![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: December 9, 1999
Posts: 4,131
|
Looking for "slugging load" for .45 Colt using W231
Subject says it all. I have plenty W231 around. I'll be sacrificing one of my 300 RFN GC's for the slugging. Suggestions?
Oh yeah...it's for a 5.5" Bisley. Remember, it' just a slugging load, so I need to be able to recover the bulet in pristine condition, from a bucket with towels in it.
__________________
Favor the X. Steve Smith NRA Life Member |
![]() |
![]() |
#2 |
Senior Member
Join Date: March 16, 1999
Location: So. CA Mountains
Posts: 540
|
Steve,
Have you given any consideration to obtaining a pure lead slug of appropriate size and pounding it through your barrel ? http://www.beartoothbullets.com/index.htm can provide them, I think. I'd expect problems doing what you propose ![]() Tom
__________________
There are damn few situations so screwed up that adding government to them will not make 'em worse... The best homeland security is an armed & informed citizenery! Molon Labe! |
![]() |
![]() |
#3 |
Senior Member
Join Date: December 9, 1999
Posts: 4,131
|
obtaining a pure lead slug of appropriate size and pounding it through your barrel
Yes, as a matter of fact. I'll be trying this first, this week, as soon as the gun comes in. (I have to do this before I order a bullet sizing die for the lubrisizer). If I can't get good results, I'll fall back on the "shoot a really weak load" method.
__________________
Favor the X. Steve Smith NRA Life Member |
![]() |
![]() |
#4 |
Senior Member
Join Date: April 5, 2000
Posts: 105
|
I'd try something like 3 grs. If it's too light you'll have to knock it out with a rod. If it's too much then try 2 1/2 grs. I don't think you find any set rule for this ---- each revolver is different.
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: November 22, 1999
Location: Green Country, OK
Posts: 782
|
Steve, you mentioned getting a sizer. Not all of them produce the size bullet indicated on them. I have several that are +/- .001 from what's marked. Be sure you check size AFTER going through the die. Mine are all Lyman or RCBS.
__________________
safety first |
![]() |
![]() |
#6 |
Senior Member
Join Date: December 9, 1999
Posts: 4,131
|
I will be buying a Magma Star sizer. With the reputation and price that it has, it had better be right.
__________________
Favor the X. Steve Smith NRA Life Member |
![]() |
![]() |
#7 |
Member
Join Date: April 17, 2001
Location: NJ, USA
Posts: 70
|
Go with what Swifter said, it is the proper way. (did I say safer?)
|
![]() |
![]() |
#8 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
Actually, firing a soft lead bullet through the barrel as a means of slugging the bore is one HELL of a good way to do it.
Slugging a revolver means either pulling the barrel from the frame, or slugging from the muzzle, which can cause its own series of wonderous little problems, such as an F'ed up crown. I've slugged quite a few guns using the "fire slugging" method. Works like a champ. Most of the time it has been with .38 Spls./.357 Mags., using a 148-gr. HBWC and about .5 grains of WW 231. The catch method is a box with a bunch of old towels and other fabric. For obvious reasons, I try to do this at the range.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
![]() |
![]() |
#9 |
Senior Member
Join Date: December 9, 1999
Posts: 4,131
|
Thanks Mike, I admist I was quite surprised to get as many "don't do it" replies. I have had several acquaintances to do it successfully.
With the low report of .5 grains of powder, I can do this at home easily. It's a rural area.
__________________
Favor the X. Steve Smith NRA Life Member |
![]() |
![]() |
|
|