|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 15, 2005, 05:17 PM | #26 |
Senior Member
Join Date: January 19, 2005
Location: C/U, IL
Posts: 116
|
Fremmer, it was originally in the handloading and reloading forum, which was the wrong forum. And blob, my only beef is if you are the one that posted the threads in the links I gave. If you aren't then I have no problem.
__________________
"...I feel sorry for people who don't drink. When they wake up they know that's as good as they're going to feel all day." Don't Get Wenzeled Why? Because shooting stuff is fun. |
November 15, 2005, 09:19 PM | #27 |
Senior Member
Join Date: June 19, 2005
Location: Nebraska
Posts: 3,482
|
Weeell, I guess I'll have to admit that it might not belong in the handloading forum.........
|
November 15, 2005, 09:39 PM | #28 |
Member
Join Date: July 7, 2005
Location: Central Louisiana
Posts: 32
|
Finished trigger adjustment
Well I decided to go ahead and adjust the trigger on my Rem 700. After reading the directions it was quite simple and wasn't near as hard as some I have worked on. First thing I did was check the stock trigger pull and it was a shade under 8 LBS.Then I read the directions several times through and highlited the areas showing adjustments of the screws. Then I made sure I had the proper screw driver which was in my set of Chapman gun screw drivers set. This is a must as the screws are small and are sealed with sealer. I took the stock off and removed the bolt. I cleaned all the sealer off and the screws were easy to move. I followed the directions and set the pull at 4 LBS. Then I tried all the safety guides and everything worked real well. Now all I have to do is to get some sealer tomorrow and seal the screws real good.
It was easy to follow and it came out safe and sound and I saved $30.00 for the gun smith to do the same thing I did. If anyone doesn't understand the directions you might not want to do it but anyone who has worked on rifles and is very responisble won't have any problem at all. All Remington did was adjust the spring tension and the over travel down until it was set at 8 LBS. I like a 3 1/2-4 lb pull and it came in fine. Could have went lower but left it at 4 lb. |
November 15, 2005, 09:43 PM | #29 |
Member
Join Date: July 7, 2005
Location: Central Louisiana
Posts: 32
|
wrong place
Yeah this was posted in the wrong place sorry about that.
|
November 16, 2005, 12:51 AM | #30 |
Junior member
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
|
And have you tested it for slam firing
WildwithamalletAlaska |
November 16, 2005, 07:51 PM | #31 |
Member
Join Date: July 7, 2005
Location: Central Louisiana
Posts: 32
|
tested well
yeah the trigger has been tested real good. I have redone triggers before and this one is about the easiest to set and still be safe. Same procedure the smith uses unless someone want's a real light (ounces) pull then he addes some things. But this is just simply adjusting for a lighter pull from 8 down to 4.
|
November 17, 2005, 09:23 PM | #32 |
Senior Member
Join Date: July 19, 2004
Location: Ms
Posts: 1,160
|
You should be fine there
The problem comes in when folks try to adjust the trigger to where it has very little engagement on the sear and the pull weight is down below 3 lbs. You should be fine where you are at. I might add that although what you did is very, very easy, the trick comes in when you are trying to get the pull as low as it can go.
I use a Bold Optima trigger a good bit of the time and with it, the trigger can be adjusted down just like the model 700 is. It is simply a better trigger that won't jar off as easily as the model 700 trigger does because it has better parts in it like the ones I suggested to you. If you want to go lower with it, I would suggest looking into changing them out. |
December 30, 2005, 05:10 PM | #33 |
Member
Join Date: December 25, 2005
Location: Colorado Springs
Posts: 22
|
An old thread...but FWIW, Jewell in my Remmy is set at 4oz. It's a bench gun and no way would I actually walk around with a trigger set at 4oz, but for that 4oz it's as safe as it's going to get. The Jewell very nicely solves the problems and arguments. Sure, it costs more than a few pennies, but what's a human life worth? -Rod-
__________________
Patriot's America Forum "I shoot because I can, because I love it, because I do it well." LIVE Streaming LAPD Scanner. LAPD/LASO/EMS |
Thread Tools | Search this Thread |
|
|