|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 29, 2008, 12:25 PM | #1 |
Senior Member
Join Date: January 20, 2008
Location: Berks County, PA
Posts: 1,106
|
How many times can .270 Winchester brass be loaded?
I'm trying to decide how much brass to buy to get started loading for my .270
How many times, on average, can .270 brass be loaded before it should be discarded for safety and/or accuracy reasons? |
March 29, 2008, 12:29 PM | #2 |
Senior Member
Join Date: December 1, 2002
Posts: 2,832
|
Brass life for any cartridge can vary from as little as 3 loads to as many as 20 or so, depending on your methods, how well your dies match your chamber and if you anneal or not.
|
March 29, 2008, 12:36 PM | #3 |
Senior Member
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,647
|
unless your loading at the edge of max or over. you will see a change in accuracy way before the case fails. Most often the case will split at the neck. this will not be unsafe. it will make the chamber dirty. do it enough and you would eventually like as not the chamber will get so dirty you will have difficulty chambering the cartridge. depending on the level of accuracy your at. usually the cases start to loose accuracy between 5-10 reloadings. If you anneal the necks you start over. you can do this several times until the neck gets so thin it will break when you size it.
|
March 29, 2008, 12:38 PM | #4 |
Senior Member
Join Date: January 20, 2008
Location: Berks County, PA
Posts: 1,106
|
How do you anneal cases?
|
March 29, 2008, 04:19 PM | #5 |
Senior Member
Join Date: February 21, 2002
Location: Transplanted from Montana
Posts: 2,311
|
Here are a few sights to read up on annealing
http://www.gun-tests.com/performance/jun96cases.html http://www.6mmbr.com/annealing.html
__________________
I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111 |
March 29, 2008, 07:45 PM | #6 |
Member
Join Date: January 10, 2008
Location: MT
Posts: 69
|
Thanks for the links Shoney.
|
|
|