The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old May 10, 2015, 12:04 PM   #1
wjarrell
Member
 
Join Date: May 25, 2014
Posts: 57
increased powder charge

I was shooting 168 gr berger with 42 grains of varget out of my 18" barreled 308 with sub moa groups. I was able to increase the powder charge to 44 grains and still get sub moa group without showing any pressure signs on the casing. Any idea how much velocity I gained if any with the 2 grains of varget out of my 18" barrel?
wjarrell is offline  
Old May 10, 2015, 12:55 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 21,060
QuickLOAD puts it at around 110 fps difference, but it can vary some depending on which 168 grain Berger bullet I choose and what make of case's capacity I choose and what COL I use.

Hodgdon's data says 46 grains is maximum with the Sierra match 168 in a Winchester case, so it's no surprise you are not having a pressure issue.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04774 seconds with 8 queries