January 6, 2010, 01:09 PM | #1 |
Member
Join Date: December 24, 2009
Location: Estill County, Kentucky
Posts: 57
|
ruger mark 3 .22 question
ok i think the internal lock is set and to unlock it the safty has to be on. to put the saftey on the hammer has to be cocked but to do that you have to pull back the slide and it wont come back. i think the internal lock is what is preventing me from moving the slide. can anyone share some info on how i might fix this???
__________________
Before I refuse your questions, I have an opening statement. - Ronald Reagan |
January 6, 2010, 08:38 PM | #2 |
Senior Member
Join Date: June 23, 2009
Posts: 440
|
Usually when you are unable to fully retract the bolt on a Ruger .22 LR pistol, it is because of improper reassembly after field stripping it.
Field strip the pistol and reassemble it, making sure the hammer strut is positioned properly before reinstalling the mainspring housing.
__________________
A liberal firearms owner and 2A supporter from New Jersey (yes, we do exist). SIG Sauer P6, S&W Model 59, Ruger Mark II "NRA Endowment" special edition, Mossberg 500 12-gauge. Please check out WhichGun.com, a firearms reference and buying guide. |
January 6, 2010, 09:51 PM | #3 |
Member
Join Date: December 24, 2009
Location: Estill County, Kentucky
Posts: 57
|
ok i fixed that but not i have to tap the back of the bolt after pulling it back and pushing the bolt release
__________________
Before I refuse your questions, I have an opening statement. - Ronald Reagan |
Thread Tools | Search this Thread |
|
|