|
March 18, 2007, 07:41 PM
|
#1 |
|
Senior Member
Join Date: June 25, 2006
Location: The Keystone State
Posts: 1,970
|
Thompson Center
I just installed a .204 Ruger barrel on my
 old style Thompson Center along with a new rifle stock and it will not fire off a round! No marks on the primer, either. Any ideas?
__________________
"Peace is that brief glorious moment in history when everybody stands around reloading". --Thomas Jefferson |
|
|
March 18, 2007, 07:50 PM
|
#2 |
|
Junior Member
Join Date: January 26, 2007
Posts: 3
|
1) (This may be too simplistic) The T/C has a moveable firing pin which enables one frame to fire both rimfire and centerfire ammunition. Most likely, your frame is set on rimfire or is in between.
2) Either way, it sounds like a firing pin problem. |
|
|
|
March 18, 2007, 08:14 PM
|
#3 |
|
Junior member
Join Date: March 31, 2006
Posts: 1,528
|
I feel foolish asking as I am sure you have, but did you look at the saftey on the hammer?
|
|
|
|
March 19, 2007, 05:38 PM
|
#4 |
|
Senior Member
Join Date: June 25, 2006
Location: The Keystone State
Posts: 1,970
|
Thompson tells me it's a head space problem.
__________________
"Peace is that brief glorious moment in history when everybody stands around reloading". --Thomas Jefferson |
|
|
 |
| Thread Tools | Search this Thread |
|
|
