August 28, 2000, 02:33 PM | #1 |
Senior Member
Join Date: October 13, 1999
Location: Norcross, GA USA
Posts: 327
|
Another thread inspired this question. Where is the best place to buy body armor? I wouldn't mind getting some for range use but I don't want to spend a fortune due to the limited use. I wouldn't have a problem with used (worn, not shot) so if anyone has any suggestions, I'd like to hear them. Also, I know about the grading but if you have any thoughts as to comfort, longevity, etc, pass those on as well.
|
August 29, 2000, 12:43 AM | #2 |
Senior Member
Join Date: January 29, 2000
Posts: 275
|
Surplus stores here sell it, pretty cheap, as police trade in's, etc.
If you can't find what you're looking for anywhere else, e mail me, and I'll see about hooking you up. I'd be happy to help you. Tom ------------------ A "Miss" is the ultimate overpenetration! You can never be too rich, too skinny, or too well armed! Wake up and realize that you have the moral imperative of action..!!! |
August 29, 2000, 06:00 AM | #3 |
Senior Member
Join Date: August 28, 2000
Location: San Diego, CA
Posts: 111
|
For used body armor, Ebay has tons up for auction. If you want new, I'd recommend you look for clearance items on Galls (www.galls.com) or look at Armor Technology (www.armortechnology.com).
I bought a brand new level 2+ San Diego Style (full, front to rear wrap) vest for about $350 (with shipping). It came with a 6"x8" Spectrashield trauma plate as well. Give them a call. I highly recommend Armor Tech. |
August 29, 2000, 12:17 PM | #4 |
Senior Member
Join Date: March 28, 2000
Posts: 4,055
|
I'd stay away from used. Body armor can be ruined if treated poorly and you won't know until it's too late. If it was improperly cleaned (wrong dry cleaning method or bleach), the fibers will have been weakened, but there's no way to tell by inspection. Jared
|
August 29, 2000, 09:03 PM | #5 |
Member
Join Date: October 25, 1999
Location: Arkansas
Posts: 44
|
Bluegrass Armory gets in police trade-in's and resells them for 50.00-60.00. Mine looked brand new.
scottMO ------------------ |
August 30, 2000, 08:01 AM | #6 |
Senior Member
Join Date: September 23, 1999
Location: Fairfax, Virginia
Posts: 233
|
Give the folks over at Guardian Technologies a call or check out their website: http://www.guardiantech.com/main/publish/frame.cfm
|
Thread Tools | Search this Thread |
|
|