|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 13, 2009, 05:34 PM | #1 |
Junior Member
Join Date: August 3, 2009
Location: NC
Posts: 3
|
Colt Mustang .380 ejector problems
I've been hit by the Colt Mustang gotcha. Loaned the gun out to a friend for a while, got it back in non firing condition. Disassembled it and found the ejector (Part 4 on exploded diagram, part#55551) had slipped down into the magazine area. Found the fix in the manual by pressing the spring and it fell right back into place. Didn't bother firing it right then, but discovered some time later the weapon will not fire a cartridge. Not even a dent on the primer. I'm thinking that either me or my friend damaged the ejector when reassembling the weapon. It looks like the ejector has to raise the firing pin block when the trigger is pulled to allow the firing pin to contact the primer. This is not happening with my Colt Mustang. I wonder if the weapon is so old that the ejector is no longer available. I've not found one in stock on the net yet.
|
August 13, 2009, 06:17 PM | #2 |
Senior Member
Join Date: May 4, 2001
Posts: 7,477
|
Probably your best bet is to talk to directly to Colt.
Possibly they still repair these. |
August 13, 2009, 07:58 PM | #3 |
Member
Join Date: August 5, 2009
Posts: 16
|
Nothing may be wrong.....
There is a trick to reassbling those little Colts......I can't tell you what it is because it has been so long I don't remember.....But I took one down for a good cleaning once upon a time and when I reassembled it it would not fire.
Took it to a friend who was a gunsmith and he had it fixed in no time....let someone who is familar with those guns have look at it.... |
August 15, 2009, 11:43 AM | #4 |
Senior Member
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
|
If you can't get it to work, Colt will still service it for free.
|
Thread Tools | Search this Thread |
|
|