August 25, 2013, 11:01 AM | #1 |
Senior Member
Join Date: February 17, 2013
Location: South Louisiana
Posts: 432
|
Hornady scale problem
My Hornady digital scale started giving what looks like "OUE2"message. Put new batteries..still the same? Did it die, or is there a setting? This happened during usage.
|
August 25, 2013, 09:39 PM | #2 |
Senior Member
Join Date: October 16, 2009
Posts: 517
|
It must be a CS-1500? QUE2- Recalibrate the scale
1. Turn on the scale 2.Give scale appx 30 sec's of warm up time to help stabilize the internal components. 3.Wait until the LCD displays 0.00 and then press and HOLD the (MODE) key for 3 sec's, the LCD will display "CAL" THEN RELEASE THE (MODE) key. 4.Press the (MODE) key again, the LCD will display "CAL" and then ''100.00''. 5.Add a 100g calibration weight, the display will show ''PASS'' and return to normal weighing mode. 6.Put away the calibration weight and press ON/OFF toturn off the scale and the calibration is finished. As the owner manual states. AF |
August 26, 2013, 07:07 AM | #3 |
Senior Member
Join Date: February 17, 2013
Location: South Louisiana
Posts: 432
|
Thanks, but this isn't a recalibration issue. I turn it on and it brings up that code then shuts off after 3 seconds. It doesn't even let me get to the 0.00. I'll call Hornady today to see what they say.
|
August 26, 2013, 09:49 AM | #4 |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
Did you set something "heavy" on it? Those scales don't have a lot of play, and if you set something a scale weighing in grains would find heavy, you can break it.
|
August 27, 2013, 08:21 PM | #5 |
Senior Member
Join Date: March 21, 2013
Location: Idaho
Posts: 5,512
|
I'm so glad I never talked myself into buying a digital scale.
I'll take my old gravity balance scale all day long.
__________________
Gun control laws benefit only criminals and politicians - but then, I repeat myself. Life Member, National Rifle Association |
August 29, 2013, 11:18 AM | #6 |
Senior Member
Join Date: February 17, 2013
Location: South Louisiana
Posts: 432
|
OK Hornady said to return it and they would send out a replacement. 2-3 weeks turnaround.
While on the subject, is there any digital scale out there that is known to be consistently accurate? Last edited by Swampman1; August 29, 2013 at 11:28 AM. |
August 29, 2013, 11:27 AM | #7 | |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
Quote:
And take so long doing it that replacing the digital and waiting 3 weeks will still put me ahead. These kinds of arguments come up all the time. Cell phones, cars, computers, scales, optics, who knows what else, anything that changes over time, I suppose. Any product can fail or be broken. Sometimes the benefits of a new technology with a potential for failure can outweigh the singular benefit of utter reliability. If I had to load (weigh powder charges) with a mechanical scale, I wouldn't do it. End of Sentence, Full Stop. I wouldn't do it. Sounds like Hornady is taking care of the issue. Too bad it's a long turn around.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
|
August 29, 2013, 10:58 PM | #8 | |
Senior Member
Join Date: March 21, 2013
Location: Idaho
Posts: 5,512
|
Quote:
When the s* hits the fan and there's no batteries or electricity, there will still be gravity.
__________________
Gun control laws benefit only criminals and politicians - but then, I repeat myself. Life Member, National Rifle Association |
|
August 30, 2013, 03:35 PM | #9 |
Senior Member
Join Date: February 17, 2013
Location: South Louisiana
Posts: 432
|
Nick CS I've never used a mechanical scale, so excuse me if I don't fully understand. If I need 19.1 grains, using a mechanical scale, how do I know if i'm not loading 18.8 or 19.4? Is it more precise than I'm thinking?
|
August 30, 2013, 07:00 PM | #10 |
Senior Member
Join Date: June 18, 2013
Posts: 263
|
Hornady scale problem
You can get them to 1/10 of a grain or less if you want to put the pointer between the lines. Personally I find it easier and more accurate to use the balance beam than using the electric scale but I can't knock anybody for what works for them. There are pros and cons to just about everything.
|
August 30, 2013, 07:24 PM | #11 |
Senior Member
Join Date: December 14, 2012
Posts: 331
|
I'd wait for the replacement. That scale works for lots of folks. You just got a loser scale. You see them on the you tube being used by folks that know what they are going.
|
August 30, 2013, 07:58 PM | #12 |
Senior Member
Join Date: March 21, 2013
Location: Idaho
Posts: 5,512
|
Swampman1: They are (mine is) accurate to the 1/10th grain, or even 1/20th if you wanted to split the difference between the two digits in the scale - it is that accurate. At least mine is (RCBS, circa 1984). It's a damn good unit. I treat it as the delicate instrument that it is. It's tucked away in under my loading bench in its own box until I need it. I set it up, use it, and return it.
It's very accurate and very consistent. Does the job quite well. Everybody has their own preferences and we're still free enough to choose what type of scale we want to use - for now. For me, I'll take the ol' gravity/balance type. It may take a little more patience than a digital, but the hallmark of a good loader is patience anyway. I also trust it more than a digital scale. I've seen too many weird things happen with digital instruments (as someone in the culinary world: I'll take an analog food thermometer over a digital all day long - and for the same reasons).
__________________
Gun control laws benefit only criminals and politicians - but then, I repeat myself. Life Member, National Rifle Association |
Thread Tools | Search this Thread |
|
|