|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 17, 2012, 05:00 PM | #1 |
Senior Member
Join Date: June 23, 2011
Location: asheville north carolina
Posts: 556
|
Wanting to refurbish an old rifle
But this is my first attempt at any refurbishment work. I want to blue the barrel and somehow get a gash out of the wood stock. How would I go about this? It is an old savage.
PS- I did not google this because I trust TFL members alot more than google. Thanks for reading my post and please help!!! I want to keep this rifle forever. Last edited by HALL,AUSTIN; January 17, 2012 at 05:01 PM. Reason: additional information |
January 17, 2012, 05:27 PM | #2 |
Senior Member
Join Date: June 25, 2006
Location: The Keystone State
Posts: 1,970
|
renew
post pix of the Savage so that we might visualize the repair you are considering.
__________________
"Peace is that brief glorious moment in history when everybody stands around reloading". --Thomas Jefferson |
January 17, 2012, 05:32 PM | #3 | |
Senior Member
Join Date: December 29, 2004
Posts: 3,351
|
Quote:
Sometimes it sounds a lot worse than it really is. |
|
January 17, 2012, 09:26 PM | #4 |
Senior Member
Join Date: June 23, 2011
Location: asheville north carolina
Posts: 556
|
I cant post pictures because I am using a smart phone... No computer but it is a gash about six inches long and 2-2.5mm deep. One small patch of surface rust on barrel, but its a great shooter, just want it to look that way.
|
January 18, 2012, 10:48 AM | #5 |
Senior Member
Join Date: December 15, 2004
Location: East TN.
Posts: 207
|
If the gash is actually more of a scrape (No wood removed from the area), you can try to steam the area with a wet towel and hot iron. This will cause the wood fiber to swell and fill the indentation.
Just a thought |
January 18, 2012, 04:28 PM | #6 |
Member
Join Date: January 20, 2010
Location: Bourbon, IN
Posts: 37
|
If it comes down to it, you could find a replacement stock. It would give you a chance to freshen up an old favorite. Re-blueing a gun isn't too hard either, you can find tutorials online, but as you said, the guys on the forum would probably be better suited to tell you what to do.
|
January 18, 2012, 07:48 PM | #7 |
Member
Join Date: January 2, 2012
Location: Elizabethtown, Pa
Posts: 60
|
If the rust is light you can try burnishing it out with 0000 steel wool.
|
January 18, 2012, 11:32 PM | #8 |
Senior Member
Join Date: June 23, 2011
Location: asheville north carolina
Posts: 556
|
The rust is light, so I will try to brush it out... As soon as I learn how to blue this puppy. And I'm just going to buy a new stock. But can I just sand and restain the whole stock as a project? Will it look decend or will it look like a 2 tone wanna be, half butt operation? And how do i take out the stain/wood sealant without sanding? Dont want to deatroy the checkering.
|
January 19, 2012, 01:06 PM | #9 | |
Senior Member
Join Date: December 29, 2004
Posts: 3,351
|
Quote:
Some are easier to strip than others, but sanding is about the hardest way there is to strip a finish. I thought cell phones are the new answer? |
|
January 19, 2012, 03:54 PM | #10 |
Senior Member
Join Date: June 23, 2011
Location: asheville north carolina
Posts: 556
|
Well I like my smart phone, TFL doesnt... So how the heck will i strip the stain?
|
January 19, 2012, 04:41 PM | #11 |
Member
Join Date: January 15, 2012
Posts: 25
|
Stripping stain... Go to your local hardware guy and ask him for something to remove stain. The problem: stain is exactly that, a stain. You aren't going to remove the "stain" which is the coloration of the wood introduced by the stain. What you are going to remove is the _finish_ of the wood with a stripper. Many finishes include a protectant (i.e. polyurethane) and a stain all in-one which you can remove most of the stain.
So once you strip the finish, sand it smooth, fix the scrape (the steam & sand method mentioned earlier, or with some wood putty), re-finish. This whole process will take you all day, partly because you need to wait for the wood to dry before finishing, then wait for the finish to dry before applying another coat. It is time consuming, but worth the effort to know that you have a shiny new stock. |
January 20, 2012, 07:18 AM | #12 |
Senior Member
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
|
Hall, I have to ask how much hands on around the house work do you have or what kind of work have you done?
Stripping the finish on a gun stock would be the same as stripping wood furniture and as far as bluing a barrel you will just be doing a spot cold blue. To do a complete re blue of the barrel you will need equipment (expensive) equipment to do a professional job. My opinion is that firearms with the usage wear that you are describing means just that A firearm that has been used patina is a wonderful thing. Just my view point.
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer, ICORE Range Officer, ,MAG 40 Graduate As you are, I once was, As I am, You will be. |
January 20, 2012, 04:31 PM | #13 | |
Senior Member
Join Date: December 29, 2004
Posts: 3,351
|
Quote:
There are pigment 'stains' and they are nothing more than thin paint and can be stripped. It can be hard to get the pigment out of recesses and pores in the wood though. Other 'stains' are actually dyes, and can usually be bleached out, at some sacrifice in any color the wood itself had. If you are willing to color the wood darker you can normally hide any minor 'stain' that cannot be removed. |
|
January 22, 2012, 08:50 AM | #14 |
Junior Member
Join Date: December 27, 2011
Location: Texas
Posts: 9
|
Hall,
I refinished an old Stevens last month (stock and blue). I'll try to post some picks later. This was the first and only rifle I've every refinished and it came out pretty well. It did take me a lot time though. Regarding what to use to strip the stain/sealer from the stock, I used oven cleaner and that worked absolutely great! I simply sprayed it on, let it soak for about 10 mins and then rinsed. After that, I would let it sit over-night and dry only to repeat the process the next day. Before restarting though, I would sand lightly with 250 grit sand paper. After two or three times, I had clean unstained wood. The dents within the stock I steamed out as suggested above. Steaming will not work if the dent caused tears or breakage within the wood's fiber. For smooth dents, a wet wash cloth in conjunction with a steam iron will get the smooth (rounded) dents out. Just keep the wash cloth wet and give it 15-25 minutes for each dent. It's a slow process but does work (on the right type of dent). While not perfect, I think it looks a little better... |
January 22, 2012, 09:24 AM | #15 |
Junior Member
Join Date: December 27, 2011
Location: Texas
Posts: 9
|
Regarding blueing, I'll post some pics later along with some of what I went threw if you're interested. If so, I'll grab some stills out of a few video clips I took during the process.
|
|
|