October 10, 2014, 04:36 PM | #1 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
200 gr XTP's ?
I am not getting these bullets to group well in my Glock 30s.
I am loading between 5.2 and 5.8 gr of bullseye, taper crimped at .473 with OAL of 1.255. At 25 yds they are grouping about 8 or 9 inches, not much of a group at all more or less just all over. Remington and federal factory ammo with 230 gr jacketed round nose group about 2 inches. What is wrong with my loadings or what am I doing wrong ? |
October 10, 2014, 07:09 PM | #2 |
Member
Join Date: September 21, 2014
Posts: 90
|
I didn't get great results with bullseye, but the 200 gr xtp loved longshot. I did however get pretty good results with bullseye and the 230 gr xtp
|
October 11, 2014, 05:05 AM | #3 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
with the 230 gr xtp what do you taper crimp to and what oal please ?
|
October 11, 2014, 08:11 AM | #4 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
I use the Lee loading manual, and keep to their OAL. Taper crimp with Hornady die.
I however use several different powders. Blue Dot, Long Shot, Unique.... Looking for some Accurate #7. Haven't had any accuracy problems with either bullets, or the powders listed. Of course I'm using a Springfield Armory Champion not a Glock. My 8" patterns are usually out at 50 yards. |
October 11, 2014, 11:46 AM | #5 |
Member
Join Date: September 21, 2014
Posts: 90
|
|
|
|