The Firing Line Forums

Go Back   The Firing Line Forums > The Conference Center > General Discussion Forum

Reply
 
Thread Tools Search this Thread
Old November 27, 2008, 10:53 PM   #1
j-framer
Senior Member
 
Join Date: July 5, 2006
Posts: 375
What is the lowest serial numbered gun you have ever owned?

Hi folks,

I thought there must have been a thread like this before, but couldn't dig one up in 10 minutes of searching.

I'm interested to know which among you have owned firearms that have/had what you consider to be a remarkably low serial number relative to the total number produced. I'd be interested in hearing what the guns were, the approximate serial number, and any other interesting facts or anecdotes you may have to offer about the gun's history.

Some of you may say "Who cares?", but I have a certain fascination with very low numbers on a gun, a fascination extends particularly to older guns with some recognized collector appeal.

Even if you didn't own the gun, but simply saw it for sale or auction, or know someone who has such a piece, please share it with us.
j-framer is offline  
Old November 27, 2008, 11:05 PM   #2
Drachenstein
Senior Member
 
Join Date: November 1, 2008
Location: Elizabethtown, KY
Posts: 224
S&W M&P

C97

First two digit I've ever seen
Drachenstein is offline  
Old November 28, 2008, 12:39 AM   #3
vytoland
Senior Member
 
Join Date: August 23, 2008
Location: Illinois
Posts: 614
hootzy bot wah 3 shoot s/n -24
vytoland is offline  
Old November 28, 2008, 12:49 AM   #4
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
60X, on a rifle made in 1871.
PTK is offline  
Old November 28, 2008, 12:51 AM   #5
farnorthdan
Senior Member
 
Join Date: December 3, 2007
Posts: 371
SR9

My Ruger SR9 is a pre-production model, lets just say its less than 500.


DS
__________________
Believe NONE of what you hear; HALF of what you see and ALL you believe

Accuracy is king,penatration is queen but why not jack'em in the process if you can.
farnorthdan is offline  
Old November 28, 2008, 12:54 AM   #6
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,333
I have a couple that have "N/A" for the serial number on the 4473. Do those count?
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Old November 28, 2008, 09:34 AM   #7
clown714
Senior Member
 
Join Date: October 13, 2001
Location: ga
Posts: 395
I have a daewoo K-200,kimber import.

serial # is in the teens.

clown
clown714 is offline  
Old November 28, 2008, 10:11 AM   #8
elkman06
Senior Member
 
Join Date: March 14, 2006
Location: Wyoming
Posts: 885
Ruger standard automatic pistol..#538x
elkman06
__________________
"The right of the citizens to bear arms in the defense of themselves and of the state shall not be denied." Wyoming Constitution Article 1, Sec24

"Better to be tried by 12 than carried by 6"
elkman06 is offline  
Old November 28, 2008, 10:31 AM   #9
j-framer
Senior Member
 
Join Date: July 5, 2006
Posts: 375
Interesting that most of the guns so far are relatively new models. This one isn't, though:

Quote:
60X, on a rifle made in 1871.
PTK, would you mind sharing what make and model of rifle that is?

Part of what inspired this thread is an old, long-closed auction that I recently view online for a Colt 1908 .25, whose serial number was 29xx. Not terribly low, but by far the lowest I have encountered yet (for that particular model).

I wonder exactly how desirable low serial number guns are to collectors. How much of a difference does it make in the gun's value?

Naturally, it would depend in large part on how collectible the model is to begin with and its condition as well, but I'd like to find out how much of a premium people would pay for such guns.

Last edited by j-framer; November 28, 2008 at 10:36 AM.
j-framer is offline  
Old November 28, 2008, 11:24 AM   #10
Waldog
Senior Member
 
Join Date: March 28, 2007
Location: SOCAL
Posts: 359
I have a Winchester Model 70, with the "cloverleaf" tang and 4 digit serial number!
__________________
I am the Christian Conservative that CNN warned you about!!

“Socialism is the philosophy of failure, the creed of ignorance and the gospel of envy.”
Winston Churchill
Waldog is offline  
Old November 28, 2008, 11:51 AM   #11
hockea
Member
 
Join Date: November 7, 2004
Location: Las Vegas
Posts: 37
Remington Rolling Block in 7x57, #139
hockea is offline  
Old November 28, 2008, 11:55 AM   #12
brickeyee
Senior Member
 
Join Date: December 29, 2004
Posts: 3,351
XP100 in .221 Fireball under 1000.

1866 trapdoor in .50-70 that is "NSN".
brickeyee is offline  
Old November 28, 2008, 12:25 PM   #13
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,755
I guess mine doesn't really qualify as a low serial number... I have my Grandfather's pre-model 10 Smith & Wesson. Roy Jinks calls it officially the "Smith & Wesson Military and Police model of 1905 Fourth Change" and it's date of manufacture was 1921 and the serial number is 357xxx.

Not a low number, but we are talking about a revolver that S&W has made for a long, long, LONG time, and they made a lot of them. Compared to many other model 10s, you'd have to call this one a low number!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old November 28, 2008, 12:30 PM   #14
PSP
Senior Member
 
Join Date: June 2, 2006
Location: Bowling Green Virginia
Posts: 4,487
Seecamp LWS32, serial NO. 6XX, (1986)
PSP is offline  
Old November 28, 2008, 12:35 PM   #15
Scott Free
Member
 
Join Date: September 24, 2008
Posts: 41
I had a Glock 23 with a SN under 1000. My Kel-Tec P11 is under 500.
Scott Free is offline  
Old November 28, 2008, 02:45 PM   #16
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
j-framer

It's a Dutch Beaumont-Vitali rifle. I still shoot it, too!
PTK is offline  
Old November 28, 2008, 03:19 PM   #17
UniversalFrost
Senior Member
 
Join Date: February 20, 2006
Location: Ohio
Posts: 2,300
built an ar from an 80% finished lower (I had access to the equipment at that time to finish it).

since I was the one that finished the lower. I marked it 000

oh and I also own several savage, stevens and some others that don't have a serial number (came from the factory that way many many years ago).
__________________
Lifetime member VFW and NRA

"Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green

UniversalFrost is offline  
Old November 28, 2008, 03:25 PM   #18
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
I've got a S&W .38-.44 Outdoorsman (or HD?) 6" Target Model with SN 12X. It's currently out gettin a new backwards twist ejector rod built.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I suspect a thing or two... because I've seen a thing or two.
10-96 is offline  
Old November 28, 2008, 03:26 PM   #19
BurkGlocker
Senior Member
 
Join Date: May 18, 2008
Location: Sheppard AFB, TX
Posts: 568
Dad has a blackpowder derringer (which, technically will be mine soon), there were only 20 made, S/N is 7.

Have a S&W Regulation Police and the s/n is in the 700's.
BurkGlocker is offline  
Old November 28, 2008, 06:49 PM   #20
rogertc1
Junior member
 
Join Date: December 17, 2004
Location: Maquoketa
Posts: 1,335
WELL MY KIMBER PASS Martini Henry has #7 all over it..
Accually my Downsizer in SN 1XX
and my Semmerling .45 SN 3XX
rogertc1 is offline  
Old November 28, 2008, 07:36 PM   #21
KellyTTE
Senior Member
 
Join Date: November 28, 2007
Location: Denver CO
Posts: 123
00014 on a Norinco M14s.
__________________
Kelly H
Cool no bs gear & gun reviews
http://www.ttellc.net - [email protected]
KellyTTE is offline  
Old November 28, 2008, 10:26 PM   #22
4thPointofContact
Junior member
 
Join Date: September 22, 2007
Posts: 197
.....1508 on a shotgun (out of around 5,000 made in total)
915 on a DPMS lower receiver
4thPointofContact is offline  
Old November 28, 2008, 11:18 PM   #23
j-framer
Senior Member
 
Join Date: July 5, 2006
Posts: 375
I'm liking this thread, guys! Thanks all for contributing, and keep going, by all means!
j-framer is offline  
Old November 28, 2008, 11:57 PM   #24
DonR101395
Senior Member
 
Join Date: October 30, 2005
Location: NWFL
Posts: 3,031
I've got two Cav Arms forged lowers serial numbers 327 and 328. 327 is an SBR and I haven't decided if 328 will be an SBR or SPR.
DonR101395 is offline  
Old November 29, 2008, 03:35 AM   #25
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
SN's are kind of an interest of mine also. My neatest one is a Star Super B with 2 serial numbers. One of the guys at Star Bonifacio Echeverria, S.A. web sight said that according to the markings and stamps, the pistol likely started out a Model B but got switched to a Super B before being released to the Gov't Acceptance folks and then the Military.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I suspect a thing or two... because I've seen a thing or two.
10-96 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11203 seconds with 11 queries