January 15, 2013, 10:59 PM | #1 |
Senior Member
Join Date: November 30, 2010
Posts: 3,513
|
Beretta 92 Mag Springs
I see on the Wolf springs website they have +5% and +10% power mag springs for the 15rd Beretta 92 mags. Can anyone recommend one over the other, or should I just try to get them strait from the factory?
Last edited by Dragline45; January 15, 2013 at 11:25 PM. |
January 15, 2013, 11:37 PM | #2 |
Senior Member
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,834
|
Never had a need, I use mec gar 18 rounds.
|
January 15, 2013, 11:46 PM | #3 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
"From the factory"- I assume you mean the Wolff factory? The standard Wolff spring is fine. The new Beretta replacement springs (from Beretta) are horrendously weak- weaker than the worn one's we were replacing.
Backstory: We had the Beretta 92D as duty weapons at my dept, and several months prior to Switching over To Sigs, we ordered a large quantity of magazine springs, mainsprings, recoil springs, firing pin springs, etc. All but the magazine springs were of good quality, but I would not recommend Beretta mag springs to anyone.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
January 16, 2013, 12:13 AM | #4 | |
Senior Member
Join Date: November 30, 2010
Posts: 3,513
|
Quote:
10-96 thanks for the reply. Instead of ordering spares to keep around ill order a couple more to replace the factory beretta springs as well. Last edited by Dragline45; January 16, 2013 at 12:24 AM. |
|
|
|