|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 10, 2013, 10:48 AM | #1 |
Senior Member
Join Date: January 18, 2006
Location: Bowling Green,KY
Posts: 433
|
Who works on Service Six Triggers?
My like new 4'' SS Service Six could use a better trigger. Who could I send it to for this work? THANKS!
__________________
Bowling Green, KY |
January 10, 2013, 12:16 PM | #2 |
Senior Member
Join Date: October 19, 2008
Posts: 635
|
My local guy does them, as will most local gunsmiths--rugers have been around for a long time.
My only ruger, a single ten, was pretty stiff, so I installed a wolff spring kit, and it is much better, although probably not up to a good trigger job. Main thing for me was the hammer spring was so strong, I got tired of cocking it. The new spring solved that issue. |
January 10, 2013, 01:24 PM | #3 |
Senior Member
Join Date: January 18, 2006
Location: Bowling Green,KY
Posts: 433
|
Anyone have a link where I can find out how to take it apart and PUT it back again?
__________________
Bowling Green, KY |
January 10, 2013, 03:48 PM | #4 |
Senior Member
Join Date: October 19, 2008
Posts: 635
|
EDIT: Oops, I read single where it said service. Apologies. See next response for better vids.
Here's the offical ruger video: http://youtu.be/UfOXBa8K8Ow and reassembly: http://youtu.be/3zEKDqwkgEs Note that this is part of the basic field stip according to Ruger(!). Last edited by Zhillsauditor; January 10, 2013 at 06:17 PM. |
January 10, 2013, 04:02 PM | #5 |
Senior Member
Join Date: August 3, 2011
Location: Northern Colorado
Posts: 969
|
Since the Service Six is a double action revolver, this may be more helpful:
http://youtu.be/kkyRDM7md9A And reassembly: http://youtu.be/OiWkxSgi4IA There are specific vids that show how to do the Service/Speed 6. Just do a search on YouTube. Here is a link to the manual that gives instructions: https://ruger-docs.s3.amazonaws.com/...ecuritySix.pdf Here's a vid that is for the Service 6: http://youtu.be/96lc7XGZIxE Last edited by Dan-O; January 10, 2013 at 04:17 PM. |
January 10, 2013, 05:46 PM | #6 |
Senior Member
Join Date: January 18, 2006
Location: Bowling Green,KY
Posts: 433
|
Thanks! I may give it a try. I have tuned a few rifle triggers and a MKiii.
__________________
Bowling Green, KY |
|
|