AR/AK Drawings, prints, schematics?

BoogieMan · April 30, 2012, 04:48 PM

I wondering where I can find prints for AR lowers and or all the assemblies but primarely the lowers. This is many times refered to as the TDP or technical data package. Would also be interested in any other semi auto pistol and rifle prints. The things are so common the info must be readily available for a nominal fee or free.

zoomie · April 30, 2012, 04:49 PM

http://www.brownells.com/.aspx/schematics/ ?

I also get a lot of results when I google "AR-15 schematic."

BoogieMan · April 30, 2012, 05:16 PM

I have googled and I am working through the results. What I am looking for are the dimensioned drawings for the lowers. The assembly drawings are helpful but dont tell the intricacies. I have access to DOD TDP but I dont have a contract to manufacture AR's so its not on an accesable list for me. Lots of people on other boards have asked about the same. I figured this would be relatively easy to find.

zoomie · April 30, 2012, 05:20 PM

http://www.cncguns.com/downloads.html

BoogieMan · April 30, 2012, 05:25 PM

Thanks you much. I just found that before I could refresh the page. Very nice package that this guy has put out.

April 30, 2012, 04:48 PM	#1
BoogieMan Senior Member Join Date: April 4, 2012 Location: South Jersey Posts: 2,217	AR/AK Drawings, prints, schematics? I wondering where I can find prints for AR lowers and or all the assemblies but primarely the lowers. This is many times refered to as the TDP or technical data package. Would also be interested in any other semi auto pistol and rifle prints. The things are so common the info must be readily available for a nominal fee or free.

April 30, 2012, 04:49 PM	#2
zoomie Senior Member Join Date: January 23, 2006 Location: GA Posts: 1,864	http://www.brownells.com/.aspx/schematics/ ? I also get a lot of results when I google "AR-15 schematic."

April 30, 2012, 05:16 PM	#3
BoogieMan Senior Member Join Date: April 4, 2012 Location: South Jersey Posts: 2,217	I have googled and I am working through the results. What I am looking for are the dimensioned drawings for the lowers. The assembly drawings are helpful but dont tell the intricacies. I have access to DOD TDP but I dont have a contract to manufacture AR's so its not on an accesable list for me. Lots of people on other boards have asked about the same. I figured this would be relatively easy to find.

April 30, 2012, 05:20 PM	#4
zoomie Senior Member Join Date: January 23, 2006 Location: GA Posts: 1,864	http://www.cncguns.com/downloads.html

April 30, 2012, 05:25 PM	#5
BoogieMan Senior Member Join Date: April 4, 2012 Location: South Jersey Posts: 2,217	Thanks you much. I just found that before I could refresh the page. Very nice package that this guy has put out.