen the screws. the easiest thing to do is replace the trigger assembly with a timney trigger. it isnt too complicated. and it is safer , adjusting the factory screws isnt reccommended for the inexperienced.
|
February 11, 2009, 09:18 PM | #3 |
Junior Member
Join Date: December 21, 2008
Posts: 8
|
Thanks
I did think about heat but using a solding iron is a good idea I will give it a try thanks Butch
|
February 11, 2009, 09:41 PM | #4 |
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,553
|
Take a look at Rifle Basix triggers as well if you can't get it to work. I have two RB triggers and they're great. Takes 15 minutes to install and 10 minutes on the phone to adjust..
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times) "That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell |
February 11, 2009, 09:58 PM | #5 |
Junior Member
Join Date: December 21, 2008
Posts: 8
|
Thanks inspector I willlook into that trigger Butch
|
February 12, 2009, 11:00 AM | #6 |
Senior Member
Join Date: December 2, 2008
Posts: 126
|
+1 on the rifle Basix trigger. I recently tried to adjust my stock trigger and it worked great at first...the gun stopped firing 26 shots latter. I did tons of research and got the rifle basix trigger from midwya (it was on sale, still might be). I'm installing it this weekend, I'll let you know how it goes.
|
February 12, 2009, 11:07 AM | #7 | |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Quote:
I think Remington must be using Loctite on the engagement (rear) screw in some newer 700s. I've adjusted dozens of 700 triggers, but was unable to adjust the engagment screw on a new 700 recently. |
|
February 12, 2009, 08:59 PM | #8 |
Senior Member
Join Date: December 2, 2008
Posts: 126
|
I believe I replyed back in the other thread but have not had a chance to test back and report. My stock trigger had no creep or overtravel, it was just super heavy. I backed out the pull screw one half turn and had a perfect trigger (while it lasted). Backed the screw back in...still no fire. Did the complete adjustment per another posters instructions and will be field testing tomorrow...wish me luck!
|
February 13, 2009, 06:00 PM | #9 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
I'm sure an aftermarket will work fine but I have had good luck adjusting the stock trigger on the ones I have played with. Yes, Remington now uses some version of locktite but I have broken it loose even without heat, although heat would surely help. You can google up the instructions, but please use care and bump test the heck out of it and don't trust the trigger or the safety for a while (even with an aftermarket).
|
February 14, 2009, 10:31 AM | #10 | |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Quote:
|
|
Thread Tools | Search this Thread |
|
|