The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools Search this Thread
Old November 18, 2012, 08:04 PM   #51
cataway
Junior Member
 
Join Date: December 10, 2011
Posts: 4
there was a time when i thought the 708 was going to die out ,for a time i thought it had.
what about the AR10 in 708 ? as far as i know there was/is one but its not very popular. did it not work for some reason ?
cataway is offline  
Old November 18, 2012, 08:15 PM   #52
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 2,697
I have nothing against the 7-08, I'm sure it's a good cartridge.
I just don't see any benifit in it seeing that I already own a fine rifle in a better caliber, the 280.

If I want less recoiling rifles I have two 243s and a 250 Savage, all three of them are very mild in the recoil department.
All three of them are also excellent choices for Deer or Antelope.

Now if I need to go to longer range and bigger game my 280, 30-06 or custom 8mm gets the nod.

If we want to play with numbers, here's some factory numbers.

Both are factory loads shooting 150 grain bullets which I feel would be the minimum I would use on Elk or longer range shooting.

7-08
MV 2650 100yds/2430 200yds/2235 300yds/2043 400/yds/1859 500/tds1689

ME 2339 100yds/1979 200yds/1664 300yds/1390 400yds/1151 500yds/950

280
MV 2890 100yds/2687 200yds/2494 300yds/2308 400yds/2130 500yds/1960

ME 2782 100yds/2405 200/yds2071 300yds/1774 400yds/1511 500yds/1279

I heard or read it suggested many times that the minimum ME for deer is 1200and the minimum for Elk is 1500.
I can't say that I buy into all that but rest assured if I was going Elk hunting or planing on doing some long range shooting on Deer and Elk I would be packing a 280 over a 7-08.

Best Regards
Bob Hunter
www.huntercustoms.com
Hunter Customs is offline  
Old November 18, 2012, 09:10 PM   #53
r0sewood
Junior Member
 
Join Date: November 9, 2012
Posts: 11
quote "I just re-barreled my Savage 7-08 to handle the 162 AMax...
If your twist is fast enough, it has an amazing BC of .625. I've read that some use it for hunting, but Hornady doesn't recommend it for that application. "

Use the 162 SSts, they have the same BC as the Amax and are designed for hunting. I bought some for my 7mag, but it groups better with the 154 SSTs. Decided to use the 154s in the 7mm08 to reduce inventory. I may try the 162s since I have some to use anyway and see what I can get.
r0sewood is offline  
Old November 19, 2012, 04:51 AM   #54
old roper
Senior Member
 
Join Date: June 11, 2007
Posts: 2,155
Back when Rem first came out with matte finish varmint rifle with H&S stocks back in the 80's I purchased one in 70-08 and 308. I'd plan to use both rifles shooting factory class match.

Only factory ammo I could buy for 7-08 was Rem with 140gr CL bullet which I chronograph @ 2844fps rifle had 24" long barrel. I worked up load using 168gr Sierra with 40gr/IMR-4064 @ 2563fps and I was looking at that load in Hodgdon 2012 manual max is now 39.8gr/IMR-4064 @2597fps. I'd also worked up load using Rem 140gr CL bullet 48gr/760 @ 2841fps and see that load is couple grains over max now @ 2791fps.

Here in Co don't see lot of 7-08.
__________________
Semper Fi
Vietnam 1965
VFW Life member
NRA Life Member
old roper is offline  
Old November 19, 2012, 07:23 PM   #55
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
Only thing I "kill" is steel plates, so energy at 600-1000 is irrelevant to me.
No question the long action .280 can burn more powder behind the bullet and be a better choice for longer range hunting if the energy is needed.

For some reason these days, short actions are preferred. Can't quite figure it out, but the market seems to prefer wildcat short magnums despite the decreased barrel life, over a long action.
tobnpr is offline  
Old November 19, 2012, 09:03 PM   #56
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
Quote:
Originally Posted by tobnpr
For some reason these days, short actions are preferred. Can't quite figure it out, but the market seems to prefer wildcat short magnums despite the decreased barrel life, over a long action.
I would guess its because a good many rifle owners don't even know there is such a thing as barrel life and, those who do, very often realize that even rifles chambered in "barrel burning" cartridges will typically outlast several generations of their kin.

Plus, many times when a barrel is "shot out", we're talking about bench rest ideals. Some people buy "shot out" barrels and are more than happy with them, not needing 1/4 MOA accuracy.

I've personally never worn out a barrel, doubt I ever will, and I totally disregard "barrel life" as an issue.
Brian Pfleuger is offline  
Old November 22, 2012, 11:51 AM   #57
RMcL
Senior Member
 
Join Date: May 7, 2006
Location: Alabama
Posts: 273
If you depend on factory loaded ammo, the 7-08 is a popular, widely distributed cartridge. Indeed, you will often see it in the "sale flyers" these days along with the .243, .308, 30-06, .270 Win. and 30-30.
RMcL is offline  
Old November 28, 2012, 04:01 AM   #58
wet
Member
 
Join Date: October 2, 2011
Location: ID.
Posts: 89
In the early 60's I had a 270, I loved it but with one execption, factory ammo only came in two bullet flavors. A gunsmith friend of the family said he could boar it out to hold a 7mm bullet and give me all kinds of options to reload.
15 years ago I bought another 280 as the barrel got bent on the first one when a horse rolled on it. I have been shooting a 280 for most of my life and prefer it over anything.
JMHO
wet is offline  
Old December 3, 2012, 09:39 AM   #59
chucknbach
Senior Member
 
Join Date: July 10, 2011
Location: Gillette, WY
Posts: 135
Quote:
Fourteen years ago it was time to set my son up for deer hunting,I chose the 7mm-08 Rem.
My decision and reasons for the 7mm-08 Rem for a nine year old
1) Less recoil,I also handload so the first practice batches and first year of hunting ammo were reduced loads which helped a lot for a young shooter.
2) The short action rifles are a bit smaller for younger and smaller hunters
3) I'm also a 7mm(.284) fan when it comes to deer/elk hunting cartridges.
I think this is why it's more popular. Dad's are choosing it for their kids and/or wives as well. After having success for a number of years when young, they are less likely to fall into I need more trap when older. We all carry an affinity for they cartridge we used when younger if we were successful.

I still carry a .243 for deer and lopes. I choose a 708 for my son because elk was in the mix. .280 vs 708 is like having a monster truck to go to the store to pick up milk when a regular non lifted truck will get you there more comfortably.
chucknbach is offline  
Old December 10, 2012, 06:49 AM   #60
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 8,274
You can show up to the same place and get the job done with either one.Then it becomes shades of grey,and preferences.You can go elk hunting with either,and you have to place your shot with both.

Study your load manuals.My Nosler compares 7-08,280,and 7mm mag,all with 26 in bbls.In a way,that is useful for comparison,but then,who carries a 26 in bbl 7-08?And what happens to a 7 mag if you shorten the bbl to 22 in?

I think for mostly deer at reasonable hunting ranges,the 7-08 is a great choice,particularly with the 139 to 150 gr loads(and,the non-lead bullers,a touch lighter).IMO,as you start stuffing the 160 gr + bullets to fit in a 2.800 mag box,you get to diminishing returns with the 7-08.Still,with a 22 in bbl you would likely get 2600 to 2650 easily.Bullets are designed to expand and perform within velocity ranges,often above 2000 or so.The 7-08 will give the 2000 fps at 300 yds,no problem with a 160 gr bullet.

A typical .280 might have a 24 in bbl and can longer seat 160 to 175 gr bullets.Velocities will be up near 150 fps faster,which translates to nearly 100 yds farther range to still deliver the 2000 fps .

What is interesting is how near to 7mm Rem Mag the .280 comes,generally within 70 or 80 fps.

Now,in the Nosler book,there will seem to be one powder that exceeds the rest,like Re-19 in the 7-08.QWhile I do not discount Re-19 in the 7-08,lets not forget that 26 in bbl.I looked at the cluster of second fastest powders.I set aside the H-870 load in the 7mmRem,too.

Study the numbers,they tell you some.,But,then look at the whole package,and what you are trying to do.If I'm carrying a 7 1/2 lb rifle with a 24 in bbl and I likely will hunt elk,I'd go .280,and shoot 160 gr + bullets.

I could still do all that with a 7-08,just a little less velocity.But if I want a 6 lb,22 in bbl handy little woods gun,the 7-08 is obvious.

Myself,I would lean to the 280 over the 7 Rem Mag more likely,but,once again,its pure preference and shades of grey.
HiBC is offline  
Old December 10, 2012, 10:26 AM   #61
boattale
Senior Member
 
Join Date: November 28, 2012
Posts: 118
I think it's more the .280 is competing against the .270 and Jack O'Connor. There's really very little functional difference between .270 and .280, especially in factory loading. And the 7mm-08 is competing against .243 and gives you a lot of options that the admittedly wonderful .243 doesn't. I look at 7mm-08 as a .243 on steroids. And that's why its so popular.
boattale is offline  
Old December 10, 2012, 11:35 AM   #62
FiveInADime
Senior Member
 
Join Date: January 25, 2012
Posts: 607
Quote:
Originally Posted by boattale
I think it's more the .280 is competing against the .270 and Jack O'Connor. There's really very little functional difference between .270 and .280, especially in factory loading. And the 7mm-08 is competing against .243 and gives you a lot of options that the admittedly wonderful .243 doesn't. I look at 7mm-08 as a .243 on steroids. And that's why its so popular.
Good call. I took a picture of a .243 round next to a 7mm-08 and it's a neat comparison. That 1mm of width makes the 7mm-08 look so much tougher than the .243 That said, I have them both and I am really learning to love the 7mm-08Rem. So much so, in fact, that I am questioning whether or not I need my 7mm Rem. Mag any more. It's soooo much more expensive to shoot and in practical application (deer/antelope hunting) not too much lost with the 7mm-08.
FiveInADime is offline  
Old December 10, 2012, 01:04 PM   #63
Saltydog235
Senior Member
 
Join Date: October 20, 2010
Location: Pawleys Island
Posts: 1,563
Killed a doe stone dead Saturday AM at 322 yards with my 7mm08 never took a step after the shot. I don't see where a .280 would have done any better.
Saltydog235 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07460 seconds with 8 queries