March 21, 2013, 11:42 AM | #1 |
Member
Join Date: October 6, 2011
Location: Florida Panhandle
Posts: 84
|
Would you reload these
I picked up some .243 brass at the flea market that was pretty tarnished but was supposed to be sized and primed. Some primers were Federal some CCI. The problem is that some of the brass are indented between the shoulder and the neck. Some of the dents are pretty deep. The dents do not stop the brass from going into the chamber.
My question is - would you reload them and count on fire-forming to fix the case dent or throw them away? Brass is hard to find and I need all I can get, however, I don't want any problems and I suppose I should just toss them. |
March 21, 2013, 11:52 AM | #2 |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
In most instances of dents, they are of no concern...pictures would have helped.
Lube dents in strait-walled rifle cases (45-70, 444 Marlin, etc.), are common and somewhat difficult to avoid with oil (wet), lubes. Over application of lube on bottle-neck cases are possible via over-lubing them also. In that situation they are harmless and disappear on firing. |
March 21, 2013, 12:50 PM | #3 |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
Unless it is some kind of monster dent, no issue for me. I sized a bunch of brass once and somehow managed to get a grain of walnut tumbling media in my sizing die (obviously from one of the cases). It left a very noticeable dent on the shoulder of the brass. All brass fired without a hiccup, and I couldn't tell you which brass it was anymore.
Brass does not have to be perfect to function perfectly. |
March 21, 2013, 01:40 PM | #4 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Probably the worst that would happen is a loss of accuracy due to the irregular case shape in the chamber.
And self correcting when fired.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
March 21, 2013, 02:32 PM | #5 |
Member
Join Date: October 6, 2011
Location: Florida Panhandle
Posts: 84
|
Thanks everybody. As hard as brass is to find now days I hated to throw it away.
|
|
|