January 17, 2010, 12:38 AM | #1 |
Senior Member
Join Date: January 23, 2006
Location: Indiana
Posts: 514
|
Magpul PRS stock
I am building an Ar15 and plan on using the magpul stock. I cant seem to find any info on what hardware I will need besides a rifle length buffer tube. Are there any screws that I will need to hold the stock onto the tube? And also Does the buffer tube just simply screw onto the lower, or is there another lock ring or something?
__________________
Il keep my freedom, my guns, and my money. You can keep the change. |
January 17, 2010, 12:42 AM | #2 |
Senior Member
Join Date: January 23, 2006
Location: GA
Posts: 1,862
|
http://www.magpul.com/pdfs/technotes...PRSInstall.pdf
All you need before ordering the kit is the rifle length buffer tube. Then you'll attach the stock to the buffer tube with a screw on the end (provided). The buffer tube screws into the lower; nothing else holds it on. |
January 17, 2010, 11:49 AM | #3 |
Senior Member
Join Date: January 23, 2006
Location: Indiana
Posts: 514
|
thanks zoomie
__________________
Il keep my freedom, my guns, and my money. You can keep the change. |
|
|