October 15, 2006, 12:48 AM | #1 |
Senior Member
Join Date: May 1, 2005
Posts: 366
|
Want to get started.
Well, I have decided that I need to learn how to hand load. I am tired of paying 20+ bucks a box for ammo and having to take what they have in .44 special, which is usually some sort of cowboy load, which my gun does not like and spits all over the place.
I tie my own flies for flyfishing and think that it may be analogous to hand loading for shooting. (but ultimately much quieter ) So where and how do I start learning? I know next to nothing about this art but I am looking forward to it. Thanks -D |
October 15, 2006, 02:08 AM | #2 |
Senior Member
Join Date: April 19, 2005
Location: Nevada
Posts: 1,146
|
Handloads.com will tell you pretty much everything and they have detailed forums aswell. You CAN learn as you go, so just triple check load data at first and jump right in. Straight walled revolver rounds are easiest and a great place to start. Good luck
|
October 15, 2006, 02:46 AM | #3 |
Senior Member
Join Date: May 1, 2005
Posts: 366
|
Thanks, I'll check them out.
|
October 15, 2006, 06:12 AM | #4 |
Senior Member
Join Date: February 20, 2006
Location: north Ga
Posts: 208
|
I'm also new to reloading. I bought everything used off of ebay. You have to be patient, and check what the equipment costs new at places like Midway.com. I've seen people pay prices higher than new on ebay for used!
That said, I've successfully loaded 200 rounds of .357 mag, and I find myself looking forward more to the bullet-making than the bullet-shooting! It is, so far, an excellent way to save money, and I find it interesting and relaxing. As far as saving money, I figured out that all the equipment I bought will be paid for in less than one year, based on the typical amount of bullets I shoot a year. Good luck, and visit this forum often... I do, and I've learned a lot here!
__________________
Carl S&WCA | SAF | GOA Life | NRA Benefactor |
October 15, 2006, 06:42 AM | #5 |
Senior Member
Join Date: April 3, 2005
Location: Seattle
Posts: 827
|
Read The ABC's of Reloading.
Twice.
__________________
"Huh?" --Jammer Six, 1998 |
October 15, 2006, 02:18 PM | #7 |
Senior Member
Join Date: May 1, 2005
Posts: 366
|
LOL that is a shameless plug
I have The ABC's of reloading on its way from amazon. |
October 16, 2006, 10:29 AM | #8 |
Senior Member
Join Date: August 8, 2004
Location: Alabama
Posts: 301
|
Equipment for getting started
Some USED equipment can be used for reloading. There's lots of used presses floating around. Single stage is popular. If you're looking at Lee Equip., you might consider their turret press that sells for less than $100. Buying some equipment used is a big help if you quickly want to reach the break-even point on cost. I was collecting and reselling used equip. (for a profit) and was close to the break-even point on my very first loads.
Enjoy, be safe, and go for it! |
October 17, 2006, 11:41 AM | #9 | |
Member
Join Date: October 10, 2006
Location: A nation in distress
Posts: 79
|
Quote:
|
|
October 17, 2006, 07:24 PM | #10 |
Senior Member
Join Date: April 3, 2005
Location: Seattle
Posts: 827
|
Yes it is.
I went back and re-read it after I had loaded my first thousand rounds, and got a lot more out of it.
__________________
"Huh?" --Jammer Six, 1998 |
October 18, 2006, 02:18 AM | #11 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Read the ABC's book then look into an RCBS Beginner's kit. Gives you everything you need less dies(think carbide sizer die only) and shell holder. Buying bits and pieces is more expensive in the long run. Talk to the guys you shoot with and you're local gun shop too. Ask the shop about the Beginner's kit price too. The ABC's book is great, but it doesn't hurt to see it done either. And keep in mind that we're here for you as well.
Forget E-bay. They're anti-firearm and they get a piece of every sale. |
October 18, 2006, 03:38 AM | #12 |
Senior Member
Join Date: May 1, 2005
Posts: 366
|
Thanks for the info. I think I will get the ABC's and read it before I start buying stuff. I'm sure that I will have all sorts of questions for you all of you once I start reading.
Thanks again -D |
October 18, 2006, 11:45 PM | #13 |
Senior Member
Join Date: January 22, 2006
Location: BETWEEN TN & KY
Posts: 1,758
|
I just started in August. I purchased Lee's ABC's of reloading and a Lee Anniversary Kit. I got dies (Lee), powder, primers and bullets, used fired factory Federal brass. I started slow and easy but have shifted up a couple of notches.
The main reason I started was similar to yours, 32 H&R magnum and basically only Federal loaded decent ammo for it. Ammo was expensive in that I was paying from $10 to $11 for SWC and $12 to $13 for JHP, this is for 20 rounds. I now reload some hot rounds for my Ruger SP-101 w/4" barrel and 1894CB Marlin rifle and they seem to like it that way. It has become a hobby in its own right and I find I am having much fun "saving" money. |
October 19, 2006, 02:32 AM | #14 |
Senior Member
Join Date: May 1, 2005
Posts: 366
|
DWARREN, I saw your post on the .32 mag thread in the revo. section.
Seems almost mandatory to reload your own if you have a revolver and a rifle in .32 mag Thats pretty cool. I bet you can make up some pretty sweet loads that are way better than factory ammo. |
Thread Tools | Search this Thread |
|
|