|
January 16, 2010, 10:30 PM
|
#1 |
|
Member
Join Date: April 2, 2009
Location: Western Washington
Posts: 57
|
P22 Barrel Swap
I bought a used Walther P22. It started out as a 5". But, was chopped to 3.4" with a special adapter replacing the barrel nut in order to fit a specific suppressor.
With the barrel nut/adapter removed, it is exactly like the OEM 3.4" barrel as far as I can tell. My problem is, that I want to put a 5" barrel kit on it for the increased sight radius. But, I can't seem to get the barrel past the ejector when I slide it rearward per the instructions in the handbook. Has anyone had any experience with this? What am I missing? |
|
|
January 17, 2010, 12:03 AM
|
#2 |
|
Senior Member
Join Date: September 14, 2007
Location: Yuma county Arizona
Posts: 248
|
You should be able to just wiggle/lift/push it past the ejector:
http://www.youtube.com/watch?v=QoOwn9n-Igo If you need to remove the extractor, download the "Walther P22 Bible" for detailed instructions: http://www.freespeech.com/1917-1911M_P22_bible.pdf Regards, Greg |
|
|
 |
| Thread Tools | Search this Thread |
|
|
