|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 18, 2006, 04:36 PM | #1 |
Senior Member
Join Date: January 26, 2006
Location: Arkansas-Oklahoma Line
Posts: 336
|
New Stock for my 270WSM and parts don't fit.
Ok I purchased a Boyd Ross thumb hole, laminated wooden stock for my Winchester 270 WSM.
It originally had a synthetic stock and I wanted to upgrade to a nice, comfortable thumb hole stock. This stock was made for the short action winchester. A little bit of sanding, and everything fits nicely. The problem is the bottom plate that covers the magazine spring is part of the synthetic stock. I tried to find a replacement at my local "gunsmith" pawnshop. He informs me that that part is not a replacement part. The non-synthetic stock has a completely different set up. The bottom plate is a door and the trigger guard and door and spring and magazine are all different. This is not a problem except that he says they are not available and if they were they wouldn't bolt strait to my stock. I am open for any input. I am too new to this game to figure it out for myself. Thanks for the help.
__________________
Teach a kid to respect wildlife, then teach a kid to hunt and fish. |
February 18, 2006, 04:37 PM | #2 |
Senior Member
Join Date: January 26, 2006
Location: Arkansas-Oklahoma Line
Posts: 336
|
I can add photo's if need be.
__________________
Teach a kid to respect wildlife, then teach a kid to hunt and fish. |
|
|