April 18, 2013, 03:55 PM | #1 |
Junior Member
Join Date: February 16, 2013
Posts: 2
|
Stock refinishing
Hi, I am new to the forum but very excited after browsing this site. I have a cz527 varmint, it's a tack driver, but the stock is very plain and almost has an orange-ish finish. Is it worth my time to strip the stock and tru oil it? I'm really trying to bring out more grain in the wood. Any suggestions other than a $1000 custom stock?
|
April 18, 2013, 04:00 PM | #2 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Chances are you won't get that stock much better looking than the factory did. The color and pattern of the wood itself is going to be the driver - not the finish over it. That is probably plain walnut at best and may even be a cheaper material.
|
April 18, 2013, 05:34 PM | #3 |
Junior Member
Join Date: February 16, 2013
Posts: 2
|
Not really what I was hoping to hear, anyone else with any suggestions? The stock is Turkish walnut.
|
April 18, 2013, 05:48 PM | #4 |
Senior Member
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 870
|
I'm not sure exactly what your stock looks like, but on very plain stocks I like to jazz them up with a forend cap & pistol grip cap. Ebony is my favorite installed with black epoxy, but other high-contrast wood will work too. Install, strip/sand all, stain a bit darker & then Truoil.
FWIW... ...bug |
April 19, 2013, 07:10 AM | #5 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Turkish walnut can be very figured and beautiful. However, it can also be quite plain. It all depends on what tree it came from.
Look at it this way - what is the worst that can happen if you decide to strip and refinish? At worst, you'll still have a great shooting gun with a home-finished stock. On the other hand, you might get lucky and be able to enhance the looks. |
April 19, 2013, 08:50 AM | #6 |
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
|
Don't forget you can always stain the wood before you oil finish. Just make sure you get pure stain, not stain+finish. But be aware that depending on the previous finish the stain might take unevenly if you don't sand very deep what's not always an option. Good luck
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying. |
April 19, 2013, 09:04 AM | #7 |
Senior Member
Join Date: December 29, 2010
Location: Shoshoni Wyoming
Posts: 2,713
|
I can talk you through the project if you'd like. As a full time gunsmith, I have lots of experience with such things. PM me if you want to try your hand at it. It's not hard to do and the results can be very nice.
|
April 22, 2013, 08:28 AM | #8 |
Senior Member
Join Date: May 25, 2007
Location: South Florida
Posts: 924
|
My experience with CZ wood stocks is that CZ uses mud to finish their wood. Whatever material they use covers up any character the wood may have.
Strip the stock of its original finish with paint remover, sand and whisker the wood. Use Minwax natural stain to bring out whatever character the wood may have. Go here: http://www.thehighroad.org/showthread.php?t=240961 for instructions on how to apply a great finish. (not easy, but well worth the effort) The photos are of my CZ 452 FS refinished in a similar manner to what I suggest.
__________________
Trigger control + Breath control + Sight alignment = Gun Control. http://www.hrpclub.info/ NRA Smallbore Prone Master, High Power Master |
April 22, 2013, 02:42 PM | #9 |
Senior Member
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 870
|
Nice!.... Very nice!
|
April 27, 2013, 12:33 PM | #10 |
Moderator Emeritus
Join Date: April 27, 2013
Location: Ohio
Posts: 1,923
|
Its according to the wood type. If it is indeed walnut, you can strip it, sand it smooth, apply a stain, then sand it lightly to be rid of the raised grain, and apply a new finish. Aniline dye stains are the best for this, not water based.
Most all manufacturers stain their walnut, even Winchester, who had a proprietary color they used, which was a reddish brown. Some even use a filler, before the finish, which is like a thin mud wiped into the pours. |
Thread Tools | Search this Thread |
|
|