|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 15, 2002, 07:32 PM | #1 |
Senior Member
Join Date: April 13, 2000
Location: bluefield
Posts: 735
|
hk uspc .40 s&w bar-sto problem
i have new drop in bar-sto barrel for my hk uspc .i have tried 180 grain rainer with power pistol,unique,and bluedot.i get nothing under 4 inches at 25 yards.it has less than 100 rounds down range.will it get better ? i can put the 357 sig barrel in, it's a factory barrel and it will shoot just over 2 inches at 25 with just about any load.i could not load my 357 sig's to shoot as bad as the 40 does even if i tried.i have 4 357 sig's.could it be a bad barrel ? how many rounds do i try before i call it a bad barrel.will a jhp or a fmj bullet help.or is it that a bar-sto will not shoot a rainer bullet,thanks,keith
__________________
It's not just a gun it's the symbol of freedom |
June 15, 2002, 07:52 PM | #2 |
Senior Member
Join Date: January 14, 2000
Location: Southern California
Posts: 1,089
|
Without knowing your powder charge weight and overall length it would be difficult to call the barrel a problem. However, if you loads are from the book, then give Irv Stone a call at Bar-Sto. His barrels are the best, and if, for any reason, they don't run right in your gun, he will make good on it.
|
June 17, 2002, 10:15 PM | #3 |
Senior Member
Join Date: April 13, 2000
Location: bluefield
Posts: 735
|
i fixed it the barrel is ok.it will not shoot at 1.125 col but shoots great at a col of 1.135
__________________
It's not just a gun it's the symbol of freedom |
|
|