The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 27, 2012, 11:09 AM   #1
southjk
Senior Member
 
Join Date: December 5, 2012
Location: Memphis
Posts: 468
How much were they new?

I found out on the serial number sticky above that my 686-3 was produced in 1989. I bought this gun new but since I have the memory of a 120 year old I don't know where or when I bought it or how much I paid. Does anyone know of a resource that shows what the retail prices were for these guns back when they were new?
southjk is offline  
Old December 27, 2012, 01:02 PM   #2
drail
Junior member
 
Join Date: February 2, 2008
Posts: 3,150
New price would have been about 375 to 425 bucks where I was at in 86. Maybe a little less. Most people would go by the value in the blue book of gun values but they're way off on a lot of guns. It's worth more than that now though. Those were very nice guns compared to what they're stamping out and molding now.
drail is offline  
Old December 27, 2012, 01:20 PM   #3
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
No, I don't think there really is a reliable data base on prices....for those days gone by ..../ unless you could find some old catalogs in an archive somewhere.

In the 3rd edition of the S&W standard catalog/collectors book ...there is a note that a model 686-3 in 1989 was mfg'd in a 6", finished in midnight black stainless, .375" semi-target hammer, .312 smooth combat trigger, red ramp, white outline rear sight..and there were reportedly 2,876 made and retail was $445.
( now, I have never seen one ....and I'd sure like one ...and would pay handsomely for it today ...??) ....but ..

You'd have to assume - if yours is a more common stainless version - it was less ...but $50 ...maybe $100 less....I don't remember !!
BigJimP is offline  
Old December 27, 2012, 01:55 PM   #4
southjk
Senior Member
 
Join Date: December 5, 2012
Location: Memphis
Posts: 468
I was a carefree 23 year old at the time and can't imagine I would have spent over $400 (well over two months rent) on a gun but you never know. I probably put it on a credit card and paid the minimum until it was paid off.

The serial number BEJ5xxx means that it was manufactured in 1989 but the wood grip that came with it has July 1990 stamped inside. Why the discrepancy?

edit: BigJim, it is a common stainless 4" model.
southjk is offline  
Old December 27, 2012, 02:31 PM   #5
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
Mfg date ...vs ship date ...could be awhile.../ I think the mfg date for the serial number was late in 1989 ...so its easy to see how it could have stayed in the assembly area for 6 months or longer in those days ( before Just in Time inventory went nuts )....

maybe the original grips were damaged ...even the dealer might have changed them for some reason...

( guys like me - have a whole 20gallon storage bin full of extra S&W revolver grips...)...

686's in 4" and 6" in my area now, used, but in excellent condition are valued at around $ 600 .....so in any event, you have a nice gun / I like the 686's ...and model 19's, and 27's, and 28's...in .357 mag..( and have more than a few ) ......./ .357 mag is my favorite caliber.
BigJimP is offline  
Old December 27, 2012, 09:33 PM   #6
22-rimfire
Senior Member
 
Join Date: February 19, 2005
Location: Tennessee
Posts: 5,323
Easiest place for me to get a feel for pricing are old Gun Digests from the period. They will only list MSRP, but it does give you an idea of pricing then.

1990 Gun Digest (which are 1989 prices) show the 686 priced from $410 to $447.50 (6") depending on barrel length.

Last edited by 22-rimfire; December 27, 2012 at 09:41 PM.
22-rimfire is offline  
Old December 29, 2012, 06:00 AM   #7
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
I also have a 686-3 that I bought new in '89. I was 16 and it was paper route money! My serial number is just a bit before yours.

If my memory serves me well, my 6-inch with white outline rear sight and orange ramp front sight and combat hammer & trigger was retailing at $422, but I think I paid $310 for it through the friend of the family who was a kitchen table FFL.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old December 29, 2012, 08:32 AM   #8
Uncle Billy
Senior Member
 
Join Date: June 10, 2009
Location: Small city in New York
Posts: 482
I have a 6" 686 I bought new in 1986 just after I got my NY CC permit. I paid $375 for it from a gun shop run by a friend of my dad's who was know to overprice stuff and generally was a bit greedy even to his friends. I remember that he told me I was getting a pretty good deal, but his "deals" were everybody else's "full price plus whatever more he could get away with" which I discovered later.
__________________
Despite the cost of living, have you noticed how popular it remains?
Uncle Billy is offline  
Old December 29, 2012, 08:56 AM   #9
MOshooter65202
Senior Member
 
Join Date: February 16, 2011
Posts: 471
I bought a new S&W 629 in 1991,I paid 386.00,which should be comparable pricing to a 686 of the same time period.

Last edited by MOshooter65202; December 29, 2012 at 06:50 PM.
MOshooter65202 is offline  
Old December 29, 2012, 02:18 PM   #10
Glenn Dee
Senior Member
 
Join Date: September 9, 2009
Location: South Florida
Posts: 1,560
In 1973 I paid $98.00 for my S&W model 10 service revolver.
In 1974 I paid $150.00 for my Model 36 chief.
Glenn Dee is offline  
Old December 29, 2012, 02:26 PM   #11
langenc
Senior Member
 
Join Date: August 19, 2007
Location: Montmorency Co, MI
Posts: 1,551
Not to the question but here goes--

K 22 Masterpiece in 1968-$89
Highway Patrollman-357- in early 69 was $90.

In comparable dollars today??

The only winner in the inflation is the IRS.. we'd be better off to go back to 1967 dollars and wages.. except for the IRS and Congress.
langenc is offline  
Old December 29, 2012, 06:00 PM   #12
redhawk45
Member
 
Join Date: July 2, 2012
Posts: 85
In 1976 I paid $104 for a Ruger Super Single Six and in 1989 I paid $404 for a 629 with target stocks, hammer, and trigger. Both guns were new.
redhawk45 is offline  
Old December 30, 2012, 09:13 AM   #13
PzGren
Senior Member
 
Join Date: August 14, 2001
Posts: 1,258
1994 Indy 500 Gun Show, I paid $360some with tax for my 686.

PzGren is offline  
Old January 2, 2013, 05:08 PM   #14
southjk
Senior Member
 
Join Date: December 5, 2012
Location: Memphis
Posts: 468
Wow, good information and good memory guys. Thanks.
southjk is offline  
Old January 2, 2013, 11:02 PM   #15
dscampbell
Member
 
Join Date: August 28, 2011
Location: Central valley of California
Posts: 84
6" SW Model 28 $121.95 September 1972.


Scott Campbell
Remember wheel guns are real guns too
Sent from my iPad using Tapatalk HD
dscampbell is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04738 seconds with 10 queries