|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 10, 2013, 03:42 AM | #1 |
Senior Member
Join Date: June 20, 2009
Posts: 1,102
|
Ruger Target Model .22 autoloader?
Quick, someone convince me why I should buy a 5 1.2 bull barreled Stainless Target Model Ruger!
Is it that the things are sso accirate that you can blow Candles out with them, or are they superbly reliable, digesting almost sny .22 fodder out there? Is thegrip angle optimum for both target and plinking operations or do you need custom grip panels? Everyone knows the CIA and Mob Gangsters use the Ruger .22 Suppressed for "social work" and it has been so competent at the task that is the favored assians choice? Prices for the Stainless beauty are under or a bit over $500 and that's a real value! WHy should I buy one? ZVP |
January 10, 2013, 11:09 AM | #2 |
Senior Member
Join Date: October 12, 2004
Location: Viera, Florida
Posts: 1,340
|
Well, they certainly are accurate. I’ll admit mine was pretty tricked out when I shot this target, but that influenced the ease of shooting, not the accuracy.
They generally feed just about anything. Mine won't cycle with CCI “Quiet” or Aguila 38 gr subsonic ammo, but perks with everything else. The other cool thing about them is the billions of ways they can be tricked out. The one below has very few Ruger parts left in it. Volquartsen fire control parts, Tactical Solutions upper, FO front sight, TC Contender rear sight, aftermarket grips and mag base pad, titanium bolt racker. |
January 10, 2013, 11:12 AM | #3 |
Senior Member
Join Date: October 12, 2004
Location: Viera, Florida
Posts: 1,340
|
Oh, and speaking of suppressed:
|
January 10, 2013, 11:18 AM | #4 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
At some point, you're not shooting a Ruger Mark any more
__________________
Shoot smart. Shoot S-Mart. |
January 10, 2013, 12:38 PM | #5 |
Senior Member
Join Date: May 31, 2004
Location: Minnesota
Posts: 2,432
|
The basic models shoot just as well.
Mark II NRA/WBR commemorative. This gun stays with me for the duration. |
January 10, 2013, 01:07 PM | #6 |
Senior Member
Join Date: October 3, 2012
Posts: 1,229
|
I can get 3/4" groups, rested at 25 yards, with my scoped Mark II Target stainless 5.5". Seriously. I never would have thought a pistol could be so accurate until I installed the scope. The Mark Series Rugers will shoot hundreds of thousands of rounds before needing any type of repair. You will wear out long before they will. That accuracy, and durability, is all I will ever need.
|
January 10, 2013, 02:44 PM | #7 |
Senior Member
Join Date: February 2, 2011
Location: San Francisco
Posts: 301
|
For the price-imo-it's worth every dollar.
Pros: Fixed-Barrel design for precise target level accuracy/ Heavy bull barrel Least finicky -IMO- with all variations of .22lr ammo out there Proven for decades as rugged and long lasting with little up-keep Unlimited upgrades/ Mods and very affordable price Cons: Not so good out of the box trigger MK3 models have the un-needed LCI & mag release trigger lock-up! Breakdown seems to be difficult to some newcomers I've got one and it's incredibly accurate to the point that i've used it to hunt small game when scoped. Never have problems with ammo and I've put sofar about 12 k through the gun in th 2 years I've had it so far. Last edited by m_liebst; January 10, 2013 at 02:52 PM. |
January 10, 2013, 03:03 PM | #8 | |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
Quote:
__________________
Shoot smart. Shoot S-Mart. |
|
January 10, 2013, 06:02 PM | #9 | |
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
Quote:
Keep the instruction manual handy the few few times and you'll be fine. |
|
January 10, 2013, 06:21 PM | #10 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
How to define difficult relative to pretty much everything else? Number of steps? Tools recommended by the manual? Tools actually needed? Likelihood of scratching something? Maybe telekinetic powers to manipulate internal parts as you reassemble it, which is even harder than takedown. Cleaning difficulty? Holy nooks, crannies, and angles!
I won't deny Ruger Marks are THE king of affordable 22 quality. I owned a Mk3 long, stainless fluted (Target Hunter I think it was). Extremely accurate and reliable. But honestly I just didn't have the patience since I fully clean after every shoot.
__________________
Shoot smart. Shoot S-Mart. |
January 10, 2013, 06:57 PM | #11 |
Senior Member
Join Date: December 21, 2000
Posts: 4,193
|
The Ruger MK series pistols need no tools to disassemble nor reassemble. Well maybe a paper clip to ease pulling out the takedown lever on the back of the grip.
If you can read the manual, and actually have it with you when you take apart the psitol for cleaning then you can easily do it. There are also a plethora of Youtube vids now available to walk you through it, so there really are no excuses.
__________________
Pilot |
January 11, 2013, 11:38 PM | #12 | |
Senior Member
Join Date: October 3, 2012
Posts: 1,229
|
Quote:
You dont need telekinesis to point the muzzle skyward, and pull the trigger at the same time, while closing the mainspring housing. If you truly cant do this, google Majestic Arms Speed Strip Kit. |
|
January 11, 2013, 11:48 PM | #13 |
Senior Member
Join Date: December 15, 2005
Posts: 633
|
It is an excellent, accurate and reliable pistol. Disassembly becomes easy with a little practice.
|
January 12, 2013, 10:48 PM | #14 |
Senior Member
Join Date: December 10, 2007
Location: Arizona
Posts: 980
|
The only tool needed for disassembly...IMO
|
January 12, 2013, 10:59 PM | #15 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
OK, I'll quit hating and I'll admit I was going too far. In fact I would like to have my Mk3 long fluted stainless back now that I'm disciplined in cleaning patience.
__________________
Shoot smart. Shoot S-Mart. |
January 12, 2013, 11:49 PM | #16 |
Senior Member
Join Date: September 23, 2006
Location: Alexandria, VA
Posts: 5,210
|
I got one for my birthday this year and its fast becoming my favorite range gun. I've only shot it at around 25 yards and its plenty accurate. I recently changed the front sight to a hiviz and that will probably only modifications I make. |
January 13, 2013, 07:09 AM | #17 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,767
|
The range I usually go to, only has seven yard handgun lanes, so I can't brag about any long range shooting, but this is about typical of what my MK III, 22/45, with a 4" bull barrel, and a cheap BSA red dot sight would do at that range. It was actually booringly accurate. Get the dot on target, pull trigger, and reacquire target, pull trigger again. This was about seventy rounds, standing, two handed hold, while I waited for the range to go cold. Most of them just went through the hole after a few minutes. The ammo was either Federal bulk pack, or American Eagle I forget which. The ones that missed the X ring, I rushed the shots.
I don't have that gun anymore, and it's one of the few guns I've ever sold that I wish I had back. I may have to buy another one one of these days. For all the hoopla about cleaning them, it's not that hard if you just read and follow the directions. It's that simple. The trick is to READ and FOLLOW...to the letter. Every word is important, as is every step. Personally I just spray mine with Gunscrubber most of the time and put some oil on it and it's good to go.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
|
|