loading 380

c.j.sikes · July 20, 2012, 12:48 PM

i have a lyman 1200 dps powder dispenser and loading 3.2 gr hp 38 the cases are so small that my reg. funnel , when casses are sitting in loading block, doesent go down for enough to keep from spilling powder when filling cases. any ideas? thanks cjs

slugoo · July 20, 2012, 04:51 PM

I use a 2x4 and a paddle bit 3/4 inch and drill down 3/8 inch doing 20 or 30 holes in the 2x4 and use a spare funnel i have filed off 1/8 inch and have no problems with either 380 or 9mm. The funnel will fit into the 3/4 inch hole to keep it in place. Charlie

JohnMoses · July 20, 2012, 06:06 PM

The MTW universal load block is one of my most often used tools. You can almost always find a hole that allows the funnel to work.

c.j.sikes · July 22, 2012, 09:04 AM

thsnks fellows, some good ideas cjws

July 20, 2012, 12:48 PM	#1
c.j.sikes Senior Member Join Date: March 21, 2006 Location: marlow okla Posts: 227	loading 380 i have a lyman 1200 dps powder dispenser and loading 3.2 gr hp 38 the cases are so small that my reg. funnel , when casses are sitting in loading block, doesent go down for enough to keep from spilling powder when filling cases. any ideas? thanks cjs

July 22, 2012, 09:04 AM	#4
c.j.sikes Senior Member Join Date: March 21, 2006 Location: marlow okla Posts: 227	loading block thsnks fellows, some good ideas cjws

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 20, 2012, 04:51 PM	#2
slugoo Member Join Date: May 3, 2011 Location: Littleton Colorado Posts: 78	I use a 2x4 and a paddle bit 3/4 inch and drill down 3/8 inch doing 20 or 30 holes in the 2x4 and use a spare funnel i have filed off 1/8 inch and have no problems with either 380 or 9mm. The funnel will fit into the 3/4 inch hole to keep it in place. Charlie

July 20, 2012, 06:06 PM	#3
JohnMoses Senior Member Join Date: April 11, 2008 Posts: 197	The MTW universal load block is one of my most often used tools. You can almost always find a hole that allows the funnel to work.