June 6, 1999, 11:47 AM | #1 |
Guest
Posts: n/a
|
Hey gang,
I just finished getting toxic goo off my new israeli FN/FAL mags. Now that I am ready to put it all back together I seem to recall that you are not supposed to oil the inside, spring, and follower because it collects dirt. A myth? I was thinking tetra gun oil so that a really thin film will be applied, any suggestions? Thanks, olazul |
June 6, 1999, 12:19 PM | #2 |
Senior Member
Join Date: May 1, 1999
Posts: 159
|
I would leave it dry or use a dry lubricant such as graphite or teflon powder. Oil does attract dirt and residue, no question. Stubby
|
June 6, 1999, 12:57 PM | #3 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,843
|
Good advice given above. I have wiped down mag springs with Breakfree, and then wiped the same springs down with a dry rag to remove the oil (forgive me for I have knowingly sinned). Dry teflon powder is the best way to go though.
------------------ Vigilantibus et non dormientibus jura subveniunt |
June 7, 1999, 10:02 AM | #4 |
Guest
Posts: n/a
|
Thanks guys,
Rem-drilube it is! Olazul |
|
|