January 16, 2013, 09:51 AM | #1 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Revolver Loading stand
Who makes a good 44 revolver loading stand?
I've looked at the one that cabelas sells but the reviews say its junk. http://www.cabelas.com/product/Revol...h-All+Products Dixie gun works has a couple but the ram looks awful short to my eye. http://www.dixiegunworks.com/product...ducts_id=13876 I need something thats sturdy or can be made sturdy with simple modifications. I'd be using it for my usual plinking and not CAS, I just want to be able to load off the gun and save the wear and tear on the built in loading rams.
__________________
Beware the man with one gun, he knows how to use it |
January 16, 2013, 10:34 AM | #2 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
http://www.blackdawgecartridge.com/c...R_ID=395929268
OK, I pulled the link to this guy out of a post from 3 years back. Looks sturdy as heck, but I'm a cheapskate. Do you guys know of anything along the same lines as this design but for less than $74?
__________________
Beware the man with one gun, he knows how to use it |
January 16, 2013, 11:22 AM | #3 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
You want high quality and cheap? Make your own. This is all I ever use.
http://thefiringline.com/forums/showthread.php?t=435223 http://thefiringline.com/forums/showthread.php?t=509982 |
January 16, 2013, 11:26 AM | #4 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Dad Gummit!!!
Smokin Joe,
You know darned well that I do flips every time I see those photos. And now I have pulled a muscle in my back. I am sending you the bill from the "saw bones"! . . . . . .
__________________
Seek truth. Relax. Take a breath. |
January 16, 2013, 11:36 AM | #5 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
Like I said, Doc this is all I ever use. Can't get any better.
|
January 16, 2013, 11:42 AM | #6 |
Senior Member
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,653
|
__________________
"I prefer dangerous freedom over peaceful slavery." - Thomas Jefferson |
January 16, 2013, 12:35 PM | #7 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Joe...
Agree.
It is genius personafied!
__________________
Seek truth. Relax. Take a breath. |
January 16, 2013, 12:39 PM | #8 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Smokin Joe,
That is a cool design...load three at once, I would never have thought of that! I might put one of those together just to freak my shootin buddies out. Deerslayer, That one looks like it would hold up to just about anything you could throw at it, I looked at the price and it brought tears to MY eyes...but for me the pain usually stops just after I've paid the credit card bill!
__________________
Beware the man with one gun, he knows how to use it |
January 16, 2013, 01:07 PM | #9 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
found one...
Well, after three hours of looking at loading rams online I've decided to get this one...
http://www.ebay.com/itm/BRAND-NEW-BL...item27ce4901d3 still a little more than I wanted to pay, but it looks sturdy enough to last a really long time. My wife will only beat me til she gets tired...and she tires out quicker if I run
__________________
Beware the man with one gun, he knows how to use it |
January 16, 2013, 01:08 PM | #10 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
Try powder inc the have a good one. Looks a lot like the one from the ebay ad above.
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
January 16, 2013, 01:18 PM | #11 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
actually, I think the ebay guy is actually powder inc...using the same pics and description and both are in clarksville, AR.
Thanks Tom, makes me feel better about the price on ebay.
__________________
Beware the man with one gun, he knows how to use it |
January 16, 2013, 06:29 PM | #12 |
Member
Join Date: January 15, 2013
Location: Texas
Posts: 42
|
|
January 16, 2013, 07:24 PM | #13 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
I bought the one from Powder inc/Ebay.
It does a great job and came with two center pieces so I could do both Colt and Remmies! I hadn't expected that when I ordered it. A helpful tip: get a strong magnet and and put it on the press then just stick your allen wrench and extra center on the magnet and you won't likely loose them. |
January 16, 2013, 08:41 PM | #14 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
I mounted mine on a 3/4 inch thick wood cutting board, wife hasn't even missed it yet. I screwed a 35 mm film can to the corner and keep the spare center& Allen wrench in it.
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
January 17, 2013, 08:58 AM | #15 | |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Quote:
But I was thinking about some 3/4 ply to mount the loading stand. I'll have to get the dimensions of the stand after it gets here, but maybe a piece of ply thats 15" X 20", film canister screwed to one corner to keep up with the accessories. I might put a small table together with some fold up legs on it and dovetail the loading stand board onto it so that its easily removeable...depends on the weather and how much spare time I'm going to have in the evenings after work. If I build it, I'll post pictures of the finished project...might be a week or longer before I can get to it. It's sopping wet here from all the rain and we may have snow coming in tonight.
__________________
Beware the man with one gun, he knows how to use it |
|
January 17, 2013, 09:34 AM | #16 |
Member
Join Date: November 13, 2007
Posts: 84
|
Loading Stand
I shoot 36 Navies for CAS and I just bought a loader. My question is do you gents think disassembling the pistols every time to reload would put more wear on them than just using a loading stand that you don't disasemble the the pistols. Just a thought is all. Gus
__________________
What if the Hokey-Pokey really is what it's all about! |
January 17, 2013, 10:12 AM | #17 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
I have Remington NMA clones so the cylinder is easily removed without having to take the revolver down to parts, no doubt some of the colt guys will jump in here since they are much more qualified than me to answer that one.
__________________
Beware the man with one gun, he knows how to use it |
January 17, 2013, 11:32 AM | #18 | |
Senior Member
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,653
|
Quote:
__________________
"I prefer dangerous freedom over peaceful slavery." - Thomas Jefferson |
|
January 17, 2013, 11:53 AM | #19 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
I made one a couple of years ago, it works great but you are using the guns loading lever, I like my cylinder loader I think it saves wear and tear on the gun.
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
January 17, 2013, 12:40 PM | #20 |
Senior Member
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,653
|
Wow Tom, That is store bought quality stuff right there. You could sell the snot out of something like that on ebay I bet.
__________________
"I prefer dangerous freedom over peaceful slavery." - Thomas Jefferson |
January 17, 2013, 01:00 PM | #21 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
I load all of my Colt style open top cylinders off the gun. Removing the wedge and the barrel causes no wear to the gun. As for the Remingtons I used to own (but no longer do since I saw the light) they could be damaged by removing the cylinder. The cylinder pins on Remingtons can become so tight in the frame due to fouling that they need to be pounded out with a hammer.
|
January 17, 2013, 03:24 PM | #22 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Tom, that is a NICE stand! Looks as good or better than anything I have seen commercially. I've been loading on the gun the traditional way for years and I agree with you and just like the idea of saving the wear and tear on my built in loading rams.
SmokinJoe, I've never shot one of the colt clones before but I may look into one of the open tops someday soon...an 1860 with a 5 1/2 in barrel comes to mind. I've got a job coming up next month that should give me some mad money...
__________________
Beware the man with one gun, he knows how to use it |
January 17, 2013, 05:25 PM | #23 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
Go slow Logan. Addictions can be hard to manage.
|
January 17, 2013, 05:54 PM | #24 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Addictions can be hard to manage
Don't I know it! I think I'm just having withdrawal since I haven't gotten to shoot in almost a week. I dedicate cooler weather to BP shooting but I draw the line at shootin out the barn door while its raining.
__________________
Beware the man with one gun, he knows how to use it |
January 17, 2013, 09:55 PM | #25 | |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
Quote:
That is one mighty fine looking loading stand that Tom has there. I like using my revolver's onboard loading lever and have suffered no detectable wear or tear from it's use. |
|
|
|