|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 15, 2013, 03:04 AM | #1 |
Senior Member
Join Date: February 27, 2009
Posts: 406
|
Nickel plate holster damage?
Gunners:
Can the nickel plating on a handgun be damaged by daily holstering/reholstering any more than blueing? Rmocarsky |
May 15, 2013, 04:06 AM | #2 |
Senior Member
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 3,318
|
Related question: if you have a blued gun cleaned with Hoppe's and use it in the same holster as a nickel gun, can the Hoppe's that gets into the holster take off the nickel finish?
|
May 15, 2013, 12:32 PM | #3 |
Senior Member
Join Date: April 7, 2006
Posts: 10,985
|
The answer to both questions is "no."
Nickel plating is much more durable than bluing, but it will still wear-just not as quickly. Any solvent used to clean a gun should be thoroughly removed before putting the gun in a holster. Regardless, there should be no problem. |
May 15, 2013, 01:24 PM | #4 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Just like the quality and durability of a "blued" finish varies from mfg to mfg...and has varied over time / the same is true of "Nickel" finishes in my opinion....
But I find ( on my older S&W revolvers as an example ) that I have way less holster wear on my Nickel guns than I do on any of my blued guns --- S&W model 19's, 27's and 29's where I have both blued and nickel versions of the same gun / and I use them in and out of the same holster ( Kramer horsehide leather) - and thru the years, I've probably shot the nickel versions a lot more than the blued versions / so way more in and out of the holster on the Nickel guns. |
May 15, 2013, 01:58 PM | #5 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
There is only one proven way to prevent finish wear on a firearm. Leave it in the box and never take it out. That is why very rare and unique firearms are kept in display cases. Not being snarky, there is just no way to prevent a firearms finish from wearing if it is used.
__________________
Ron James |
May 15, 2013, 01:59 PM | #6 |
Senior Member
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
|
The modern formulation of Hoppe's will not strip nickel unless you absolutely soak the gun in the stuff and then wait a LONG time.
IMHO you should not worry about trace amount of Hoppe's that may have been absorbed in a holster.
__________________
"Smokey, this is not 'Nam. This is bowling. There are rules... MARK IT ZERO!!" - Walter Sobchak |
May 15, 2013, 04:28 PM | #7 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
And don't STORE your gun, blue or nickel, in a leather holster.
|
May 15, 2013, 08:42 PM | #8 |
Senior Member
Join Date: January 16, 2013
Posts: 211
|
Re: Nickel plate holster damage?
Oh ya? That's good to know.
My nickle gun has a few polished shiney areas from many holsterings and drawings from a plastic fobus holster. No damage yet tho. |
May 16, 2013, 07:09 AM | #9 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
Old-style nickel plating, which was adhered to a layer of copper plate, was a lot more suceptible to this, especially if the solvent in question could remove copper fouling.
Modern electroless nickel plating dispenses with the need for a copper layer, so it is a LOT more durable from that standpoint.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
May 16, 2013, 07:36 AM | #10 |
Senior Member
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 3,318
|
I know a guy who stripped the nickel off his benelli auto shotgun action with hoppe's. I also saw a ruined enickel python that had some hoppe's slopped on it at one time.
|
May 16, 2013, 01:57 PM | #11 |
Senior Member
Join Date: April 7, 2006
Posts: 10,985
|
Nickel is difficult to strip with a real, dedicated nickel stripper. I can't see Hoppe's doing it. Most manufacturers did not use a copper undercoat on their nickeled pistols. It is not necessary. A copper underplate is usually done in "bumper chrome" plating shops.
|
May 16, 2013, 03:42 PM | #12 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
As I said, Bill, old style, as in 100 or so years ago.
It was apparently done that way because it was faster and easier to plate the steel with copper, and then the copper with nickel. As the technology progressed, copper underplating was slowly dropped. That said, solvents, including Hoppes, have been known to attack nickel plating for decades. It is not, however, a quick process, nor will it strip an entire gun quickly and surely.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
May 17, 2013, 01:09 AM | #13 |
Member
Join Date: May 11, 2013
Posts: 99
|
I carry a nickel plated LC9 as a back up for the past year. It still looks OK, but I'm sure eventually it will wear.
|
|
|