|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
October 2, 2012, 07:30 AM | #1 |
Senior Member
Join Date: September 30, 2012
Location: tennessee
Posts: 119
|
thinking of a box mag on my rem 700 short action
looking for advise on using badger ordnance, h-s precision, or wyatts box mag and trigger guard sets. any preferences? looking to have more capacity for vermin. and finally is the cost worth the gain?
|
October 2, 2012, 11:03 AM | #2 |
Senior Member
Join Date: September 30, 2012
Location: tennessee
Posts: 119
|
seriously, not one reply out of 29 viewed. did i somehow offend you guys. just trying to make conversation. im not new to the shooting world just new here, way to make a guy feel welcome!lol
|
October 2, 2012, 11:30 AM | #3 |
Senior Member
Join Date: November 11, 2011
Location: Chicago area
Posts: 277
|
Blue, maybe none of the 29 had any experience with after market mags for Rem 700s.
|
October 2, 2012, 11:33 AM | #4 |
Senior Member
Join Date: July 20, 2008
Location: Mississippi
Posts: 2,654
|
Firstly your getting too worked up, you haven't offended anyone. I've had threads with 300+ views and no reply. You just posted this morning, people are busy, give it some time.
As to your question I've heard iffy things on HS. Badger, APA, surgeon, CDI, and Seekins are all good. I chose APA because I like their bolt knob and figured id get them both in the same trip, plus jered is a good guy to do business with. Oh FN is also coming out with dbm.
__________________
Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me." Last edited by 5RWill; October 2, 2012 at 12:49 PM. |
October 2, 2012, 11:54 AM | #5 |
Senior Member
Join Date: June 9, 2010
Location: live in a in a house when i'm not in a tent
Posts: 2,483
|
Look on the bright side:
A) You've just stumped the band. B) I'd say that you just found an excuse to buy a new rifle.....
__________________
I'm right about the metric system 3/4 of the time. |
October 2, 2012, 12:44 PM | #6 |
Senior Member
Join Date: September 30, 2012
Location: tennessee
Posts: 119
|
not worked up, just a warped sense of humor. thanks for getting back to me
|
October 2, 2012, 03:32 PM | #7 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
Bluetip,
I bought a bolt action rifle for it's accuracy but don't like the top loading mag. After some research and realizing that putting a magazine on it was going to cost $300+ I decided to rethink the whole thing. I am also biased towards pistol grips. So after quite a bit of research this is where I ended up. Savage 10, Swarovski Z6, XLR chassis, AI 308 mag (10 rounds)
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) Last edited by Eppie; October 2, 2012 at 09:06 PM. |
October 2, 2012, 06:20 PM | #8 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
You won't increase capacity, all of those mags take 5 rounds. You will have to inlet the stock for the bottom metal, but that is not really a deal-breaker if you want a detachable mag. Also take a look at Surgeon, they make detachable mags for the 700.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
October 2, 2012, 06:35 PM | #9 |
Senior Member
Join Date: July 20, 2008
Location: Mississippi
Posts: 2,654
|
10 round AI mags will increase his capacity. All of the DBM i listed takes AI mags or Alpha industries mags, which are shorter than AI mags but have the same in some cases more capacity. Though lately Alpha industries has had some QC issues.
__________________
Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me." |
October 2, 2012, 08:03 PM | #10 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
I just did this upgrade on my rem 700 308. I switched to a Bell & Carlson A2 stock and used a PTG magwell with AICS mags. The channel the bottom metal sits in has to be lengthened and the back section has to be deepened by about 3/16". Its a bit of work but it's worth it. With the PTG magwell and an AICS 5 rnd mag + shipping my order came to $201
. [IMG]C:\Users\Owner\Pictures\Remington 700\New Stock 11.jpg[/IMG] |
October 2, 2012, 08:05 PM | #11 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
That was from Midway.
|
October 2, 2012, 09:12 PM | #12 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
Here are some more pics and a review on the subject of chassis and mags
http://thefiringline.com/forums/show...highlight=xlr"
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) |
October 3, 2012, 07:17 AM | #13 |
Senior Member
Join Date: September 30, 2012
Location: tennessee
Posts: 119
|
Thanks again for all the great info
|
October 4, 2012, 05:26 PM | #14 |
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
I've read literally hundreds of positive reviews on the CDI bottom metal- and never seen a bad one.
For a varmint rifle, why spend hundreds more for Badger? If you're handy with a Dremel, you can DIY the required stock mod... |
October 4, 2012, 11:13 PM | #15 |
Senior Member
Join Date: May 29, 2010
Location: Hampstead NC
Posts: 1,450
|
I went with Badger, but it was really pricey. I also found out that Badger bottom metal doesn't go well with an H&S stock. Managed to make it all work but next time I'm going with a gunsmith, it took way too much cutting then way too much filling to make it both work and look nice. It does work though.
Also keep in mind, if you are going with Badger, or any of the systems that take AI magazines, they are about $100 a piece. Here is my Rem 700 VLS with my wife behind the trigger. |
October 5, 2012, 03:03 AM | #16 |
Senior Member
Join Date: July 20, 2008
Location: Mississippi
Posts: 2,654
|
Good equipment does tend to be pricey. Though badger is one of the highest as well as surgeon. APA's is 275$, CDI and Seekins are around 210-220$.
AI mags are usually around 70$ but they're the best precision rifle mags, the closest thing is alpha industries around 60$. Which i was recently sold on for the good reviews, until bad QC and customer complaints started appearing on the hide. So second choice tends to be a gamble.
__________________
Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me." |
October 5, 2012, 12:12 PM | #17 |
Senior Member
Join Date: February 9, 2011
Location: Central KY
Posts: 552
|
I just had a great experience / am having great experience with CDI. I touch on it about halfway down this thread: http://thefiringline.com/forums/showthread.php?t=502878
__________________
~Mark NRA Endowment FTW |
October 5, 2012, 08:48 PM | #18 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,423
|
Gave up and bought a Scout Squad
I was going to get a Badger setup for my VTR, but when I talked to my dealer and did a little research, there was about 2 hours work. Don't believe any of that drop in mess. Wasn't enough sugar for a dime, so I gave the VTR to my son and bought a M1A Scout Squad.
|
October 6, 2012, 01:36 AM | #19 |
Senior Member
Join Date: July 20, 2008
Location: Mississippi
Posts: 2,654
|
Well it's never drop in unless your stock is inletted for Badger DBM which the VTR isn't..in any case there is almost always going to be some inletting.
__________________
Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me." |
October 7, 2012, 10:41 PM | #20 |
Member
Join Date: January 8, 2012
Posts: 41
|
Here is my AAC SD, I went with the Surgeon Bottom Metal in a McMillan A3-5 GAP Camo stock.
I can't speak for other bottom metals, but the Surgeon is top quality. |
Thread Tools | Search this Thread |
|
|