Centennial 1960 new model army

bajabro · December 22, 2010, 08:53 PM

I came across this while going through my grandfathers stuff after he had passed. It has 4293 stamped on the bottom of the gun and is made in Belgium. Gun seems to be in excellent condition. I dont really need it so i was wondering what it may be worth and where to sell it. Thanks in advance for ant info.

mykeal · December 22, 2010, 10:34 PM

You have an unusual and very well made replica. I happen to own two of those myself. There is a collector's organization with a web site devoted to the gun: http://www.1960nma.org/. They call themselves the Friends of the Centaure Society (FROCS). They'd love to hear about your gun and add it's characteristics to their archives.

As for selling it, I suggest you post an ad in the classified section of this forum; look up near the top on the first page of the thread listings.

Value for a very good condition 1960 NMA (or Belgian Cenature, as it's sometimes known) will be somewhere between $325 and $375.

Here are pictures of my two guns:

Bootsie · December 23, 2010, 02:12 AM

Bajabro & All: Welcome to the exciting world of the Belgian Colt Armies made between 1959 and 1973. My pard Panhandle Paden and me are the guys behind www.1960nma.org.
Your #4293 was made ca. 1965. Does yours have a plain cylinder or is there a naval scene engraved? What is the barrel marking? And what are the inspector marks on the left side of the barrel & frame and on the cylinder (* over letter sideways). You see I am getting all excited. Could you download a data sheet from our website, complete it with the data of #4293 as good as you care and mail it to me at [email protected], ideally with a couple of digital pics. In return I'll let you know what I can about your rare pistol.
Bootsie aka Long Johns Wolf

madcratebuilder · December 23, 2010, 06:03 AM

Depending on variation and condition I have seen some Model 1960's bring in the area of $500 on Gunbroker. Research what variation you have on 1960nma.org. You well reach the largest audience listing it on Gunbroker.

bajabro · December 23, 2010, 09:59 AM

The cylinder has the naval scene engraved on it. The inspector code is "S". What do you mean by the barrel markings?

Bootsie · December 23, 2010, 10:58 AM

Like "1960 NEW MODEL ARMY" CENTENNIAL TRADE MARK roll-engraved on top of the barrel.
Bootsie

bajabro · December 23, 2010, 01:26 PM

That's exactly what it has on it

Hawg · December 23, 2010, 02:43 PM

Bootsie do know his Centaures.

bajabro · January 7, 2011, 07:04 PM

Here are a few pictures of the gun. If anyone is interested let me know.
009.jpg

010.jpg

045.jpg

rdstrain49 · January 7, 2011, 10:10 PM

I am interested, sent you a PM.
Thanks.

madcratebuilder · January 8, 2011, 09:50 AM

That appears to be a 2nd variation with cut out for shoulder stock. Made in 63-64?

bajabro · January 8, 2011, 10:27 AM

I didn't receive any pm

rdstrain49 · January 8, 2011, 02:44 PM

Gotta luv technology.

If you want, get in touch with me at;
[email protected]

Thanks

bajabro · January 19, 2011, 02:35 PM

Item has been listed on gunbroker.com starting @ 7pm #212521543

45-70 Chevron · January 20, 2011, 07:51 AM

You probably will do just as well on this sight to sell the pistol and with out a selling charge.

c.robertson · January 20, 2011, 09:41 AM

Opinions are like some other body parts / places, everybody has one, HOWEVER:
I think your 'buy it now' price of $300.00 was quite low. If you were willing to take a starting bid of $200.00. I would think that pistol is worth quite a bit more, but I am not that knowledgable on such items.

Doc Hoy · January 20, 2011, 11:43 AM

...at a buy now of 300.00.

I had my finger on the button but chickened out at the last minute.

Fingers McGee · January 20, 2011, 12:35 PM

$300 is low. They've been going for close to twice that lately IIRC.

FM

madcratebuilder · January 21, 2011, 09:25 AM

Some one got a great buy, that is a nice one.

Fingers McGee · January 21, 2011, 12:22 PM

Quote:

Some one got a great buy, that is a nice one.

A very good deal.

December 22, 2010, 08:53 PM	#1
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	Centennial 1960 new model army I came across this while going through my grandfathers stuff after he had passed. It has 4293 stamped on the bottom of the gun and is made in Belgium. Gun seems to be in excellent condition. I dont really need it so i was wondering what it may be worth and where to sell it. Thanks in advance for ant info.

January 20, 2011, 11:43 AM	#17
Doc Hoy Senior Member Join Date: October 24, 2008 Location: Naples, Fl Posts: 5,440	It'll go pretty quick... ...at a buy now of 300.00. I had my finger on the button but chickened out at the last minute. __________________ Seek truth. Relax. Take a breath.

January 20, 2011, 12:35 PM	#18
Fingers McGee Senior Member Join Date: March 19, 2008 Location: High & Dry in Missouri Ozarks Posts: 2,113	$300 is low. They've been going for close to twice that lately IIRC. FM __________________ Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 22, 2010, 10:34 PM	#2
mykeal Senior Member Join Date: October 8, 2006 Location: Northern Michigan Posts: 2,772	You have an unusual and very well made replica. I happen to own two of those myself. There is a collector's organization with a web site devoted to the gun: http://www.1960nma.org/. They call themselves the Friends of the Centaure Society (FROCS). They'd love to hear about your gun and add it's characteristics to their archives. As for selling it, I suggest you post an ad in the classified section of this forum; look up near the top on the first page of the thread listings. Value for a very good condition 1960 NMA (or Belgian Cenature, as it's sometimes known) will be somewhere between $325 and $375. Here are pictures of my two guns:

December 23, 2010, 02:12 AM	#3
Bootsie Senior Member Join Date: April 30, 2007 Location: Hofheim/Germany Posts: 102	Bajabro & All: Welcome to the exciting world of the Belgian Colt Armies made between 1959 and 1973. My pard Panhandle Paden and me are the guys behind www.1960nma.org. Your #4293 was made ca. 1965. Does yours have a plain cylinder or is there a naval scene engraved? What is the barrel marking? And what are the inspector marks on the left side of the barrel & frame and on the cylinder (* over letter sideways). You see I am getting all excited. Could you download a data sheet from our website, complete it with the data of #4293 as good as you care and mail it to me at [email protected], ideally with a couple of digital pics. In return I'll let you know what I can about your rare pistol. Bootsie aka Long Johns Wolf

December 23, 2010, 06:03 AM	#4
madcratebuilder Senior Member Join Date: November 2, 2007 Location: Northern Orygun Posts: 4,923	Depending on variation and condition I have seen some Model 1960's bring in the area of $500 on Gunbroker. Research what variation you have on 1960nma.org. You well reach the largest audience listing it on Gunbroker.

December 23, 2010, 09:59 AM	#5
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	The cylinder has the naval scene engraved on it. The inspector code is "S". What do you mean by the barrel markings?

December 23, 2010, 10:58 AM	#6
Bootsie Senior Member Join Date: April 30, 2007 Location: Hofheim/Germany Posts: 102	Like "1960 NEW MODEL ARMY" CENTENNIAL TRADE MARK roll-engraved on top of the barrel. Bootsie

December 23, 2010, 01:26 PM	#7
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	That's exactly what it has on it

December 23, 2010, 02:43 PM	#8
Hawg Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 16,188	Bootsie do know his Centaures.

January 7, 2011, 07:04 PM	#9
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	Here are a few pictures of the gun. If anyone is interested let me know. 009.jpg 010.jpg 045.jpg

January 7, 2011, 10:10 PM	#10
rdstrain49 Member Join Date: December 30, 2010 Location: South Central, Iowa Posts: 65	I am interested, sent you a PM. Thanks.

January 8, 2011, 09:50 AM	#11
madcratebuilder Senior Member Join Date: November 2, 2007 Location: Northern Orygun Posts: 4,923	That appears to be a 2nd variation with cut out for shoulder stock. Made in 63-64?

January 8, 2011, 10:27 AM	#12
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	I didn't receive any pm

January 8, 2011, 02:44 PM	#13
rdstrain49 Member Join Date: December 30, 2010 Location: South Central, Iowa Posts: 65	Gotta luv technology. If you want, get in touch with me at; [email protected] Thanks

January 19, 2011, 02:35 PM	#14
bajabro Junior Member Join Date: December 22, 2010 Posts: 6	Item has been listed on gunbroker.com starting @ 7pm #212521543

January 20, 2011, 07:51 AM	#15
45-70 Chevron Junior Member Join Date: January 13, 2011 Location: Snowflake Arizona Posts: 7	You probably will do just as well on this sight to sell the pistol and with out a selling charge.

January 20, 2011, 09:41 AM	#16
c.robertson Senior Member Join Date: October 23, 2009 Location: Grain Valley Mo. Posts: 102	Opinions are like some other body parts / places, everybody has one, HOWEVER: I think your 'buy it now' price of $300.00 was quite low. If you were willing to take a starting bid of $200.00. I would think that pistol is worth quite a bit more, but I am not that knowledgable on such items.

January 21, 2011, 09:25 AM	#19
madcratebuilder Senior Member Join Date: November 2, 2007 Location: Northern Orygun Posts: 4,923	Some one got a great buy, that is a nice one.